HZLAB20211018返回 Back
中国
| SCOPE OF ACCREDITATION | |
| Electrical Safety Testing – Household and Appliances | |
|
IEC 50636-2-91 EN 50636-2-91 DIN EN 50636-2-91 GB 4706.54 |
Household and similar electrical appliances — Safety Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers, Exception: Section 20.102 Noise, Section 20.103 Vibration |
|
EN 50636-2-94 DIN EN 50636-2-94 |
Household and similar electrical appliances - Safety – Particular requirements for scissors type grass shears, Exception: Section 20.103 Noise, Section 20.104 Vibration |
|
EN 50636-2-100 DIN EN 50636-2-100 BS EN 50636-2-100 GB 4706.79 UL 1017 |
Household and similar electrical appliances — Safety Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums, Exception: Section 20.103 Noise, Section 20.104 Vibration |
|
IEC 60335-1 EN 60353-1 DIN EN 60335-1 GB 4706.1 |
Household and similar electrical appliances — Safety Part 1: General requirements |
|
IEC 60335-2-2 EN 60335-2-2 DIN EN 60335-2-2 GB 4706.7 |
Household and similar electrical appliances — Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
|
IEC 60335-2-3 EN 60335-2-3 DIN EN 60335-2-3 GB 4706.2 UL 1005 |
Household and similar electrical appliances — Safety Part 2-3: Particular requirements for electric irons |
|
IEC 60335-2-4 EN 60335-2-4 DIN EN 60335-2-4 GB 4706.26 |
Household and similar electrical appliances — Safety Part 2-4: Particular requirements for spin extractors |
|
IEC 60335-2-5 EN 60335-2-5 DIN EN 60335-2-5 GB 4706.25 |
Household and similar electrical appliances — Safety Part 2-5: Particular requirements for dishwashers |
|
IEC 60335-2-6 EN 60335-2-6 DIN EN 60335-2-6 GB 4706.22 |
Household and similar electrical appliances — Safety Part 2-6: Particular requirements for Stationary cooking ranges, hobs, ovens and similar appliances |
|
IEC 60335-2-7 EN 60335-2-7 DIN EN 60335-2-7 GB 4706.24 UL 2157 |
Household and similar electrical appliances — Safety Part 2-7: Particular requirements for washing machines |
|
IEC 60335-2-8 EN 60335-2-8 DIN EN 60335-2-8 GB 4706.9 |
Household and similar electrical appliances — Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances |
|
IEC 60335-2-9 EN 60335-2-9 DIN EN 60335-2-9 GB 4706.14 UL 1026 |
Household and similar electrical appliances — Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
|
IEC 60335-2-10 EN 60335-2-10 DIN EN 60335-2-10 GB 4706.57 |
Household and similar electrical appliances — Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines |
|
IEC 60335-2-11 EN 60335-2-11 DIN EN 60335-2-11 GB 4706.20 |
Household and similar electrical appliances — Safety Part 2-11: Particular requirements for tumble dryers |
|
IEC 60335-2-12 EN 60335-2-12 DIN EN 60335-2-12 GB 4706.55 |
Household and similar electrical appliances — Safety Part 2-12: Particular requirements for warming plates and similar appliances |
|
IEC 60335-2-13 EN 60335-2-13 DIN EN 60335-2-13 GB 4706.56 UL 1083 |
Household and similar electrical appliances — Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances |
|
IEC 60335-2-14 EN 60335-2-14 DIN EN 60335-2-14 GB 4706.30 UL 982 |
Household and similar electrical appliances — Safety Part 2-14: Particular requirements for kitchen machines |
|
IEC 60335-2-15 EN 60335-2-15 DIN EN 60335-2-15 GB 4706.19 UL 1082 |
Household and similar electrical appliances — Safety Part 2-15: Particular requirements for appliances for heating liquids |
|
IEC 60335-2-21 EN 60335-2-21 DIN EN 60335-2-21 GB 4706.12 |
Household and similar electrical appliances — Safety Part 2-21: Particular requirements for storage water heaters |
|
IEC 60335-2-23 EN 60335-2-23 DIN EN 60335-2-23 GB 4706.15 |
Household and similar electrical appliances — Safety Part 2-23: Particular requirements for appliances for skin or hair care |
|
IEC 60335-2-24 EN 60335-2-24 DIN EN 60335-2-24 GB 4706.13 |
Household and similar electrical appliances — Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
|
IEC 60335-2-25 EN 60335-2-25 DIN EN 60335-2-25 GB 4706.21 UL 923 |
Household and similar electrical appliances — Safety Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens |
|
IEC 60335-2-28 EN 60335-2-28 DIN EN 60335-2-28 GB 4706.74 |
Household and similar electrical appliances — Safety Part 2-28: Particular requirements for sewing machines |
|
IEC 60335-2-29 EN 60335-2-29 DIN EN 60335-2-29 GB 4706.18 UL 1310 |
Household and similar electrical appliances — Safety Part 2-29: Particular requirements for battery chargers |
|
IEC 60335-2-30 EN 60335-2-30 DIN EN 60335-2-30 GB 4706.23 |
Household and similar electrical appliances — Safety Part 2-30: Particular requirements for room heaters |
|
IEC 60335-2-31 EN 60335-2-31 DIN EN 60335-2-31 GB 4706.28 |
Household and similar electrical appliances — Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors |
|
IEC 60335-2-32 EN 60335-2-32 DIN EN 60335-2-32 GB 4706.10 |
Household and similar electrical appliances — Safety Part 2-32: Particular requirements for massage appliances |
|
IEC 60335-2-35 EN 60335-2-35 DIN EN 60335-2-35 GB 4706.11 |
Household and similar electrical appliances — Safety Part 2-35: Particular requirements for instantaneous water heaters |
|
IEC 60335-2-36 EN 60335-2-36 DIN EN 60335-2-36 GB 4706.52 |
Household and similar electrical appliances — Safety Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
|
IEC 60335-2-37 EN 60335-2-37 DIN EN 60335-2-37 GB 4706.33 |
Household and similar electrical appliances — Safety Part 2-37: Particular requirements for commercial electric deep fat fryers |
|
IEC 60335-2-38 EN 60335-2-38 DIN EN 60335-2-38 GB 4706.37 |
Household and similar electrical appliances — Safety Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
|
IEC 60335-2-39 EN 60335-2-39 DIN EN 60335-2-39 GB 4706.40 |
Household and similar electrical appliances — Safety Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
|
IEC 60335-2-40 EN 60335-2-40 DIN EN 60335-2-40 GB 4706.32 |
Household and similar electrical appliances — Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
|
IEC 60335-2-41 EN 60335-2-41 DIN EN 60335-2-41 GB 4706.66 |
Household and similar electrical appliances — Safety Part 2-41: Particular requirements for pumps |
|
IEC 60335-2-43 EN 60335-2-43 DIN EN 60335-2-43 GB 4706.60 |
Household and similar electrical appliances — Safety Part 2-43: Particular requirements for clothes dryers and towel rails |
|
IEC 60335-2-44 EN 60335-2-44 DIN EN 60335-2-44 GB 4706.83 |
Household and similar electrical appliances — Safety Part 2-44: Particular requirements for ironers |
|
IEC 60335-2-45 EN 60335-2-45 DIN EN 60335-2-45 |
Household and similar electrical appliances-Particular requirements for portable heating tools and similar appliances |
|
IEC 60335-2-47 EN 60335-2-47 DIN EN 60335-2-47 GB 4706.35 |
Household and similar electrical appliances — Safety Part 2-47: Particular requirements for commercial electric boiling pans |
|
IEC 60335-2-48 EN 60335-2-48 DIN EN 60335-2-48 GB 4706.39 |
Household and similar electrical appliances — Safety Part 2-48: Particular requirements for commercial electric grillers and toasters |
|
IEC 60335-2-49 EN 60335-2-49 DIN EN 60335-2-49 GB 4706.51 |
Household and similar electrical appliances — Safety Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
|
IEC 60335-2-50 EN 60335-2-50 DIN EN 60335-2-50 GB 4706.62 |
Household and similar electrical appliances — Safety Part 2-50: Particular requirements for commercial electric bains-marie |
|
IEC 60335-2-51 EN 60335-2-51 DIN EN 60335-2-51 GB 4706.71 |
Household and similar electrical appliances — Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
|
IEC 60335-2-52 EN 60335-2-52 DIN EN 60335-2-52 GB 4706.59 |
Household and similar electrical appliances — Safety Part 2-52: Particular requirements for oral hygiene appliances |
|
IEC 60335-2-53 EN 60335-2-53 DIN EN 60335-2-53 GB 4706.31 |
Household and similar electrical appliances — Safety Part 2-53: Particular requirements for sauna heating appliances and infrared cabins |
|
IEC 60335-2-54 EN 60335-2-54 DIN EN 60335-2-54 GB 4706.61 |
Household and similar electrical appliances — Safety Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam |
|
IEC 60335-2-58 EN 60335-2-58 DIN EN 60335-2-58 GB 4706.50 |
Household and similar electrical appliances — Safety Part 2-58: Particular requirements for commercial electric dishwashing machines |
|
IEC 60335-2-65 EN 60335-2-65 DIN EN 60335-2-65 GB 4706.45 |
Household and similar electrical appliances — Safety Part 2-65: Particular requirements for air-cleaning appliances |
|
IEC 60335-2-77 EN 60335-2-77 DIN EN 60335-2-77 GB 4706.78 UL 1447 |
Household and similar electrical appliances — Safety Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
|
IEC 60335-2-78 EN 60335-2-78 DIN EN 60335-2-78 GB 4706.106 |
Household and similar electrical appliances — Safety Part 2-78: Particular requirements for outdoor barbecues |
|
IEC 60335-2-79 EN 60335-2-79 DIN EN 60335-2-79 GB 4706.89 |
Household and similar electrical appliances — Safety Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
|
IEC 60335-2-80 EN 60335-2-80 DIN EN 60335-2-80 GB 4706.27 UL 507 |
Household and similar electrical appliances — Safety Part 2-80: Particular requirements for fans |
|
IEC 60335-2-91 EN 60335-2-91 DIN EN 60335-2-91 GB 4706.54 |
Household and similar electrical appliances — Safety Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
|
