CSA B 45.5返回 Back
| Test item 测试名称： Platic Plumbing Fixture 塑料卫浴产品 | |
| Norm refer 涉及标准: CSA B45.0 | |
| Test info 测试内容： | |
| Clause | Test Requirement |
| CSA B45.0 | General Requirements for Plumbing Fixtures - Lavatory |
| 卫浴产品的一般要求 — 洗脸盆 | |
| 3 | General Requirments 普通要求 |
| 3.1 | Blemishes and Defects 欠点 |
| 3.2 | Voids 针眼 |
| 3.3 | Surface Finishes 表面加工 |
| 4 | Test Requirement 测试要求 |
| 4.1 | Warpage Tolerances for All Fixtures 热变形 |
| 4.2 | Thermal Test 热冲击测试 |
| 4.3 | Water Absorption through Cross-Section of Fixture 截面积的吸水率 |
| 4.4 | Colourfastness 色劳度 |
| 4.5 | Stain Resistance 抗着色剂 |
| 4.6 | Cleanability and Wear 磨损及清洁能力试验 |
| 4.7 | Delamination 分层 |
| 4.8 | Resistance to Cigarette Burns 抗香烟燃烧 |
| 4.9 | Ignitability of the unexposed Surface 不暴露面的可燃性能 |
| 4.1 | Point Impact 点冲击 |
| 4.11 | Drain Fitting Connection 排水连接件的试验 |
| 4.12 | Hot-oil and Hot-pot Tests - Kitchen 热油和热锅测试 |
| Sampling requirement: 2 sets of completed samples with assembly instruction (if applicable) | |
| 样品要求：全套样品2套，并伴随安装说明书（如果适用） | |
| Turnaround time: normal (7 working days); express (5 working days) | |
| 所需时间：标准（7个工作日）； 加快（5个工作日） | |
Sample for reference 参考图片:
Sample Report 报告样本：
