EN 13407返回 Back
| Test item 测试名称： | |
| Wall-hung urinals —Functional requirements and test methods 卫生设备—挂壁小便器—功能要求以及测试方法 | |
| Test info 测试内容： | |
| Clause | Test Requirement |
| 4 | General 一般要求 |
| 4.1 | Flushing volume and flow rate 冲洗水量及流速 |
| 6.1 | Depth of water seal 水封深度 |
| 6.2.1 | Wash of bowl 洗净面的冲洗性能 |
| 6.2.2 | Flushing of three plastics balls 3个小塑料球的冲洗性能 |
| 6.2.3 | Oversplashing 溅水检查 |
| 6.2.4 | Discharge 溢出测试 |
| 6.3 | Water absorption 吸水率 |
| 6.4 | Load resistance 负载测试 |
| 4.6 | Durability of class 1 products 耐久性 |
| Sampling requirement: 2 set of completed samples with assembly instruction (if applicable) & 1 pc of sample with a diameter 110 mm and a 8 mm hole in the centre （For samples with coating). | |
| 样品要求：全套样品2套，并伴随安装说明书（如果适用）& 1片直径为110mm的圆形样品，样品中间有8mm直径的孔(适用于带涂层的产品)。 | |
| Turnaround time: normal (9 working days); express (7 working days) | |
| 所需时间：标准（9个工作日）； 加快（7个工作日） | |
Sample for reference 参考图片:
Sample Report 报告样本：