IEC 60335-2-98 EN 60335-2-98 DIN EN 60335-2-98 GB 4706.48 |
Household and similar electrical appliances — Safety Part 2-98: Particular requirements for humidifiers |
|
IEC 60335-2-100 EN 60335-2-100 DIN EN 60335-2-100 GB 4706.79 UL 1017 |
Household and similar electrical appliances — Safety Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
|
IEC 62233 EN 62233 DIN EN 62233 |
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| Electrical Safety Testing – Tools | |
|
IEC 60745-1 EN 60745-1 DIN EN 60745-1 GB 3883.1 UL 60745-1 |
Hand-held motor-operated electric tools — Safety Part 1: General requirements, Exception: Section 31.2 Laser Test, Section 6 Environmental Requirement |
|
IEC 60745-2-1 EN 60745-2-1 DIN EN 60745-2-1 UL 60745-2-1 |
Hand-held motor-operated electric tools — Safety Part 2-1: Particular requirements for drills and impact drills Exception: Section 6 Environmental Requirement GB 3883.6 |
|
IEC 60745-2-2 EN 60745-2-2 DIN EN 60745-2-2 GB 3883.2 UL 60745-2-2 |
Hand-held motor-operated electric tools — Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-3 EN 60745-2-3 DIN EN 60745-2-3 GB 3883.3 UL 60745-2-3 |
Hand-held motor-operated electric tools — Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-4 EN 60745-2-4 DIN EN 60745-2-4 GB 3883.4 UL 60745-2-4 |
Hand-held motor-operated electric tools — Safety Part 2-4: Particular requirements for sanders and polishers other than disk type, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-5 EN 60745-2-5 DIN EN 60745-2-5 GB 3883.5 UL 60745-2-5 |
Hand-held motor-operated electric tools — Safety Part 2-5: Particular requirements for circular saws, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-6 EN 60745-2-6 DIN EN 60745-2-6 GB 3883.7 UL 60745-2-6 |
Hand-held motor-operated electric tools — Safety Part 2-6: Particular requirements for hammers, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-8 EN 60745-2-8 DIN EN 60745-2-8 GB 3883.8 UL 60745-2-8 |
Hand-held motor-operated electric tools — Safety Part 2-8: Particular requirements for shears and nibblers, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-9 EN 60745-2-9 DIN EN 60745-2-9 UL 60745-2-9 |
Hand-held motor-operated electric tools — Safety Part 2-9: Particular requirements for tappers, Exception: Section 6 Environmental Requirement GB 3883.9 |
|
IEC 60745-2-11 EN 60745-2-11 DIN EN 60745-2-11 GB 3883.11 UL 60745-2-11 |
Hand-held motor-operated electric tools — Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws), Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-12 EN 60745-2-12 DIN EN 60745-2-12 GB 3883.12 UL 60745-2-12 |
Hand-held motor-operated electric tools — Safety Part 2-12: Particular requirements for concrete vibrators, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-14 EN 60745-2-14 DIN EN 60745-2-14 GB 3883.10 UL 60745-2-14 |
Hand-held motor-operated electric tools — Safety Part 2-14: Particular requirements for planers, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-15 EN 60745-2-15 DIN EN 60745-2-15 UL 60745-2-15 |
Hand-held motor-operated electric tools — Safety Part 2-15: Particular requirements for hedge trimmers, Exception: Section 6 Environmental Requirement GB 3883.15 |
|
IEC 60745-2-16 EN 60745-2-16 DIN EN 60745-2-16 GB 3883.16 UL 60745-2-16 |
Hand-held motor-operated electric tools — Safety Part 2-16: Particular requirements for tackers, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-17 EN 60745-2-17 DIN EN 60745-2-17 GB3883.17 UL 60745-2-17 |
Hand-held motor-operated electric tools — Safety Part 2-17: Particular requirements for routers and trimmers, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-18 EN 60745-2-18 DIN EN 60745-2-18 GB 3883.20 UL 60745-2-18 |
Hand-held motor-operated electric tools — Safety Part 2-18: Particular requirements for strapping tools, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-19 EN 60745-2-19 DIN EN 60745-2-19 GB 3883.22 UL 60745-2-19 |
Hand-held motor-operated electric tools — Safety Part 2-19: Particular requirements for jointers, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-20 EN 60745-2-20 DIN EN 60745-2-20 GB 3883.21 UL 60745-2-20 |
Hand-held motor-operated electric tools — Safety Part 2-20: Particular requirements for band saws, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-21 EN 60745-2-21 DIN EN 60745-2-21 GB 3883.19 UL 60745-2-21 |
Hand-held motor-operated electric tools — Safety Part 2-21: Particular requirements for drain cleaners, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-22 EN 60745-2-22 DIN EN 60745-2-22 GB 3883.18 UL 60745-2-22 |
Hand-held motor-operated electric tools — Safety Part 2-22: Particular requirements for cut-off machines, Exception: Section 6 Environmental Requirement |
|
IEC 60745-2-23 EN 60745-2-23 DIN EN 60745-2-23 UL 60745-2-23 |
Hand-held motor-operated electric tools — Safety Part 2-23: Particular requirements for die grinders and small rotary tools, Exception: Section 6 Environmental Requirement |
|
IEC 61029-1 EN 61029-1 DIN EN 61029-1 |
Safety of transportable motor-operated electric tools Part 1: General requirements, Exception: Section 30 Radiation, Section 13 Environment Requirement |
|
IEC 61029-2-1 EN 61029-2-1 DIN EN 61029-2-1 GB 13960.2 |
Safety of transportable motor-operated electric tools Part 2-1: Particular requirements for circular saw benches, Exception: Section 13 Environment Requirement |
|
IEC 61029-2-3 EN 61029-2-3 DIN EN 61029-2-3 GB 13960.4 |
Safety of transportable motor-operated electric tools Part 2-3: Particular requirements for planers and thicknessers, Exception: Section 13 Environment Requirement |
|
IEC 61029-2-4 EN 61029-2-4 DIN EN 61029-2-4 GB 13960.5 |
Safety of transportable motor-operated electric tools Part 2-4: Particular requirements for bench grinders, Exception: Section 13 Environment Requirement |
|
IEC 61029-2-6 EN 61029-2-6 DIN EN 61029-2-6 GB 13960.7 |
Safety of transportable motor-operated electric tools Part 2-6: Particular requirements for diamond drills with water supply, Exception: Section 13 Environment Requirement |
|
IEC 61029-2-9 EN 61029-2-9 DIN EN 61029-2-9 GB 13960.9 |
Safety of transportable motor-operated electric tools Part 2-9: Particular requirements for mitre saws, Exception: Section 13 Environment Requirement |
|
IEC 61029-2-10 EN 61029-2-10 DIN EN 61029-2-10 GB 13960.11 |
Safety of transportable motor-operated electric tools Part 2-10: Particular requirements for cutting-off grinders, Exception: Section 13 Environment Requirement |
|
IEC 61029-2-11 EN 61029-2-11 DIN EN 61029-2-11 GB 13960.13 |
Safety of transportable motor-operated electric tools Part 2-11: Particular requirements for combined mitre and bench saws, Exception: Section 13 Environment Requirement |
|
IEC 62841-1 EN 62841-1 DIN EN 62841-1 UL 62841-1 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – General requirements, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-2-2 EN 62841-2-2 DIN EN 62841-2-2 UL 62841-2-2 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Particular requirements for hand-held screwdrivers and impact wrenches, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-2-4 EN 62841-2-4 DIN EN 62841-2-4 UL 62841-2-4 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Particular requirements for hand-held sanders and polishers other than disc type, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-2-5 EN 62841-2-5 DIN EN 62841-2-5 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-2-9 EN 62841-2-9 DIN EN 62841-2-9 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held tappers and threaders, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-2-11 EN 62841-2-11 DIN EN 62841-2-11 |
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Particular requirements for hand-held reciprocating saws, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-2-14 EN 62841-2-14 DIN EN 62841-2-14 UL 62841-2-14 |
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Particular requirements for hand-held planers, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-3-1 EN 62841-3-1 DIN EN 62841-3-1 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Particular requirements for transportable table saws, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-3-6 EN 62841-3-6 DIN EN 62841-3-6 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Particular requirements for transportable diamond drills with liquid system, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-3-9 EN 62841-3-9 DIN EN 62841-3-9 UL 62841-3-9 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Particular requirements for transportable mitre saws, Exception: Annex I Measurement of Noise and Vibration Emission |
|
IEC 62841-3-10 EN 62841-3-10 DIN EN 62841-3-10 |
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Particular requirements for transportable cut-off machines, Exception: Annex I Measurement of Noise and Vibration Emission |
| Safety Testing – Pneumatic Tools | |
|
EN 792-13 DIN EN ISO 792-13 |
Hand-held non-electric power tools -- Safety requirements. Part 13: Fastener driving tools, Exception: Section 5 (Speed of the nail, noise, vibration) |
|
ISO 11148-2 EN ISO 11148-2 DIN EN ISO 11148-2 |
Hand-held non-electric power tools — Safety requirements Part 2: Cutting-off and crimping power tools, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-3 EN ISO 11148-3 DIN EN ISO 11148-3 |
