HZLAB20220302 - 珩渥检测,国际第三方检测、认证、验厂、验货、咨询平台

HZLAB20220302返回 Back

英国

DETAIL OF ACCREDITATION
Materials/Products tested	Type of test/Properties measured/Range of measurement	Standard specifications/ Equipment/Techniques used
Motor Vehicles Motor Vehicle Accessories and Components Bicycles (powered) Construction Plant and Equipment Electrical/Electronic Components Electrical/Electronic Products Electro-mechanical Devices Electronic Products, Digital Generators: Power Industrial Trucks Lawnmowers Rescue Appliances Vehicle Security Devices Military Vehicles and Devices	1 EMC Tests 1.1 Automotive EMC Tests 1.1.1 Conducted Emissions 9 kHz to 200 MHz	CISPR 25:Section 3:1995 CISPR 25:2002 CISPR 25:2008 BS EN 55025:2003 (CISPR 25:2002) Section 6 BS EN 55025:2017 GBT 18387:2008 VDE 0879:Part 3:1981 DC 11224-2007 ES-XW7T-1A278-AC GMW 3097:2006 ECE Regulation 10.04:2012 Annex 13 & 14 ECE Regulation 10.05: 2014 Annex 19 & 20 ECE Regulation 10.06: 2019 Annex 13, 14, 19 & 20
	1.1.2 Magnetic Emissions 9 kHz to 30 MHz Whole Vehicle	GBT 18387:2008 GBT 18387:2017 BS EN IEC 55036:2020
	1.1.3 Radiated Emissions 9 kHz to 26.5 GHz Whole vehicle and components	CISPR 12:2001 CISPR12:2007 including A1:2009 CAN/CSA-CISPR12-10 GB 14023-2011 CISPR 25:Section 2:1995 CISPR 25:2002 CISPR 25:2008 BS EN 55025:2003 sections 5 and 6 BS EN 55025:2017
As listed on Page 1	1.1.3 Radiated Emissions 9 kHz to 26.5 GHz Whole vehicle and Components (cont’d)	GBT 18387:2008 GBT 18387:2017 ECE Regulation 10.01 ECE Regulation 10.02:1997 ECE Regulation 10.03:2010 ECE Regulation 10.04:2012 ECE Regulation 10.05:2014 Annexes 4, 5, 7 and 8 ECE Regulation 10.06:2019 Annexes 4, 5, 7 and 8 2000/2/EC 95/54/EC, Annexes IV, V, VII and VIII 2004/104/EC, Annexes IV, V, VII and VIII 97/24/EC, Chapter 8 Annexes II, III, V, VI SAE J551/2:1994 SAE J551/4:1994 SAE J1113-41:1995 ISO 13766:2006 DC 11224-2007 ES-XW7T-1A278-AC GMW 3097:2006
	1.1.4 Transient Testing DC and AC supply construction and coupling Exported Transients	ISO 7637-1:1990 ISO 7637-2:1990 ISO 7637-1:2002 ISO 7637-1: 2015 ISO 7637-2:2004 ISO 7637-2:2011 2004/104/EC Annex X ISO 7637-3:1995 ISO 7637-3:2007 ISO 7637-3:2016 ISO 13766:2006 ECE Regulation 10.04:2012 ECE Regulation 10.05:2014 Annexes 10 ECE Regulation 10.06:2019 Annexes 10
As listed on Page 1	1 EMC Tests (cont’d) 1.1 Automotive EMC Tests (cont’d) 1.1.5 Radiated Immunity Whole vehicle: 10 kHz to 30 MHz: 150 V/m 30 MHz to 40 MHz: 100 V/m 40 MHz to 1 GHz: 200 V/m 1 GHz to 18 GHz: 250 V/m (with 1.2 GHz to 1.4 GHz, 2.7 GHz to 3.1 GHz and 4 GHz to 10 GHz: 600 V/m) Component: 10 kHz to 1 GHz: 300 V/m 1 GHz to 18 GHz: 250 V/m (with 1.2 GHz to 1.4 GHz, 2.7 GHz to 3.1 GHz and	ISO 