Test item 测试名称: 
The ignitability of bedcovers and pillows by smouldering and flaming ignition sources
被罩, 枕头的闷烧及火焰燃烧
 
Test info 测试内容:
 
BS 7175

The ignitability of bedcovers and pillows by smouldering and flaming ignition sources 
床上用品,枕头的闷烧及火焰燃烧
Section two. Pillows and continental quilts枕头和天鹅绒被子的闷烧和火焰测试
0 Cigarette 1) 每种火源 4 件样品;
2) 
枕头送全尺寸样品;
3) 
被子最小尺寸 650X650X实际厚度,围边和装饰与实际样品一致
1 Butane gas flame
2 Butane gas flame
3 Butane gas flame
4 Pine wood crib
5 Pine wood crib
6 Pine wood crib
7 Pine wood crib
Section three. Individual bedcovers床上用品(包括床垫罩、被单、枕套、毯子、床单、天鹅绒被罩等)单独闷烧和火焰测试
0 Cigarette 1) 每种火源 4 件样品;
2
) 0号香烟测试样品: 最小450X1350mm
1 
 7号火源样品: 最小650X650mm
1 Butane gas flame
2 Butane gas flame
3 Butane gas flame
4 Pine wood crib
5 Pine wood crib
6 Pine wood crib
7 Pine wood crib
Section Four. Composite of known bedcovers and pillows床上用品和枕头的组合测试
0 Cigarette 2 套成品
1 Butane gas flame 2 套成品
2 Butane gas flame 2 套成品
3 Butane gas flame 2 套成品
4 Pine wood crib 2 套成品
5 Pine wood crib 2 套成品
6 Pine wood crib 2 套成品
7 Pine wood crib 2 套成品



1) Section 2
Pillows and continental quilts tested with smouldering and flaming ignition sources
 
Smouldering 0 Cigarette
Flaming 1 Butane gas flame
2 Butane gas flame
3 Butane gas flame
4 Pine wood crib
5 Pine wood crib
6 Pine wood crib
7 Pine wood crib
 
Sample required:  4 pieces for each ignition source) 
1) the test specimen shall be representative of the components and make-up of the finished item.
2) for pillows, the test specimen shall be a full size item.
3) for continental quilts, the test specimen shall be of minimum size 650 x 650 x nominal thickness of the finished item. the intended quilting, channeling and edge finishing of the proposed item shall be included in the test specimen. 
 
2) Section 3
Individual bedcovers tested with smouldering and flaming ignition sources
 
Smouldering 0 Cigarette
Flaming 1 Butane gas flame
2 Butane gas flame
3 Butane gas flame
4 Pine wood crib
5 Pine wood crib
6 Pine wood crib
7 Pine wood crib
 
Sample required:  4 pieces for each ignition source
1) the test specimen shall be representative of the components and make-up of the finished item.
2) the size of the test specimens shall be as follows:
a) for cigarette ignition source 0: 450 x 1350mm minimum to allow for folding three times.
b) for flaming ignition sources 1 to 7: 650 x 650mm minimum to allow for an overhang of 150mm.
 
3) Section 4
Composite of known bedcovers and pillows tested with smouldering and flaming ignition sources
 
Smouldering 0 Cigarette
Flaming 1 Butane gas flame
2 Butane gas flame
3 Butane gas flame
4 Pine wood crib
5 Pine wood crib
6 Pine wood crib
7 Pine wood crib
 
Sample required:   
1) the test specimens shall be representative of the components and make-up of the finished assembly of bedcovers and pillows and of the order on which the bedcovers and pillows are laid on a mattress.
2) the test specimens shall be rectangular in shape and of minimum size 650x650mm to allow for overhang of the test specimen. The pillow used in the composite shall be a minimum of half-scale size.
 
Lead time 测试周期: 常规 Regular service 10 working days
 
Others 其他信息:
 
Typical Sample 典型例子
Low Hazard Offices 办公室
Schools 学校
Colleges 专上学院
Universities 大学
Museums 博物馆
Exhibitions 展览场地
Day centres 日间中心
     
Medium Hazard Hotel bedrooms 酒店房间
Public buildings 公用楼宇
Restaurants 餐馆
Services' messes 机构俱乐部
Places of public entertainment 公众娱乐场所
Public halls 公用会堂
Public houses and bars 公用楼宇及酒吧
Casinos 赌场
Hospitals 医院
Hostels 旅馆
     
High Hazard Sleeping accommodation in certain hospital wards and In certain hostels  某些医院病房及某些旅馆供人睡觉的地方
Offshore installations 近岸设施
     
Very High Hazard Prison cells   监狱囚室


Sample Report 报告样本:

Responsive imageResponsive imageResponsive imageResponsive imageResponsive image



Sample for reference 参考图片:

Responsive image