Hand-held non-electric power tools — Safety requirements Part 3: Drills and tappers. Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-4 EN ISO 11148-4 DIN EN ISO 11148-4 |
Hand-held non-electric power tools — Safety requirements Part 4: Non-rotary percussive power tools, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-5 EN ISO 11148-5 DIN EN ISO 11148-5 |
Hand-held non-electric power tools — Safety requirements Part 5: Rotary percussive drills, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-6 EN ISO 11148-6 DIN EN ISO 11148-6 |
Hand-held non-electric power tools — Safety requirements Part 6: Assembly power tools for threaded fasteners, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-7 EN ISO 11148-7 DIN EN ISO 11148-7 |
Hand-held non-electric power tools — Safety requirements Part 7: Grinders, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-8 EN ISO 11148-8 DIN EN ISO 11148-8 |
Hand-held non-electric power tools — Safety requirements Part 8: Sanders and polishers, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-9 EN ISO 11148-9 DIN EN ISO 11148-9 |
Hand-held non-electric power tools — Safety requirements Part 9: Die grinders, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-10 EN ISO 11148-10 DIN EN ISO 11148-10 |
Hand-held non-electric power tools — Safety requirements Part 10: Compression power tools, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-11 EN ISO 11148-11 DIN EN ISO 11148-11 |
Hand-held non-electric power tools — Safety requirements Part 11: Nibblers and shears, Exception: Section 5.2 Noise and Section 5.3 Vibration |
|
ISO 11148-12 EN ISO 11148-12 DIN EN ISO 11148-12 |
Hand-held non-electric power tools — Safety requirements Part 12: Circular, oscillating and reciprocating saws, Exception: Section 5.2 Noise and Section 5.3 Vibration |
| Mechanical Testing – Furniture, Leisure and Fitness Equipment | |
| AS/NZS 4790 | Furniture—Storage units— Determination of strength and durability |
| AS/NZS 4935 | Domestic furniture—Freestanding chests of drawers, wardrobes and bookshelves/bookcases—Determination of stability |
|
EN 581-1 BS EN 581-1 DIN EN 581-1 |
Outdoor furniture – Seating and tables for camping, domestic and contract use Part 1: General safety requirements |
|
EN 581-2 BS EN 581-2 DIN EN 581-2 |
Outdoor furniture - Seating and tables for camping, domestic and contract use – Part 2: Mechanical safety requirements and test methods for seating |
|
EN 581-3 BS EN 581-3 DIN EN 581-3 |
Outdoor furniture - Seating and tables for camping, domestic and contract use – Part 3: Safety, strength and durability requirements for tables |
| ISO 7170 | Furniture — Storage units — Determination of strength and durability |
| ISO 7171 | Furniture -- Storage units -- Determination of stability |
|
EN 15649-1 BS EN 15649-1 DIN EN 15649-1 |
Floating leisure articles for use on and in water Part 1: Classification, materials, general requirements and test methods |
|
EN 15649-2 BS EN 15649-2 DIN EN 15649-2 |
Floating leisure articles for use on and in water Part 2: Consumer information |
|
EN 15649-3 BS EN 15649-3 DIN EN 15649-3 |
Floating leisure articles for use on and in water Part 3: Additional specific safety requirements and test methods for Class A devices |
|
ISO 20957-1 EN ISO 20957-1 BS EN ISO 20957-1 DIN EN ISO 20957-1 |
Stationary training equipment Part 1: General safety requirement and test methods |
| Electrical Safety Testing – Luminaires | |
| GB 13961 | Electrical supply track systems for luminaires |
|
IEC 60598-1 EN 60598-1 DIN EN 60598-1 GB 7000.1 AS/NZS 60598.1 |
Luminaires Part 1: General requirements and tests, Exception: Section 9.2.1 and 9.2.2 (Dust proof), Section 4.24 Photo-biological Hazard |
|
IEC 60598-2-1 EN 60598-2-1 DIN EN 60598-2-1 GB 7000.201 AS/NZS 60598.2.1 |
Luminaires Part 2-1: Particular requirements — Specification for fixed general purpose luminaires |
|
IEC 60598-2-2 EN 60598-2-2 DIN EN 60598-2-2 GB 7000.202 AS/NZS 60598.2.2 |
Luminaires Part 2-2: Particular requirements — Recessed luminaires |
|
IEC 60598-2-3 EN 60598-2-3 DIN EN 60598-2-3 GB 7000.5 AS/NZS 60598.2.3 |
Luminaires Part 2-3: Particular requirements — Luminaires for road and street lighting |
|
IEC 60598-2-4 EN 60598-2-4 DIN EN 60598-2-4 GB 7000.204 AS/NZS 60598.2.4 |
Luminaires Part 2-4: Particular requirements — Portable general purpose luminaires |
|
IEC 60598-2-5 EN 60598-2-5 DIN EN 60598-2-5 GB 7000.7 AS/NZS 60598.2.5 |
Luminaires Part 2-5: Particular requirements — Floodlights |
|
IEC 60598-2-7 EN 60598-2-7 DIN EN 60598-2-7 GB 7000.207 AS/NZS 60598.2.7 |
Luminaires Part 2-7: Particular requirements — Portable luminaries for garden use |
|
IEC 60598-2-8 EN 60598-2-8 DIN EN 60598-2-8 GB 7000.208 AS/NZS 60598.2.8 |
Luminaires Part 2-8: Particular requirements — Hand lamps |
|
IEC 60598-2-10 EN 60598-2-10 DIN EN 60598-2-10 GB 7000.4 AS/NZS 60598.2.10 |
Luminaires Part 2-10: Particular requirements — Portable luminaires for children |
|
IEC 60598-2-12 EN 60598-2-12 DIN EN 60598-2-12 GB 7000.212 AS/NZS 60598.2.12 |
Luminaires - Particular requirements - Mains socket-outlet mounted nightlights |
|
IEC 60598-2-13 EN 60598-2-13 DIN EN 60598-2-13 |
Luminaires Part 2-13: Particular requirements - Ground recessed luminaires, Exception: Section 13.6.2.2 Shear Load Test, Section 13.6.3 Resistance to thermal shock |
|
IEC 60598-2-20 EN 60598-2-20 DIN EN 60598-2-20 GB 7000.9 AS/NZS 60598.2.20 |
Luminaires Part 2-20: Particular requirements — Lighting chains |
|
IEC 60598-2-21 EN 60598-2-21 DIN EN 60598-2-21 AS/NZS 60598.2.21 |
Luminaires Part 2-21: Particular requirements - Rope lights Exception: Section 21.7.5 Mechanical Strength |
|
IEC 60598-2-22 EN 60598-2-22 AS/NZS 60598.2.22 |
Luminaires Part 2-22: Particular requirements – Luminaires for emergency lighting |
|
IEC 60598-2-24 EN 60598-2-24 DIN EN 60598-2-24 |
Luminaires Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
|
IEC 60968 EN 60968 DIN EN 60968 GB16844 AS/NZS 60968 |
Self-ballasted lamps for general lighting services — Safety requirements |
|
IEC 60969 EN 60969 DIN EN 60969 AS/NZS 60969 |
Self-Ballasted Lamps for General Lighting Services – Performance Requirements |
|
IEC 61347-1 EN 61347-1 DIN EN 61347-1 GB 19510.1 AS/NZS 61347.1 |
Lamp controlgear Part 1: General and safety requirements |
|
IEC 61347-2-3 EN 61347-2-3 DIN EN 61347-2-3 GB 19510.4 AS/NZS 61347.2.3 |
Lamp controlgear Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps |
|
IEC 61347-2-7 EN 61347-2-7 GB 19510.8 |
Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting |
|
IEC 61347-2-11 EN 61347-2-11 DIN EN 61347-2-11 AS/NZS 61347.2.11 |
Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires |
|
IEC 61347-2-13 EN 61347-2-13 DIN EN 61347-2-13 GB 19510.14 AS/NZS 61347.2.13 |
Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules |
|
IEC 62031 EN 62031 DIN EN 62031 GB 24819 |
LED modules for general lighting — Safety specifications, Exception: Section 22 photobiological safety |
|
IEC 62560 EN 62560 DIN EN 62560 GB 24906 AS/NZS 62560 |
Self-ballasted LED-lamps for general lighting services by voltage > 50V — Safety specifications, Exception: Section 22 photobiological safety |
|
IEC 62612 EN 62612 DIN EN 62612 |
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements |
|
IEC 62717 EN 62717 DIN EN 62717 |
LED modules for general lighting - Performance requirements |
|
IEC 62722-2-1 EN 62722-2-1 DIN EN 62722-2-1 |
Luminaire performance - Part 2-1: Particular requirements for LED luminaires |
| Electrical Safety Testing – IT Equipment | |
|
IEC 60950-1 EN 60950-1 DIN EN 60950-1 |
Information technology equipment — Safety Part 1: General requirements, Exception: Annex H (Ionizing radiation) GB4943.1 |
| Electrical Safety Testing – Audio/Video/Other Home Electronics | |
|
IEC 60065 EN 60065 DIN EN 60065 GB 8898 |
Audio, video and similar electronic apparatus — Safety requirements |
| Electrical Safety Testing – Audio/Video/Information Technology Equipment | |
|
IEC 62368-1 EN 62368-1 AS/NZS 62368.1 |
Audio/video, information and communication technology equipment — Part 1: Safety requirements |
| Electrical Safety Testing – Components | |
|
IEC 61558-1 EN 61558-1 DIN EN 61558-1 GB 19212.1 |
Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests |
|
IEC 61558-2-6 EN 61558-2-6 DIN EN 61558-2-6 GB 19212.7 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
|
EC 61558-2-16 EN 61558-2-16 DIN EN 61558-2-16 GB 19212.17 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units |
| Electrical Safety Testing – Laboratory Equipment | |
|
IEC 61010-1 EN 61010-1 DIN EN 61010-1 GB 4793.1 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements, Exception: Sections 12.2.1 (Ionizing radiation), 12.3 (Ultraviolet (UV) radiation), 12.4 (Microwave radiation), 12.5.1 (Sound level), 12.5.2 (Ultrasonic pressure), 12.6 (Laser sources) |
| Electrical Safety Testing – EPAC | |
|
EN 15194 DIN EN 15194 |
Cycles — Electrically power assisted cycles EPAC Bicycles, Exception: Annex C and Section 4.2.5 (EMC) |
| Electrical Safety Testing – Toys | |
|
IEC 62115 DIN EN 62115 |
Electric toys — Safety EN 62115 |
| Environmental Testing | |
|
ISO 6270-2 EN ISO 6270-2 BS EN ISO 6270-2 DIN EN ISO 6270-2 |
Paints and varnishes —Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres |
|
IEC 60068-2-2 EN 60068-2-2 DIN EN 60068-2-2 |
Environmental testing Part 2-2: Tests — Test B: Dry heat |
|
IEC 60068-2-17 EN 60068-2-17 DIN EN 60068-2-17 |