11451-1:2005 ISO 11451-1:2015 ISO 11451-2:1995 ISO 11451-2:2005 ISO 11451-2:2015 ISO DIS 11451-3:2003 ISO 11451-3:2007 ISO 11451-3:2015 ISO 11452-1:2005 ISO 11452-1:2015 ISO 11452-2:1995 ISO 11452-2:2004 ISO 11452-2:2019 ISO 11452-3:1995 ISO 11452-3:2001 ISO 11452-3:2016 ISO 11452-5:1995 ISO 11452-5:2002 ISO 11452-9:2012 SAE J1113-21:1998 95/54/EC, Annexes VI, IX 2004/104/EC Annexes VI, IX 2000/2/EC ECE Regulation 10.02:1997 ECE Regulation 10.03:2010 ECE Regulation 10.04:2012 ECE Regulation 10.05:2014 Annexes 6 and 9 ECE Regulation 10.06:2019 Annexes 6 and 9 ECE Regulation 13.08 97/24/EC, Chapter 8, Annexes IV,
As listed on Page 1		VII SAE J551/11:1994 SAE J551/13:1994 ISO 13766:2006 DC 11224-2007 ES-XW7T-1A278-AC GMW 3097:2006
As listed on Page 1	1 EMC Tests (cont’d) 1.1 Automotive EMC Tests (cont’d) 1.1.6 Electrostatic Discharge Up to 25 kV	ISO TR 10605/E:1994 (Component and whole vehicle) ISO 10605:2001 ISO 10605:2008 + Corr 1:2010 BS ISO 10605:2008 including Amendment A1:2014 Ford L-410, Section 4.3:12/96 SAE J551/15:1994 SAE J1113-13:1997 ISO 13766:2006 DC 11224-2007 ES-XW7T-1A278-AC GMW 3097:2006
	1.1.7 Conducted Immunity 150 kHz to 400 MHz, 10 V	ISO 11451-4:1995 ISO 11451-4:2013 ISO 11452-4:1995 ISO 11452-4:2005 ISO 11452-4:2011 excluding TWC test method ISO 11452-4:2020 excluding TWC test method SAE J1113-4:1998 DC 11224-2007 ES-XW7T-1A278-AC GMW 3097:2006
	1.1.8 Magnetic Field Immunity Up to 900 A/m	ISO 11452-8:2007 ISO 11452-8:2015
	1.1.9 Harmonics & Flicker	ECE Regulation 10.04:2012 ECE Regulation 10.05: 2014 Annex 11, 12, 17 & 18 ECE Regulation 10.06: 2019 Annex 11, 12, 17 & 18
	1.1.10 Burst & Surge	ECE Regulation 10.04:2012 ECE Regulation 10.05:2014 Annex 15, 16, 21 & 22 ECE Regulation 10.06:2019 Annex 15, 16, 21 & 22
As listed on Page 1	1 EMC Tests (cont’d) 1.2 Sub System Military EMC Tests 1.2.1 Conducted Emissions 20 Hz to 200 MHz	DEF STAN 59-41:Part 3:1995 DCE01 and DCE02 DEF STAN 59-41:Part 3: 2003 DCE01.3 and DCE02.3 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DCE01 and DCE02 DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DCE01.B, DCE02.A, DCE02.B and DCE03.B MIL STD 461F:2007 CE101 and CE102 MIL STD 461G:2015 CE101 and CE102
As listed on Page 1	1.2.2 Radiated Emissions 9 kHz to 40 GHz	DEF STAN 59-41:Part 3:1995 DRE01 and DRE03 DEF STAN 59-41:Part 3: 2003 DRE01.3 and DRE03.3 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DRE01 DRE03 and DRE04 DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DRE01.A, DRE01.B, DRE03.A and DRE03.B MIL STD 461E:1999, RE102 MIL STD 461F:2007, RE102 MIL STD 461G:2015 RE102
