AS 1371返回 Back
| Test item 测试名称：Toilet Seats of Moulded Plastics 模压塑料的坐便圈 | |
| Test info 测试内容： | |
|
Clause |
Test Requirement |
|
3 |
Material 材料 |
|
3.1 |
Plastics materials for seats and flaps 便圈以及便盖的塑料材料 Excluding the ageing test （老化试验除外） |
|
3.2 |
Buffer materials 缓冲器材料 |
|
3.3 |
Materials for hingeing devices and bolts and nuts 铰链设计以及螺栓螺帽的设计 |
|
3.3.1 |
Stainless steel 不锈钢 |
|
3.3.2 |
Copper alloy 铜合金 |
|
3.4 |
Washers 垫圈 (same to clause 3.3) |
|
4 |
Design 设计 |
|
5 |
Workmanship 工艺 |
|
6 |
Dimensions 尺寸 |
|
7 |
Test Requirement 测试要求 |
| Water absorption (Non-rigid only) 吸水率（非坚硬的样品）(for seat or cover) | |
| Impact resistance 抗冲击性 （for seat or cover) | |
| Rigidity (Applicable to seats made of rigid plastic only) 坚硬度测试（适合用坚硬塑料制成的便圈） | |
| Rigidity (Applicable to flaps made of rigid plastic only) 坚硬度测试（适合用坚硬塑料制成的便盖） | |
| Staining by the cover or seat 被着色性 | |
|
9 |
Marking 商标 |
| Sampling Requirement: 3 sets of completed products with assembly instruction (if applicable） | |
| 样品要求： 全套样品3套并包含安装说明书（如适用） | |
| Turnaround time: normal (9 working days)； express（7 working days） | |
| 所需时间： 标准（9个工作日）；加快（7个工作日） | |
| Note: Rigid — plastics that have a modulus of elasticity in flexure or tension greater than 700 Mpa. | |
| 注：坚硬材料—拉伸试验的弹性模数大于700 Mpa的塑料。 | |
Sample for reference 参考图片:
Sample Report 报告样本：