Environmental testing Part 2-17: Tests — Test Q: Sealing |
|
IEC 60068-2-30 EN 60068-2-30 DIN EN 60068-2-30 |
Environmental testing Part 2-30: Tests — Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
|
IEC 60068-2-78 EN 60068-2-78 DIN EN 60068-2-78 |
Environmental testing Part 2-78: Tests — Test Cab: Damp heat, steady state |
|
IEC 60529 EN 60529 DIN EN 60529 |
Degrees of protection provided by enclosures (IP Code) |
| HSTS | |
|
IEC 62321-1 EN 62321-1 |
Determination of certain substances in electro-technical products Part 1: Introduction and Overview |
| Electrical Performance Testing | |
|
IEC 60311 EN 60311 DIN EN 60311 |
Electric irons for household or similar use — Methods for measuring performance |
|
IEC 60312-1 EN 60312-1 DIN EN 60312-1 |
Vacuum cleaners for household use Part 1: Dry vacuum cleaners — Methods for measuring the performance |
| IEC 60530 | Methods for Measuring Performance of Electric Kettles and Jugs for Household and Similar Use |
|
IEC 60531 EN 60531 DIN EN 60531 |
Household electric thermal storage room heaters — Methods for measuring performance |
|
IEC 60619 EN 60619 DIN EN 60619 |
Electrically operated food preparation appliances — Methods for measuring the Performance |
|
IEC 60661 EN 60661 DIN EN 60661 |
Methods for measuring the performance of electric household coffee makers |
|
IEC 60705 EN 60705 DIN EN 60705 |
Household microwave ovens — Methods for measuring performance |
| IEC 60879 | Specification for Performance and construction of electric circulating fans and regulators |
|
IEC 61309 EN 61309 DIN EN 61309 |
Deep-fat fryers for household use — Methods for measuring the performance |
|
IEC 61817 EN 61817 DIN EN 61817 |
Household portable appliances for cooking, grilling and similar use — Methods for Measuring performance |
| EN 62552 | Household refrigerating appliances-Characteristics and test methods |
| Electrical Efficiency and Performance | |
| AS/NZS 4665.1 | Performance and construction of electric circulating fans and regulators |
| AS/NZS 4665.2 | Performance of external power supplies Part2: Minimum energy performance standard (MEPS) requirements |
|
EN 50304 DIN EN 50304 |
Electric cooking ranges, hobs, ovens and grills for household use-Methods for measuring performance |
|
EN 50563 DIN EN 50563 |
External a.c. — d.c. and a.c.— a.c. power supplies – Determination of no-load power and average efficiency of active modes |
|
EN 50564 DIN EN 50564 IEC 62301 DIN EN 62301 |
Electrical and electronic household and office equipment — Measurement of low power consumption |
|
EN 60350 DIN EN 60350 |
Electric cooking ranges, hobs, ovens and grills for household use — Methods for measuring performance |
|
IEC 62087 EN 62087 |
Methods of measurement for the power consumption of audio, video and related equipment DIN EN 62087 |
| Technical Documentation | |
| ANSI Z535.6 | Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials |
|
IEC 82079-1 EN 82079-1 DIN EN 82079-1 BS EN 82079-1 VDE 0039-1 |
Preparation of instructions for use – Structuring, content and presentation. Part 1: General principles and detailed requirements Note: Household and similar electrical appliances, Tools, Furniture, Leisure and Fitness Equipment, Luminaires, IT Equipment, Audio/Video / Other Home Electronics, Laboratory Equipment, EPAC, Toys |
|
ISO 3864-1 BS ISO 3864-1 DIN ISO 3864-1 |
Graphical symbols – safety colors and safety signs Part 1: Design principles for safety signs and safety marking |
|
ISO 3864-2 DIN ISO 3864-2 |
Graphical symbols – safety colors and safety signs Part 2: Design principles for product safety labels |
| Mechanical Testing – Stationary training equipment | |
|
EN 957-2 BS EN 957-2 DIN EN 957-2 |
Stationary training equipment. Strength training equipment, additional specific safety requirements and test methods |
|
EN 957-4 BS EN 957-4 DIN EN 957-4 EN ISO 20957-4 ISO 20957-4 |
Stationary training equipment. Strength training benches, additional specific safety requirements and test methods |
|
EN 957-5 BS EN 957-5 DIN EN 957-5 EN ISO 20957-5 ISO 20957-5 |
Stationary training equipment. Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test, Exception: Pedal and Frame |
|
EN 957-6 BS EN 957-6 DIN EN 957-6 |
Stationary training equipment. Treadmills, additional specific safety requirements and test methods, Exception: Noise |
|
EN 957-7 BS EN 957-7 DIN EN 957-7 |
Stationary training equipment. Rowing machines, additional specific safety requirements and test |
|
EN 957-8 BS EN 957-8 DIN EN 957-8 |
Stationary training equipment. Steppers, stairclimbers and climbers. Additional specific safety requirements |
|
EN 957-9 BS EN 957-9 DIN EN 957-9 EN ISO 20957-9 ISO 20957-9 |
Stationary training equipment. Elliptical trainers, additional specific safety requirements and test methods |
|
EN 957-10 BS EN 957-10 DIN EN 957-10 |
Stationary training equipment. Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
| Mechanical Testing – Fitness equipment | |
| DIN 32935 | Home sports equipment; mobile tension and pression training equipment, safety requirements, testing |
| EK2/AK2.4 12-01:2012 | Test Principles for the safety of hiking, trekking and walking poles |
| Mechanical Testing – Household Products | |
|
EN 1183 DIN EN 957-10 BS EN 1183 DIN EN 1183 |
Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance |
| BS 1970 | Hot water bottles manufactured from rubber and PVC Specification |
|
EN 12546-1 BS EN 12546-1 DIN EN 12546-1 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 1: Specification for Vacuum Ware, Insulated Flasks and Jugs |
|
12546-2 BS EN 12546-2 DIN EN 12546-2 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 2: Specification for insulated bags and boxes |
|
EN 12546-3 BS EN 12546-3 DIN EN 12546-3 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 3: Specification for thermal packs |
|
EN 12875-2 BS EN 12875-2 DIN EN 12875-2 |
Mechanical dishwashing resistance of domestic utensils. Inspection of nonmetallic articles |
|
EN 12875-4 BS EN 12875-4 DIN EN 12875-4 |
Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles |
|
EN 12875-5 BS EN 12875-5 DIN EN 12875-5 |
Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles |
|
EN 12983-1 BS EN 12983-1 DIN EN 12983-1 |
Cookware – Domestic cookware for use on top of a stove, cooker or hob – Part 1: General requirements |
|
EN 13750 BS EN 13750 DIN EN 13750 |
Domestic water kettles for use on top of stove, cooker or hob Requirements and test methods |
|
EN 13834 BS EN 13834 DIN EN 13834 |
Cookware. Ovenware for use in traditional domestic ovens |
|
EN 15284 BS EN 15284 DIN EN 15284 |
Materials and articles in contact with food stuffs — Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware |
| Mechanical Testing – Furniture | |
| BS 6526 | Domestic oven gloves-Requirements and test methods |
| EK2 09.1 – 07 | Safety requirements for hammocks |
| EK5/AK3 15-03: 2016 | Hamok for domestic use |
|
EN 1022 BS EN 1022 DIN EN 1022 |
Domestic Furniture - Seating - Determination of Stability |
|
EN 1335-2 BS EN 1335-2 DIN EN 1335-2 |
Office furniture-Office work chair-Safety requirements |
|
EN 1725 BS EN 1725 DIN EN 1725 |
Domestic Furniture - Beds and Mattresses - Safety Requirements and Test Methods |
|
EN 1727 BS EN 1727 DIN EN 1727 |
Domestic furniture - Storage furniture - Safety requirements and test methods |
|
EN 1728 BS EN 1728 DIN EN 1728 |
Domestic furniture - Seating - Test methods for the determination of strength and durability |
|
EN 1730 BS EN 1730 DIN EN 1730 |
Domestic Furniture - Table -strength, stability and safety method |
|
EN 12520 BS EN 12520 DIN EN 12520 |
Furniture-Strength, durability and safety Requirements for domestic seating |
|
EN 12521 BS EN 12521 DIN EN 12521 |
Furniture - Strength, durability and safety - Requirements for domestic tables |
|
EN 12875-1 BS EN 12875-1 DIN EN 12875-1 |
Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles |
| EN 13561 | External blinds and awnings – performance requirements including safety |
|
EN 14183 BS EN 14183 DIN EN 14183 |
Step stools |
|
EN 14749 BS EN 14749 DIN EN 14749 NF EN 14749 |
Domestic and kitchen storage units and worktops – Safety requirements and test methods |
|
EN 16122 BS EN 16122 |
Domestic and non-domestic storage furniture. Test methods for the determination of strength, durability and stability |
|
EN 16139 BS EN 16139 |
Furniture. Strength, durability and safety. Requirements for non-domestic seating. |
| NF D60-300 -1 | Furniture for young children-Part 1: general safety requirements for furniture for young children |
| NF D60-300-2 | Furniture for young children - Part 2: safety requirements and test methods for indoor and outdoor seating |
| NF D60-300-3 | Furniture for young children - Part 3: safety requirements and test methods for indoor and outdoor tables |
| NF D60-300-4 | Children's furniture - For domestic use - Part 4: requirements and test methods for toddler beds |
| NF D61-062 | Outdoor furniture-Adjustable deck-chairs-General safety requirements- Mechanical tests and requirements |
| Mechanical Testing – Castors and wheels | |
|
EN 12532 BS EN 12532 DIN EN 12532 |
Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) |
|
EN 12533 BS EN 12533 DIN EN 12533 |
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) |
| Mechanical Testing – Barbecue appliances | |
|
EN 1860-1 BS EN 1860-1 DIN EN 1860-1 |
Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods |
|
EN 1860-4 BS EN 1860-4 DIN EN 1860-4 |
Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods |
| Mechanical Testing – Luggage | |
| EK5/TA2 11-01 | Test Principles for the Safety of Travel Luggage for Private Use |
| Mechanical Testing – Child care articles | |
|
EN 1888 BS EN 1888 DIN EN 1888 |
Child care articles. Wheeled child conveyances. Safety requirements and test methods |
| Mechanical Testing – Tools | |
| EK5/AK2 12-02 | Test Principles for the safety of Bolt and Wire Cutters |
| EK5/AK2 12-03 | Testing Principle for the Safety of Garden Shears |
| EK5/AK2 12-04 | Test principles for the safety of pipe wrenches |
| EK5/AK2 12-05 | Test Principles for the safety of One-hand Operated Hacksaws |
| EK5/AK2 16-03 | Testing Principle for the Safety of Small Garden Tools for Soil Cultivation |
| EK5/AK2 PA 80-10.2.4 | Testing Principles for the Safety of Telescopic Sticks for Garden Tools |
| EK5/AK7 13-01 | Test principles for the safety of brackets |
| EK5/AK8 13-05.01 | Test Principles for the Safety of Garden watering products |
| Chemical / Food Contact Material | |
|
84/500/EEC 2005/31/EC |
COUNCIL DIRECTIVE of 15 October 1984 on the approximation of the laws of the Member States relating to ceramic articles intended to come into contact with foodstuffs COMMISSION DIRECTIVE 2005/31/EC of 29 April 2005amending Council Directive 84/500/EEC as regards a declaration of compliance and performance criteria of the analytical method for ceramic articles intended to come into contact with foodstuffs Remark: Extractable Heavy Metals |
| BfR Recommendation IX | Colorants for Plastics and other Polymers Used in Commodities Note: Fastness of coloured polymer/ elastomer/ silicone |
| BfR Recommendation XV | Silicones |
| BfR Recommendation XXXVI | Paper and board for food contact |
| BfR Recommendation XXXVI/1 | Cooking Papers, Hot Filter Papers and Filter Layers BfR Recommendation XXXVI/2, Paper and Paperboard for Baking Purposes |
| BfR Recommendation XXXVI/3 | Absorber pads based on cellulosic fibres for food packaging |
| Commission Regulation (EU) No 10/2011 |
Commission Regulation (EU) No 10/2011of 14 January 2011 on plastic materials and articles intended to come into contact with food Remark: Extractable Heavy Metals, Total Phthalates (5P) |
| Commission Directive 93/11/EEC | Provision related to the release of the N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers |
| Commission Regulation (EU) No 284/2011 | Specific conditions and detailed procedures for the import of polyamide and melamine plastic kitchenware originating in or consigned from the People’s Republic of China and Hong Kong Special Administrative Region, China |
| Commission Regulation (EC) No 1895/2005 | Restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food |
| CPSC-CH-C1001-09.4 |
Standard Operating Procedure for Determination of Phthalates (HH-SOP- 1018) Note: Phthalates/ Diisobutyl Phthalates (DIBP) / Dibutyl Phthalate (DBP) / Benzyl Butyl phthalate (BBP) / Di(2-ethylhexyl) phthalate (DEHP) / Diisononyl phthalate (DINP) / Di-n-pentyl phthalate (DPENP)/ Di-n-hexyl phthalate (DHEXP)/ Dicyclohexyl phthalate (DCHP) |
|
EN 645 BS EN 645 DIN EN 645 |
Paper and board intended to come into contact with foodstuffs— Preparation of a cold water extract Remark: Extractable Heavy Metals |
|
EN 646 BS EN 646 DIN EN 646 |
Paper and board intended to come into contact with foodstuffs – Determination of colour fastness of dyed paper and board |
|
EN 647 BS EN 647 DIN EN 647 |
Paper and board intended to come into contact with foodstuffs—Preparation of a hot water extract Remark: Extractable Heavy Metals |
|
EN 648 BS EN 648 DIN EN 648 |
Paper and board intended to come into contact with foodstuffs –Determination of the fastness of fluorescent whitened paper and board |
|
EN 1186-1 BS EN 1186-1 DIN EN 1186-1 |
Materials and articles in contact with foodstuffs — Plastics (as required by: 1. Commission Regulation (EC) No 1895/2005 Restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food, 2. Regulation (EG) No. 1935/2004 of the European Parliament and of the council) Remark: Overall Migration |
|
EN 1230-1 BS EN 1230-1 DIN EN 1230-1 |
Paper and board intended to come into contact with foodstuffs-Sensory analysis Remark: Sensory |
|
EN 1230-2 BS EN 1230-2 DIN EN 1230-2 |
Paper and board intended to come into contact with foodstuffs-Sensory analysis Remark: Sensory |
|
EN 1388-1 BS EN 1388-1 DIN EN 1388-1 |
Materials and articles in contact with foodstuffs —Silicate surfaces Remark: Extractable Heavy Metals |
|
EN 1541 BS EN 1541 DIN EN 1541 |
Paper and board intended to come into contact with foodstuffs—Determination of formaldehyde in an aqueous extract |
|
ISO 6401 EN ISO 6401 BS EN ISO 6401 DIN EN ISO 6401 |
Plastics — Poly(vinyl chloride) —Determination of residual vinyl chloride monomer — Gas chromatographic method |
| DIN 10955 | Sensory analysis –Testing of packaging materials and packages for food products (as required by Regulation (EG) No. 1935/2004 of the European Parliament and of the council) Remark: Sensory |
|
EN 12868 BS EN 12868 DIN EN 12868 |
Child use and care articles —Method for determining the release of Nnitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers (as required by Commission Directive 93/11/EEC Provision related to the release of the N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers) |
|
EN 13130-1 BS EN 13130-1 DIN EN 13130-1 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants Remark: Extractable Heavy Metals (as required by: 1. Commission Regulation (EU) No 10/2011of 14 January 2011 on plastic materials and articles intended to come into contact with food, 2. Commission Regulation (EU) No 284/2011 Specific conditions and detailed procedures for the import of polyamide and melamine plastic kitchenware originating in or consigned from the People’s Republic of China and Hong Kong Special Administrative Region, China, 3. Commission Regulation (EC) No 1895/2005 Restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food) |
|
EN 13130-2 BS EN 13130-2 DIN EN 13130-2 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 2: Determination of terephthalic acid in food simulants |
|
EN 13130-4 BS EN 13130-4 DIN EN 13130-4 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 4: Determination of 1,3-butadiene in plastics |
|
EN 13130-9 BS EN 13130-9 DIN EN 13130-9 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 9: Determination of acetic acid, vinyl ester in food simulants |
|
EN 13130-13 BS EN 13130-13 DIN EN 13130-13 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Determination of 2,2-bis (4-hydroxyphenyl) propane (Bisphenol A) in food simulants. Specific migration of 2,2-bis (4-hydroxyphenyl) propane (Bisphenol A) and Total content of 2,2-bis (4-hydroxyphenyl) propane (Bisphenol A) |
|
EN 13130-16 BS EN 13130-16 DIN EN 13130-16 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 16: Determination of caprolactam and caprolactam salt in food simulants |
|
EN 13130-21 BS EN 13130-21 DIN EN 13130-21 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 21: Determination of ethylenediamine and hexamethylenediamine in food simulants |
|
EN 13130-27 BS EN 13130-27 DIN EN 13130-27 |
Materials and articles in contact with foodstuffs –Plastics substances subject to limitation – Part 27: Determination of 2,4,6-triamino-1,3,5-triazine in food simulants |
|
ISO 13365 EN ISO 13365 BS EN ISO 13365 |
Leather - Chemical tests - Determination of the preservative (TCMTB, PCMC, OPP, OIT, Triclosan) content in leather by liquid chromatography DIN EN ISO 13365 |
|
ISO 14389 EN ISO 14389 BS EN ISO 14389 |
Textiles - Determination of the phthalate content – Tetrahydrofuran method |
|
ISO 17072-1 EN ISO 17072-1 DIN EN ISO 17072-1 BS EN ISO 17072-1 |
Leather - Chemical determination of metal content Part 1: Extractable metals |
| EUR 24815 EN 2011 | Technical guidelines on testing the migration of primary aromatic amines from polyamide kitchenware and of formaldehyde from melamine kitchenware |
| DIN 51032 |
Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs Remark: Extractable Cobalt |
| DIN 54233-1 | Testing of textiles - Determination of metals - Part 1: Determination of metals using microwave digestion |
| EPA 6010D | Inductively Coupled Plasma-Optical Emission Spectrometry |
| EPA 6020B | Inductively Coupled Plasma-Mass Spectrometry |
| Guideline metals and alloys 2013 1st Edition |
Technical Guide on Metals and Alloys used in food contact materials and articles Remark: Extractable Heavy Metals |
| HH-OP-7001 | REWE Requirement on storage box / basket made of plastic with food contact |
| HH-SOP-0090 | Colorants for Plastics and other Polymers Used in Commodities. Note: Fastness of coloured polymer/ elastomer/ silicone |
| HH-SOP-1009 |
Determination of volatile organic compound (VOC) in samples by Headspace – Gas Chromatography Mass Detector (HS-GC-MSD) method Note: Only Formaide as VOCs in plastics |
| LFGB§31 |
German Food and Feed Code (Foodstuffs and Animal Feed Code – LFGB) § 31 transfer of substances to food Remark: Sensory |
| Regulation (EC) No 1907/2006 |
Regulation (EC) No 1907/2006 of the European Parliament and of the council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a Europea Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC Remark: Total Cadmium Content |