As listed on Page 1	1 EMC Tests (cont’d) 1.2 Military EMC Tests (cont’d) 1.2.3 Radiated Immunity Component: 10 kHz to 10 MHz: 356V/m 10MHz to 1GHz: 200 V/m 1 GHz to 18 GHz: 200 V/m (with 1.2 GHz to 1.4 GHz, 2.7 GHz to 3.1 GHz and 4 GHz to 10 GHz: 600 V/m)	DEF STAN 59-41:Part 3:1995 DRS02 DEF STAN 59-41:Part 3: 2003 DRS02.3 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DRS02 DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DRS02.A and DRS02.B MIL STD 461E:1999, RS103 MIL STD 461F:2007, RS103 MIL STD 461G:2015 RS103
	1.2.4 Electrostatic Discharge Up to 25 kV	DEF STAN 59-41:1995 & 2003 DCS10 DEF STAN 59-41:Part 3:2003 DCS10.3 DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DCS10.A and DCS10.B MIL STD 461G:2015, CS118
	1.2.5 Conducted Immunity 20 Hz to 400 MHz and 10 V	DEF STAN 59-41:Part 3:1995 DCS02 & DCS03 DEF STAN 59-41:Part 3: 2003 DCS02.3 & DCS03.3 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 High level bulk current injection DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DCS01, DCS02.A, DCS02.B, DCS03 & DCS05 MIL STD 461F:2007 CS101, CS114, CS115 & CS116
As listed on Page 1	1 EMC Tests (cont’d) 1.2 Military EMC Tests (cont’d) 1.2.6 Power Frequency Magnetic Field Immunity Frequency: 20 Hz to 100 kHz	DEF STAN 59-41:Part 3:1995 DRS01 DEF STAN 59-41:Part 3:2003 DRS01.3 DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DRS01.A, DRS01.B & DRS03 MIL STD 461F: 2007 RS101 MIL STD 461G:2015 RS101
	1.2.7 H-Field Emissions: 20 Hz to 100 kHz	DEF STAN 59-41:Part 3:1995 DRE02 DEF STAN 59-41:Part 3:2003 DRE02.3 DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DRE02.A and DRE02.B MIL STD 461F:2007RE101 MIL STD 461G:2015 RE101
	1.2.8 Electrical Transients Frequency: 20 Hz to 150 Hz	DEF STAN 59-411: Part 3 Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DCE03
	1.3 Platform Military EMC Tests 1.3.1 Conducted Emissions 20 Hz to 150 MHz	DEF STAN 59-41:Part 3:1995 DCE01 and DCE02 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.2 DCE01 and DCE02
As listed on Page 1	1 EMC Tests (cont’d) 1.3 Platform Military EMC Tests (cont’d) 1.3.2 Radiated Emissions 9 kHz to 40 GHz	MIL STD 461E:1999 RE102 MIL STD 461F:2007 RE102 MIL STD 461G:2015 RE102 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.3 DRE01, DRE03 and DRE04
	1.3.3 Radiated Immunity Whole vehicle: 10 kHz to 30 MHz: 150 V/m 30 MHz to 40 MHz: 100 V/m 40 MHz to 1 GHz: 200 V/m 1 GHz to 18 GHz: 250 V/m (with 1.2 GHz to 1.4 GHz, 2.7 GHz to 3.1 GHz and 4 GHz to 10 GHz: 600 V/m)	MIL STD 461E:1999 RS103 MIL STD 461F:2007 RS103 MIL STD 461G:2015 RS103 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.6.2 Low Level Swept Current DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.6.5 Radiated Immunity DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.8 Mutual Interference
