ANSI Z 124.3返回 Back
| Test item 测试名称： | |
| American National Standard for Plastic Lavatories 塑料洗脸盆的美国国家标准 | |
| Test info 测试内容： | |
| Clause | Test Requirement |
| 2 | General requirement 普通要求 |
| 2.1 | Material 材料 |
| 2.2 | Dimensional tolerances 尺寸偏差 |
| 2.6 | Identification 鉴别 |
| 3 | Workmanship and finish 工艺与外观 |
| 4 | Structural integrity of complete units (all types) 整体产品的结构整体检查 |
| 4.2 | Drain fitting connection 排水连接件的试验 |
| 4.3 | Point impact loads 点冲击试验 |
| 4.4 | Loads on lavatory tops 脸盆表面的负载试验 |
| 5 | Physical characteristics of materials (all types) 材料的物理性状 |
| 5.1 | Colorfastness test 退色试验 (specific condition)(MR) |
| 5.2 | Stain resistance test 耐污染性测试 |
| 5.3 | Wear and cleanability test 磨耗与清洁能力测试 |
| 5.4 | Cigarette test 香烟测试 |
| 5.5 | Chemical resistance test 抗化学测试 |
| 5.6 | Thermal shock resistance test 冷热冲击测试 |
| 6 | Additional material tests 附加材料测试 |
| 6.1.1 | Hot water resistance test method (type 1,2and3) 抗热水测试（用于型号1，型号2以及型号3） |
| 6.1.2 | Thermal shock resistance test method (type 3,4and 5) 抗热冲击测试 （用于型号3，型号4以及型号5） |
| Sampling requirement: 3 sets of completed samples with assembly instruction (if applicable) , Another samples should be supplied. As follow: | |
| 3 pcs of approximately 95mm*95mm & 2 pcs of approximately 150mm*150mm | |
| the flat specimen material made from the same materials as the units; 3 pcs of samples with size 4” X 15” | |
| 样品要求：全套样品3套并包含安装说明书（如适用），需要另外提供下面的样品：3片尺寸约为95mm*95mm & 2片尺寸约为150mm*150mm的平面样品，样品的材料要与产品材料相同。3片4"X15"的样品 | |
| Turnaround time: normal (23 working days); | |
| 所需时间：标准（23个工作日） | |
Sample for reference 参考图片:
Sample Report 报告样本：