| Regulation (EG) No. 1935/2004 | Regulation (EC) No. 1935/2004 of the European Parliament and of the council Remark: Sensory, Overall Migration |
| Statutory order No. 1082 | Statutory Order on prohibiting the import and sale of products containing lead Remark: Total Lead Content |
| Chemical / Textiles | |
| AATCC 81 | pH of the Water-Extract from Wet Processed Textiles Note: pH Value |
| CR 12471 |
Screening test for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin Note: Nickel Release |
|
EN 420 BS EN 420 DIN EN 420 |
Protective gloves - General requirements and test methods Note: Chromium VI |
|
BS EN 717-3 EN 717-3 DIN EN 717-3 |
Wood-based panels-Determination of formaldehyde release Part 3: Formaldehyde release by the flask method |
|
EN 1122 DIN EN 1122 BS EN 1122 |
Plastics - Determination of cadmium - Wet decomposition method Note: Method B, Total cadmium |
|
EN 1811 BS EN 1811 DIN EN 1811 |
Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin Note: Nickel Release |
|
ISO 3071 EN ISO 3071 BS EN ISO 3071 DIN EN ISO 3071 |
Textiles - Determination of pH of aqueous extract Note: pH Value |
|
ISO 4045 EN ISO 4045 BS EN ISO 4045 DIN EN ISO 4045 |
Leather - Chemical tests - Determination of pH Note: pH Value |
|
EN 12472 BS EN 12472 DIN EN 12472 |
Method for the simulation of wear and corrosion for the detection of nickel release from coated items Note: Nickel Release |
|
ISO 14184-1 EN ISO 14184-1 BS EN ISO 14184-1 DIN EN ISO 14184-1 |
Textiles - Determination of formaldehyde Part 1: Free and hydrolysed formaldehyde (water extraction method) Note: Free Formaldehyde |
|
EN 14362-1 BS EN 14362-1 DIN EN 14362-1 |
Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres Note: Azo Dyes: o-anisidine / 4-aminobiphenyl / benzidine / 4-chloro- o-toluidine / 2-naphthylamine / o-aminoazotoluene / 2-amino-4- nitrotoluene (5-nitro-otoluidine) / p-chloraniline (4-chloroaniline) / 4- methoxy-m-phenylenediamine (2,4-diaminoanisole) / 4,4´-diamino diphenyl methane (4,4´-Methylenedianiline) / 3,3´-dichlorobenzidine / 3,3´-dimethoxybenzidine / 3,3´-dimethylbenzidine / 3,3´-dimethyl- 4,4´-diaminodiphenylmethane / 4,4´-methylene-bis-(2chloraniline) / 4,4´-oxydianiline / 4,4´-thiodianiline / o-toluidine / 4-methyl-1,3- phenylendiamine (2,4-toluylendiamine) / 2,4,5-trimethylaniLine / p- aminoazobenzene (4-aminoazobenzol) / 2-methoxy-5-methylaniline (pcresidine) / aniline / 2,4-xylidine / 2,6-xylidine |
|
EN 14362-3 BS EN 14362-3 DIN EN 14362-3 |
Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene Note: Azo Dyes: o-anisidine / 4-aminobiphenyl / benzidine / 4-chloro- o-toluidine / 2-naphthylamine / o-aminoazotoluene / 2-amino-4- nitrotoluene (5-nitro-otoluidine) / p-chloraniline (4-chloroaniline) / 4- methoxy-m-phenylenediamine (2,4-diaminoanisole) / 4,4´-diamino diphenyl methane (4,4´-Methylenedianiline) / 3,3´-dichlorobenzidine / 3,3´-dimethoxybenzidine / 3,3´-dimethylbenzidine / 3,3´-dimethyl- 4,4´-diaminodiphenylmethane / 4,4´-methylene-bis-(2chloraniline) / 4,4´-oxydianiline / 4,4´-thiodianiline / o-toluidine / 4-methyl-1,3- phenylendiamine (2,4-toluylendiamine) / 2,4,5-trimethylaniLine / p- aminoazobenzene (4-aminoazobenzol) / 2-methoxy-5-methylaniline (pcresidine) / aniline / 2,4-xylidine / 2,6-xylidine |
|
ISO/TS 16186 CEN ISO/TS 16186 DIN CEN ISO/TS 16186 |
Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylfumarate (DMFU) in footwear materials Note: Dimethyl fumarate (DMFU) |
|
ISO 17070 EN ISO 17070 BS EN ISO 17070 DIN EN ISO 17070 |
Leather - Chemical tests - Determination of pentachlorophenol content Note: Determination of chlorinated phenol 2-Chlorophenol / 3-Chlorophenol / 4- Chlorophenol / 2,3-Dichlorophenol / 2,4-Dichlorophenol / 2,5-Dichlorophenol / 2,6-Dichlorophenol / 3,4-Dichlorophenol / 3,5-Dichlorophenol / 2,3,4- Trichlorphenol / 2,3,5- Trichlorphenol / 2,4,5-Trichlorphenol / 2,4,6- Trichlorphenol / 3,4,5- Trichlorphenol / 2,3,4-Trichlorphenol / 2,3,4,5Tetrachlorphenol /2,3,4,6-Tetrachlorphenol / 2,3,5,6-Tetrachlorphenol / pentachlorophenol / O‑phenylphenol (OPP) |
|
ISO 17072-1 EN ISO 17072-1 DIN EN ISO 17072-1 BS EN ISO 17072-1 |
Leather - Chemical determination of metal content Part 1: Extractable metals |
|
ISO 17075 EN ISO 17075 BS EN ISO 17075 DIN EN ISO 17075 |
Leather - Chemical tests - Determination of chromium (VI) content Note: Chromium VI |
|
ISO 17226-2 EN ISO 17226-2 BS EN ISO 17226-2 DIN EN ISO 17226-2 |
Leather - Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis Note: Free Formaldehyde |
|
ISO/DIS 18219 prEN ISO 18219 DIN EN ISO 18219 |
Leather - Determination of chlorinated hydrocarbons in leather– Chromatographic method for short-chain chlorinated paraffins (SCCP) Note: short-chain chlorinated paraffins (SCCP) |
| DIN 54231 |
Textiles - Detection of disperse dyestuffs Note: Disperse Blue 1 / Disperse Blue 3 / Disperse Blue 7 / Disperse Blue 26 / Disperse Blue 35 / Disperse Blue 102 / Disperse Blue 106 / Disperse Blue 124 / Disperse Yellow 1 / Disperse Yellow 3 / Disperse Yellow 9 / Disperse Yellow 39 / Disperse Brown 1 / Disperse Yellow 49 / Disperse Yellow 23 / Disperse Orange 149 / Basic Red 9 / Basic Violet 14 / Disperse Orange 11 / Direct Blue 6 / Direct Red 28 / Direct Black 38 / Acid Red 26 / Disperse Orange 1 / Disperse Orange 3 / Disperse Orange 37 / Disperse Red 1 / Disperse Red 11 / Disperse Red 17 |
| DIN 54232 |
Textiles - Determination of the content of bonds based on chlorobenzene and chlorotoluene Note: Chlorinated Organic Carrier 2-chlorotoluene / 3-chlorotoluene / 4- chlorotoluene / 2,3-Dichlorotoluene / 2,4-Dichlorotoluene / 2,5- Dichlorotoluene / 2,6-Dichlorotoluene / 3,4-Dichlorotoluene / 2,3,6- Trichlorotoluene / 2,4,5- Trichlorotoluene / Pentachlorotoluene / 1,2- Dichlorobenzene / 1,3Dichlorobenzene / 1,4-Dichlorobenzene / 1,2,3- Trichlorobenzene / 1,2,4- Trichlorobenzene / 1,3,5-Trichlorobenzene / 1,2,3,4-Tetrachlorobenzene / 1,2,3,5-Tetrachlorobenzene / 1,2,4,5- Tetrachlorobenzene / Pentachlorobenzene / Hexachlorobenzene |
| DIN 54233-3 | Testing of textiles - Determination of metals - Part 3: Determination of metals extracting by acid synthetic perspiration solution |
| SNV 195651 | Textiles – Determination of the odor development in equipment |
| Chemical / Leather | |
|
ISO/TS 16189 DIN CEN ISO/TS 16189 PD CEN ISO/TS 16189 |
Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials |
|
ISO 17226-1 EN ISO 17226-1 DIN EN ISO 17226-1 BS EN ISO 17226-1 |
Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography |
|
ISO 17234-1 EN ISO 17234-1 BS EN ISO 17234-1 DIN EN ISO 17234-1 |
Leather - Chemical tests for the determination of certain azo colorants in dyed leather - Part 1: Determination of certain aromatic amines derived from azo colorants Note: Azo Dyes: o-anisidine / 4-aminobiphenyl / benzidine / 4-chloro-o-toluidine / 2-naphthylamine / o-aminoazotoluene / 2-amino-4- nitrotoluene (5-nitro-otoluidine) / p-chloraniline (4-chloroaniline) / 4- methoxy-m-phenylenediamine (2,4-diaminoanisole) / 4,4´-diamino diphenyl methane (4,4´-Methylenedianiline) / 3,3´-dichlorobenzidine / 3,3´-dimethoxybenzidine / 3,3´-dimethylbenzidine / 3,3´-dimethyl- 4,4´-diaminodiphenylmethane / 4,4´-methylene-bis-(2chloraniline) / 4,4´-oxydianiline / 4,4´-thiodianiline / o-toluidine / 4-methyl-1,3- phenylendiamine (2,4-toluylendiamine) / 2,4,5-trimethylaniLine / p- aminoazobenzene (4-aminoazobenzol) / 2-methoxy-5-methylaniline (pcresidine) / aniline / 2,4-xylidine / 2,6-xylidine |
|
ISO 17234-2 EN ISO 17234-2 BS EN ISO 17234-2 DIN EN ISO 17234-2 |
Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2: Determination of 4-aminoazobenzene Note: Azo Dyes: o-anisidine / 4-aminobiphenyl / benzidine / 4-chloro-o-toluidine / 2-naphthylamine / o-aminoazotoluene / 2-amino-4-nitrotoluene (5-nitro-otoluidine) / p-chloraniline (4-chloroaniline) / 4- methoxy-m-phenylenediamine (2,4-diaminoanisole) / 4,4´-diamino diphenyl methane (4,4´-Methylenedianiline) / 3,3´-dichlorobenzidine / 3,3´-dimethoxybenzidine / 3,3´-dimethylbenzidine / 3,3´-dimethyl- 4,4´-diaminodiphenylmethane / 4,4´-methylene-bis-(2chloraniline) / 4,4´-oxydianiline / 4,4´-thiodianiline / o-toluidine / 4-methyl-1,3- phenylendiamine (2,4-toluylendiamine) / 2,4,5-trimethylaniLine / p- aminoazobenzene (4-aminoazobenzol) / 2-methoxy-5-methylaniline (pcresidine) / aniline / 2,4-xylidine / 2,6-xylidine |
|
ISO/DIS 18218-1 prEN ISO 18218-1 DIN EN ISO 18218-1 BS EN ISO 18218-1 |
Leather - Chemical determination of ethoxylated alkylphenols Part 1: Direct method |
| Chemical / Textiles, Commodity | |
| AfPS GS 2014:01 PAK |
Testing and Validation of Polycyclic Aromatic Hydrocarbons (PAH) in the course of GS-Mark Certification Note: PAHs (polynuclear aromatic hydrocarbons) |
| CPSC-CH-C1001-09.3 |
Standard Operating Procedure for Determination of Phthalates Note: Phthalates: Phthalic acid,bis-methyl ester (DMP) / Phthalic acid,bis-ethyl ester (DEP) / Diisobutyl Phthalates (DIBP) / Dibutyl Phthalate (DBP) / Diisopentylphthalat (DIPP) / n-Pentyl-isopentyl phthalate (PIPP) / Di-nhexylphthalate (DHP) / Butyl Benzyl Phthalate (BBP) / Di-(2-methoxyethyl)phthalate (DMEP) / Bis(2-ethylhexyl) Phthalate (DEHP) / Di-n-octyl Phthalate (DNOP) / Diiso nonyl Phthalate (DINP) / Diisodecyl Phthalate (DIDP) / Di-npenty Phthalate (DPP) |
|
EN 71-9 BS EN 71-9 |
Safety of toys - Part 9: Organic chemical compounds – Requirements Note: (2C) Primary aromatic amines DIN EN 71-9 |