	1.3.4 Electrostatic Discharge Up to 25 kV	DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 DCS10 MIL STD 461G:2015 CS118
As listed on Page 1	1 EMC Tests (cont’d) 1.3 Platform Military EMC Tests (cont’d) 1.3.5 Conducted Immunity 20 Hz to 400 MHz	DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.6.3 High Level Bulk Current Injection DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.5 DCS01, DCS02, DCS03 & DCS05 MIL STD 461F:2007 CS114 MIL STD 461G:2015 CS114
	1.3.6 Power Frequency Magnetic Field Immunity 20 Hz to 100 kHz H-Field Emissions: 20 Hz to 100 kHz	DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.7 DRS01 DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B2.4 DRE02 MIL STD 461F:2007 RE101 MIL STD 461G:2015 RE101
	1.3.7 Electrical Transients 20 Hz to 150 Hz	DEF STAN 61-5: Part 6: Issue 6:February 2009 Annexes A and B (All Sections)
	1.3.8 Earth Bonding	DEF STAN 59-411:Part 4: Issue 1: 2007, A1:2008 & Issue 2:2014 & Issue 3:2019 Section B.3 Earth Bonding
As listed on Page 1	1 EMC Tests (cont’d) 1.4 Civil EMC Tests 1.4.1 Conducted Emissions 9 kHz to 30 MHz	EN 55011:1998 EN 55014-1:1997 BS EN 55016-2-1:2009 + A2 2013 BS EN 55016-2-1:2014 + A1:2017 Excluding telecom ports according to Clause 9.5 EN 55022:1998 EN 55022:2010 BS EN 55032: 2012 BS EN 55032: 2015 FCC CFR 47:Part 15B:2008 ANSI C63.4:2003
	1.4.2 Radiated Emissions 30 MHz to 6 GHz 30 MHz to 40 GHz	BS EN 55016-2-3:2010 + A2 2014 BS EN 55016-2-3:2017 EN 55022:1998 EN 55022:2010 BS EN 55032:2012 BS EN 55032:2015 FCC CFR 47:Part 15B:2008 ANSI C63.4:2003
	1.4.3 Transient Testing DC and AC supply EFT/Burst, Surge & Voltage Dips, Interuptions and Variations	EN 61000-4-4:1995 BS EN 61000-4-4:2004 BS EN 61000-4-4:2012 BS EN 61000-4-5:2006 BS EN 61000-4-5:2014 including Amendment A1:2017 BS EN 61000-4-11:2004 + A1 2017
	1.4.4 Harmonics & Flicker	BS EN 61000-3-2: 2006 + A2 2009 BS EN 61000-3-2: 2014 BS EN 61000-3-2: 2019 (Excluding Class C) BS EN 61000-3-3: 2008 BS EN 61000-3-3: 2013 BS EN 61000-3-11: 2001 BS EN 61000-3-12: 2005 BS EN 61000-3-12: 2011
As listed on Page 1	1 EMC Tests (cont’d) 1.4 Civil EMC Tests (cont’d) 1.4.5 Radiated Immunity 80 MHz to 6 GHz	BS EN 61000-4-3:1997 BS EN 61000-4-3:2006 including Amendment A1:2008 & A2:2010 BS EN IEC 61000-4-3:2020
	1.4.6 Electrostatic Discharge Up to 25 kV	BS EN 61000-4-2:1995 including Amendments A1:1998 and A2:2001 BS EN 61000-4-2:2009
	1.4.7 Conducted Immunity 150 kHz to 400 MHz and 10 V	BS EN 61000-4-6:1996 including Amendments A1, A2, & A3:2005 BS EN 61000-4-6:2009 BS EN 61000-4-6:2014
