EN17128,个人轻型电动车辆返回 Back

EN17128,个人轻型电动车辆 
Non-approved light motorized vehicles for the transportation of persons and goods and related facilities-Personal light electric vehicles (PLEV)-Safety requirements and test methods
Scope
范围
自备电源，一人使用，可以在公共场所或私人场所使用，电池电压≤100VDC，或/和集成电池充电器输入电压≤240VDC,最大速度≤25km/h,以下产品不在本标准范围内：
1. 玩具
2. 无自平衡系统但有座位的车辆
3. 竞赛类
4. EPAC
5. 医用
6. 最大速度超过25km/h
7. 额定电压超过100VDC或240VAC
Section Test Requirement
5 General safety requirements and protective measures (EN ISO 12100)
6 Electrical components
7 Driving power management
7.1 Driving power management
7.1.1 Requirement
　 Driving power cut off test
　 mechanical brake system (参照、Clause 15.4.2)
　 Electric brake system
　 Self-balanceing vehicles speed
　 Overspeed requirement
　 Overheating requirement
　 Insufficient battery power
7.1.2 Test method
　 加速度测试
8 Speed limitation
8.1 Pedestrian mode
8.2 Speed limited to 6km/h
8.3 Maximum speed mode
　 全电动
　 混合动力
9 Electromagnetic compatibility
10 Charging batteries
11 Energy storage within the vehicle
12 Structural integrity
12.1 General
12.2 Static load test
12.2.1 Deck/frame
12.2.1.1 Requirement
12.2.1.2
Test method-2-wheeled single track vehicle
适用以下类型产品
12.2.1.3


Test method-3-wheeled vehicle 
适用以下类型产品
12.2.1.4


Test method-self-balance vehicle 
适用以下类型产品
12.2.2 Handle bar and steering column
12.2.2.1 Bending test
12.2.2.2 Vertical loading test
12.2.2.3 Torque test
12.2.2.4 Handlebar grips and plugs
12.2.2.5 Telescopic handlebar (if fitted)
12.3 Frontal impact resistance
12.3.1 Requirements for class 2
12.3.2 Test method for vehicle of class 2
12.3.3 Requirements for class 4
12.3.4 Test method for vehicle of class 4
12.4 Fatigue test (dynamic)
12.4.1 General
12.4.2 Requirements
12.4.3 Test method for a 2-wheeled single track vehicle
12.4.4 Test method for a 3-wheeled single track vehicle
12.4.5 Test method for a self-balancing vehicle
13 Edges and protrusions
14 Moving parts
14.1 Clearance between moving parts
14.2 Guarding of moving parts
14.3 Folding mechanism
15 Adequate stability
15.1 Footrest/deck
15.2 Handlebar adjustment
15.3 Surface
15.3.1 Slippery surface
15.3.2 Irregular surface
15.4 Braking device
15.4.1 General
15.4.2 Braking performance
15.4.2.1 General requirements
15.4.2.2 Hand operated braking system-Strength test
15.4.2.3 Dry stop
15.4.2.4 Vehicle behaviour during braking
15.4.2.5 Electric failure braking system
15.4.2.6 Parking device
15.4.3 Test method
16 Presence awareness
16.1 Visual signalling
16.1.1 Retro-reflector for presence awareness
反光片ISO 6742-2
16.1.2 Front and rear lighting for presence awareness
灯按照ISO 6742-1
16.2 Audible signal for third parties
ISO 14878, Class II
17 Failure and malfunctional warning
17.1 General
17.2 Audible/vibrating sigalling
17.3 Loss of connection to the warning system
18 Hot surface
19 Product information and marking
19.1 General
19.2 Marking
19.2.1 General
19.2.2 Durability of marking of the frame or chasis
19.2.3 Battery
19.2.4 Tyres
19.3 Purchase information
19.4 Instruction for use
19.4.1 General 
19.4.2 Noise emission
19.4.3 Battery charging
19.5 Instruction for serving and maintenance
sample size:  5pieces  +EE及外包
样品要求: 5件
Turnaround time: normal(15 working days) 
工作天: 普通件(15个工作天)


Responsive image