|
EN 71-10 BS EN 71-10 DIN EN 71-10 |
Safety of toys - Part 10: Organic chemical compounds – Sample preparation and extraction Note: (2C) Primary aromatic amines |
|
EN 71-11 BS EN 71-11 DIN EN 71-11 |
Safety of toys - Part 11: Organic chemical compounds – Methods of analysisRestriction: No methods for wood preservatives and solvent inhalation Note: (2C) Primary aromatic amines |
|
ISO 105-E04 EN ISO 105-E04 BS EN ISO 105-E04 DIN EN ISO 105-E04 |
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration Note: Metal migration, Extractable Heavy Metals: OEKO-TEX 100: Sb / As / Pb / Cd / Cr / Co / Cu / Ni / Hg / Cr VI / Se / Sn / Zn |
|
ISO 14389 EN ISO 14389 BS EN ISO 14389 |
Textiles - Determination of the phthalate content – Tetrahydrofuran method |
|
ISO/TS 16179 CEN ISO/TS 16179 DIN CEN ISO/TS 16179 |
Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials Note: Organotin Compounds: Di-n-butyltin Dichloride (DBT)/Tri-n- butyltin Chloride(TBT)/Triphenyltin Chloride(TPhT)/Di-n-octyltin Dichloride(DOT)/ nbutyltin Trichloride(MBT)/n-octyltin Trichloride(MOT)/Tricyclohexyltin Chloride(TcyT)/Tetra-n- butyltin(TTBT) |
|
ISO 17353 EN ISO 17353 BS EN ISO 17353 DIN EN ISO 17353 |
Water quality - Determination of selected organotin compounds - Gas chromatographic method Note: Organotin Compounds: Di-n-butyltin Dichloride (DBT) / Tri-n-butyltin Chloride(TBT) / Triphenyltin Chloride(TPhT) / Di-n-octyltin Dichloride(DOT) / nbutyltin Trichloride(MBT) / n-octyltin Trichloride(MOT) / Tricyclohexyltin Chloride(TcyT) / Tetra-n- butyltin(TTBT) |
| DIN 54233-1 | Testing of textiles - Determination of metals - Part 1: Determination of metals using microwave digestion |
| EPA 3050B | Acid Digestion of Sediments, Sludges, and Soils Note: Total Lead, Total cadmium |
| EPA 3052 |
Microwave Assisted Acid Digestion of Siliceous and Organically Based Matrices Note: Total Lead, Total cadmium, Boron (as required by Regulation (EC) No 1907/2006 of the European Parliament and of the council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a Europea Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC) |
| ZEK 01.4-08 |
Testing and Validation of Polycyclic Aromatic Hydrocarbons (PAH) in the course of GS-Mark Certification Note: PAHs (polynuclear aromatic hydrocarbons) |
| Chemical / Commodity | |
| 16 CFR Part 1303 |
Ban of Lead-Containing Paint and Certain Consumer Products Bearing LeadContaining Paint Note: Total Lead |
| ASTM E1645 |
Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis Note: Total Lead |
|
ASTM F963-16, Clause 4.3.5.1 |
Standard Consumer Safety Specification for Toy Safety – Surface Coating Materials – Soluble Test for Metals |
|
ASTM F963-16 Clause 4.3.5.2 |
Standard Consumer Safety Specification for Toy Safety - Toy Substrate Materials |
|
ASTM F963-16, Clause 4.3.6.3 |
Standard Consumer Safety Specification for Toy Safety - Cleanliness of Liquids, Pastes, Putties, Gels, and Powders (except for cosmetics and tests on formulations used to prevent microbial degradation) |
|
ASTM F963-16, Clause 4.3.7 |
Stuffing Materials |
|
ASTM F963-16, Section 8.3 |
Standard Consumer Safety Specification for Toy Safety - Test Methods for Determination of Heavy Element Content in Toys, Toy Components and Materials Note: Sb / As / Cd / Cr / Ba / Hg / Pb / Sn / Al / B / Co / Cu / Mg / Ni / Se / Sr / Zn |
| CPSC-CH-E1001-08.1 |
Standard Operating Procedure for Determining Total Lead (Pb) in Metal Children’s Products (including Children’s Metal Jewelry) Note: Total Lead |
| CPSC-CH-E1001-08.3 | Standard Operating Procedure for Determining Total Lead (Pb) in Children’s Metal Products |
| CPSC-CH-E1002-08.1 |
Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Children’s Products Note: Total Lead |
| CPSC-CH-E1002-08.3 | Standard Operating Procedure for Determining Total Lead (Pb) in Nonmetal Children’s Products |
| CPSC-CH-E1003-09.1 |
Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings Note: Total Lead |
| EPA 3060A | Alkaline Digestion for Hexavalent Chromium Note: Chromium VI |
| EPA 8081B |
Textiles - Determination of the content of bonds based on chlorobenzene and chlorotoluene (Chlorinated Organic Carrier) Note: Chlorinated Organic Carrier: 2-chlorotoluene / 3-chlorotoluene / 4- chlorotoluene / 2,3-Dichlorotoluene / 2,4-Dichlorotoluene / 2,5-Dichlorotoluene / 2,6-Dichlorotoluene / 3,4-Dichlorotoluene / 2,3,6- Trichlorotoluene / 2,4,5- Trichlorotoluene / Pentachlorotoluene / 1,2- Dichlorobenzene / 1,3Dichlorobenzene / 1,4-Dichlorobenzene / 1,2,3- Trichlorobenzene / 1,2,4- Trichlorobenzene / 1,3,5-Trichlorobenzene / 1,2,3,4-Tetrachlorobenzene / 1,2,3,5-Tetrachlorobenzene / 1,2,4,5- Tetrachlorobenzene / Pentachlorobenzene / Hexachlorobenzene |
|
ISO 3613 EN ISO 3613 BS EN ISO 3613 DIN EN ISO 3613 |
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminum-zinc alloys and zinc-aluminum alloys – Test methods Note: Chromium VI |
|
IEC 62321 EN 62321 DIN EN 62321 VDE 0042-1 |
Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) Note: Total Lead, Total cadmium, Chromium VI, Mercury |
| Physical/Leather | |
|
ISO 11640 EN ISO 11640 BS EN ISO 11640 DIN EN ISO 11640 |
Leather – Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing |
|
ISO 11641 EN ISO 11641 BS EN ISO 11641 DIN EN ISO 11641 |
Leather – Tests for colour fastness - Colour fastness to perspiration |
|
ISO 11642 EN ISO 11642 BS EN ISO 11642 DIN EN ISO 11642 |
Leather – Tests for colour fastness - Colour fastness to water |
| Physical/Textile | |
| 16CFR 1500.48 | Technical requirements for determining a sharp point in toys and other articles intended for use by children under 8 years of age |
| 16CFR 1500.49 | Technical requirements for determining a sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age |
| 16CFR 1500.50 | Test methods for simulating use and abuse of toys and other articles intended for use by children |
| 16CFR 1500.51 | Test methods for simulating use and abuse of toys and other articles intended for use by children 18 months of age or less |
| 16CFR 1500.52 | Test methods for simulating use and abuse of toys and other articles intended for use by children over 18 but not over 36 months of age |
| 16CFR 1500.53 | Test methods for simulating use and abuse of toys and other articles intended for use by children over 36 but not over 96 months of age |
| 16CFR 1501 | Method for Identifying Toys and other Articles Intended for use by Children under 3 Years of Age Which Present Choking, Aspiration, or Ingestion Hazards Because of Small Parts |
| 16CFR 1610 | Standard for the Flammability of Clothing Textiles |
| 16CFR 1615 | Standard for the Flammability of Children’s Sleepware: Sizes 0 Through 6X (FF 3-71) |
| 16CFR 1616 | Standard for the Flammability of Children’s Sleepware: Sizes 7 Through 14 (FF5-74) |
| AATCC 8 | Colorfastness to Crocking: Crockmeter Method |
| AATCC 15 | Colorfastness to Perspiration |
| AATCC 20 | Fiber Analysis: Qualitative |
| AATCC 20A | Fiber Analysis: Quantitative |
| AATCC 22 | Water Repellency: Spray Test |
| AATCC 61 | Colorfastness to Laundering: Accelerated |
| AATCC 88B | Smoothness of Seams in Fabrics after Repeated Home Laundering |
| AATCC 88C | Retention of Creases in Fabrics after Repeated Home Laundering |
| AATCC 106 | Colorfastness to Water: Sea |
| AATCC 107 | Colorfastness to Water |
| AATCC 116 | Colorfastness to Crocking: Rotary Vertical Crockmeter Method |
| AATCC 124 | Smoothness Appearance of Fabrics after Repeated Home Laundering |
| AATCC 132 | Colorfastness to Drycleaning |
| AATCC 135 | Dimensional Changes of Fabrics after Home Laundering |
| AATCC 143 | Appearance of Apparel and Other Textile End Products after Repeated Home Laundering |
| AATCC 150 | Dimensional Changes of Garments after Home Laundering |
| AATCC 163 | Colorfastness: Dye Transfer in Storage; Fabric-to-Fabric |
| AATCC 172 | Colorfastness to Powdered Non-Chlorine Bleach in Home Laundering |
| AATCC 179 | Skewness Change in Fabric and Garment Twist Resulting from Automatic Home Laundering |
| AATCC 188 | Colorfastness to Sodium Hypochlorite Bleach in Home Laundering |
| AS 2001.2.3.2 | Physical tests—Determination of maximum force using the grab method |
| AS 2001.2.4 | Physical tests—Determination of bursting pressure of textile fabrics— Hydraulic diaphragm method |
| AS 2001.2.8 | Physical tests—Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf) |
| AS 2001.2.13 | Determination of Mass Per Unit Area and Mass Per Unit Length of Fabrics |
| AS 2001.2.16 | Determination of water repellency of textile surfaces—spray rating test |
| AS 2001.2.20 | Physical tests—Determination of seam breaking force |
| AS 2001.2.21 | Physical tests—Determination of seam opening due to the application of force in the transverse direction |
| AS 2001.2.22 | Physical tests—Determination of yarn slippage in woven fabric at a standard stitched seam |
| AS 2001.2.25.1 | Physical tests—Determination of the abrasion resistance of fabrics by the Martindale method — Martindale abrasion testing apparatus |
| AS 2001.2.25.2 | Physical tests — Determination of the abrasion resistance of fabrics by the Martindale method — Determination of specimen breakdown |
| AS 2001.2.25.3 | Physical tests — Determination of the abrasion resistance of fabrics by the Martindale method — Determination of mass loss |
| AS 2001.2.25.4 | Physical tests — Determination of the abrasion resistance of fabrics by the Martindale method — Assessment of appearance change |
| AS 2001.4.3 | Colourfastness tests — Determination of colourfastness to rubbing |
| AS 2001.4.5 | Colourfastness tests — Determination of colourfastness to chlorinated swimming pool water |
| AS 2001.4.15 | Colourfastness tests — Determination of colourfastness to washing |
| AS 2001.4.16 | Determination of colourfastness to drycleaning solvents |
| AS 2001.4.B02 | Colourfastness test — Colourfastness to artificial light: Xenon arc fading lamp test |
| AS 2001.4.E01 | Colourfastness tests — Colourfastness to water |
| AS 2001.4.E02 | Colourfastness tests — Colourfastness to sea water |
| AS 2001.4.E04 | Colourfastness tests — Determination of colourfastness to perspiration |
| AS 2001.5.4 | Dimensional change — Domestic washing and drying procedures for textile testing |
| AS 2001.7 | Quantitative analysis of fibre mixtures |
| AS 2332 | Slide fasteners (Except Reciprocating Test) |
| ASTM D434 | Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam |
| ASTM D1230 | Standard Test Method for Flammability of Apparel Textiles |
| ASTM D1424 | Standard Test Method for Tearing Strength of Fabrics by Falling- Pendulum (Elmendorf-Type) Apparatus |
| ASTM D1683 | Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics |
| ASTM D3776 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D3786 | Standard Test Method for Bursting Strength of Textile Fabrics — Diaphragm Bursting Strength Tester Method |
| ASTM D4846 | Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D4966 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) |
| ASTM D4970 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester |
| ASTM D5034 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D5035 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
|
ASTM F963-16, Section 4.6 |
Standard Consumer Safety Specification for Toy Safety Small Objects |
|
ASTM F963-16, Section 4.7 |
Standard Consumer Safety Specification for Toy Safety Accessible Edges |
|
ASTM F963-16, Section 4.9 |
Standard Consumer Safety Specification for Toy Safety Accessible Points |
|
ISO 105 B02 EN ISO 105 B02 BS EN ISO 105 B02 DIN EN ISO 105 B02 |
Textiles — Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
|
ISO 105 C06 EN ISO 105 C06 BS EN ISO 105 C06 DIN EN ISO 105 C06 |
Textiles — Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering |
|
ISO 105 C08 EN ISO 105 C08 BS EN ISO 105 C08 DIN EN ISO 105 C08 |
Textiles — Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
|
ISO 105 C09 EN ISO 105 C09 BS EN ISO 105 C09 DIN EN ISO 105 C09 |
Textiles — Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
|
ISO 105 C10 EN ISO 105 C10 BS EN ISO 105 C10 DIN EN ISO 105 C10 |
Textiles — Tests for colour fastness — Part C10: Colour fastness to washing with soap or soap and soda |
|
ISO 105 D01 EN ISO 105 D01 BS EN ISO 105 D01 DIN EN ISO 105 D01 |
Textiles — Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent |
|
ISO 105 E01 EN ISO 105 E01 BS EN ISO 105 E01 DIN EN ISO 105 E01 |
Textiles — Tests for colour fastness - Part E01: Colour fastness to water |
|
ISO 105 E02 EN ISO 105 E02 BS EN ISO 105 E02 DIN EN ISO 105 E02 |
Textiles — Tests for colour fastness - Part E02: Colour fastness to sea water |
|
ISO 105 E03 EN ISO 105 E03 BS EN ISO 105 E03 DIN EN ISO 105 E03 |
Textiles — Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) |
|
ISO 105 E04 EN ISO 105 E04 BS EN ISO 105 E04 DIN EN ISO 105 E04 |
Textiles — Tests for colour fastness - Part E04: Colour fastness to perspiration |
|
ISO 105 X12 EN ISO 105 X12 BS EN ISO 105 X12 DIN EN ISO 105 X12 |
Textiles - Tests for colour fastness – Part X12: Color fastness to rubbing |
|
ISO 105 X16 EN ISO 105 X16 BS EN ISO 105 X16 DIN EN ISO 105 X16 |
Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areas |
|
ISO 105 X18 EN ISO 105 X18 BS EN ISO 105 X18 DIN EN ISO 105 X18 |
Textiles — Tests for colour fastness — Part X18: Assessment of the potential to phenolic yellowing of materials |
|
ISO 1833-1 EN ISO 1833-1 BS EN ISO 1833-1 DIN EN ISO 1833-1 |
Textiles — Quantitative chemical analysis — Part 1: General principles of testing |
|
ISO 1833-2 EN ISO 1833-2 BS EN ISO 1833-2 DIN EN ISO 1833-2 |
Textiles — Quantitative chemical analysis — Part 2: Ternary fibre mixtures |
|
ISO 1833-3 EN ISO 1833-3 BS EN ISO 1833-3 DIN EN ISO 1833-3 |
Textiles — Quantitative chemical analysis — Part 3: Mixtures of acetate and certain other fibres (method using acetone) |
|
ISO 1833-4 EN ISO 1833-4 BS EN ISO 1833-4 DIN EN ISO 1833-4 |
Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein and certain other fibres |
|
ISO 1833-7 EN ISO 1833-7 BS EN ISO 1833-7 DIN EN ISO 1833-7 |
Textiles — Quantitative chemical analysis — Part 7: Mixtures of polyamide and certain other fibres |
|
ISO 1833-11 EN ISO 1833-11 BS EN ISO 1833-11 DIN EN ISO 1833-11 |
Textiles — Quantitative chemical analysis — Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) |
|
ISO 1833-12 EN ISO 1833-12 BS EN ISO 1833-12 DIN EN ISO 1833-12 |
Textiles — Quantitative chemical analysis — Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) |
|
ISO 1833-18 EN ISO 1833-18 BS EN ISO 1833-18 DIN EN ISO 1833-18 |
Textiles — Quantitative chemical analysis — Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) |
|
ISO 3759 EN ISO 3759 BS EN ISO 3759 DIN EN ISO 3759 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| ISO 3801 | Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area |
|
ISO 4920 EN ISO 4920 BS EN ISO 4920 DIN EN ISO 4920 |
Textile fabrics – Determination of resistance to surface wetting (Spray test) |
|
ISO 5077 EN ISO 5077 BS EN ISO 5077 DIN EN ISO 5077 |
Textiles — Determination of dimensional change in washing and drying |
|
ISO 6330 EN ISO 6330 BS EN ISO 6330 DIN EN ISO 6330 |
Textiles — Domestic washing and drying procedures for textile testing |
|
ISO 7768 EN ISO 7768 BS EN ISO 7768 DIN EN ISO 7768 |
Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing |
|
ISO 7769 EN ISO 7769 BS EN ISO 7769 DIN EN ISO 7769 |
Textiles — Test method for assessing the appearance of creases in fabrics after cleansing |
|
ISO 7770 EN ISO 7770 BS EN ISO 7770 DIN EN ISO 7770 |
Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing |
|
ISO 11643 EN ISO 11643 BS EN ISO 11643 DIN EN ISO 11643 |
Leather – Tests for colour fastness - Colour fastness of small samples to solvents |
|
EN 12127 BS EN 12127 DIN EN 12127 |
Textiles – Fabrics - Determination of mass per unit area using small samples |
|
ISO 12945-1 EN ISO 12945-1 BS EN ISO 12945-1 DIN EN ISO 12945-1 |
Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 1: Pilling box method |
|
ISO 12945-2 EN ISO 12945-2 BS EN ISO 12945-2 DIN EN ISO 12945-2 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling – Part 2: Modified Martindale method |
|
ISO 12947-2 EN ISO 12947-2 BS EN ISO 12947-2 DIN EN ISO 12947-2 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown |
|
ISO 13934-1 EN ISO 13934-1 BS EN ISO 13934-1 DIN EN ISO 13934-1 |
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
|
ISO 13934-2 EN ISO 13934-2 BS EN ISO 13934-2 DIN EN ISO 13934-2 |
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method |
|
ISO 13935-1 EN ISO 13935-1 BS EN ISO 13935-1 DIN EN ISO 13935-1 |
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method |
|
ISO 13935-2 EN ISO 13935-2 BS EN ISO 13935-2 DIN EN ISO 13935-2 |
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
|
ISO 13936-1 EN ISO 13936-1 BS EN ISO 13936-1 DIN EN ISO 13936-1 |
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics Part 1: Fixed seam opening method |
|
ISO 13936-2 EN ISO 13936-2 BS EN ISO 13936-2 DIN EN ISO 13936-2 |
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method |
|
ISO 13937-1 EN ISO 13937-1 BS EN ISO 13937-1 DIN EN ISO 13937-1 |
Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
|
ISO 13937-2 EN ISO 13937-2 BS EN ISO 13937-2 DIN EN ISO 13937-2 |
Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) |
|
ISO 13938-1 EN ISO 13938-1 BS EN ISO 13938-1 DIN EN ISO 13938-1 |
Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension |
|
ISO 15487 EN ISO 15487 BS EN ISO 15487 DIN EN ISO 15487 |
Textiles — Method for assessing appearance of apparel and other textile end products after domestic washing and drying |
|
ISO 15700 EN ISO 15700 BS EN ISO 15700 DIN EN ISO 15700 |
Leather – Tests for colour fastness - Colour fastness to water spotting |
|
ISO 15703 EN ISO 15703 BS EN ISO 15703 DIN EN ISO 15703 |
Leather – Tests for colour fastness - Colour fastness to mild washing |
| ISO 16322-1 | Textiles — Determination of spirality after laundering Part 1: Percentage of wale spirality change in knitted garments |
| ISO 16322-2 | Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics |
| ISO 16322-3 | Textiles — Determination of spirality after laundering Part 3: Woven and knitted garments |
|
EN 24920 BS EN 24920 DIN EN 24920 |
Textiles — Determination of resistance to surface wetting (spray test) of fabrics |
|
DIN 53160-1 BVL B 82.92-3 |
Determination of the colourfastness of articles for common use Part 1: Test with artificial saliva |
|
DIN 53160-2 BVL B 82.02-13 |
Determination of the colourfastness of articles for common use Part 2: Test with artificial sweat |
| DIN 54056 | Testing of colour fastness of textiles; determination of colour fastness of dyeings and prints to sublimation in storage |