	1.4.8 Power Frequency Magnetic Field Immunity Frequency: 50 Hz Field Strength: Up to 100 A/m	IEC 1000-4-8:1993 BS EN 61000-4-8:1994 BS EN 61000-4-8:2010
As listed on Page 1	1 EMC Tests (cont’d) 1.5 EMC Tests These Generic and Product specific specifications are included in this schedule, but limited to those referred basic standards that are explicitly listed in Sections 1.4.1 to 1.4.8.	EN 55014-2:1997 CISPR 14-2:1997 EN 61000-6-1:2001 BS EN 61000-6-1: 2007 EN 61000-6-1:2019 EN 61000-6-2:2001 BS EN 61000-6-2: 2005 EN 61000-6-2:2019 EN 61000-6-3:2001 BS EN 61000-6-3: 2007 including Amendment A1:2011 BS EN IEC 61000-6-3:2021 EN 61000-6-4:2001 BS EN 61000-6-4: 2007 including Amendment A1:2011 EN 61000-6-4:2019 BS EN IEC 61000-6-8:2020 BS EN 50082-1:1998 BS EN 12895:2015 including Amendment A1:2019 BS EN ISO 14982:1998 BS EN ISO 14982:2009 ISO 13766:2006 BS EN ISO 13766-1: 2018 BS EN ISO 13766-2: 2018 BS EN 61326:1996 IEC 61326:1997 (Immunity only) EN 13309:2000 EN 301 489-1:V1.4.1:2002 EN 301 489-3:V1.4.1:2002 72/245/EEC
As listed on Page 1		75/322/EEC 2009/64/EC EN 50498:2010 ISO 16750-2:2003 ISO 16750-2:2012 ECE Reg 97, Annex 7 Section 1 95/56/EC Annex IV 3.2, 5.2.12 and 8.2 ECE Reg 116, Rev 2, Annex 9, ISO 13309:2010
As Listed on Page 1	1.6 Electro Magnetic Exposure Magnetic Field 10 Hz to 60 MHz Electric Field 0 Hz to 18 GHz	BS EN 62311:2020 PD IEC TS 62764-1: 2019
	Facilities for EMC Testing: Semi-anechoic Chamber (SAC) 22 m x 10 m x 7 m high Door size: 3 m x 4.7 m high Max Load: 10 tonne Anechoic Chamber (RFI) 9.35 m x 7.35 m x 5.17 m high Door size: 4 m x 3.75 m high Max Floor Loading: 12 tonne Component Test Laboratory (CTL) Semi-anechoic Chamber 8 m x 4.5 m x 5 m Transient Test Laboratory 1 & 2 (TTL) Capable of performing Vehicle and component transients Heavy Vehicle Semi-Anechoic Chamber (HVSAC) 22 m x 11 m x 7 m high Door size: 4 m x 4 m Max Load: 70 tonne	Screened Room 1 5 m x 3 m x 4 m high Door size: 1 m x 2 m high Screened Room 2 3.6 m x 3.6 m x 2.5 m high Door size: 1 m x 2 m high Open Area Test Site (OATS) Range up to 30 metres Max size: 4.5 m high, 4 m wide Max weight: 14 tonnes (uncovered: 100 tonnes) Turntable diameter: 8 m Vehicle Electrical Test Laboratory (EWS) Vehicle preparations and Transients Electric Vehicle Test Laboratory (xEVL) Commercial and Vehicle Transients 90 kVA AC, 108 kW dc, 600 kW dc
Vehicle Security Devices	2 Vehicle Security Devices Type Approval Tests	95/56/EC, Annex VI 5.2.2.4, 5.2.2.5, 5.2.5, 5.2.6, 5.2.7, 5.2.9, 5.2.11, 5.2.13, 5.2.14 and 5.2.15 ECE Reg 97, 7.2.2.4, 7.2.2.5, 7.2.5, 7.2.6, 7.2.7, 7.2.9, 7.2.11, 7.2.13, 7.2.14 and 7.2.15 ECE Reg 116, Rev 2, Part II 6.4.2.2.4, 6.4.2.2.5, 6.4.2.5, 6.4.2.6, 6.4.2.7, 6.4.2.9, 6.4.2.11, 6.4.2.13, 6.4.2.14 and 6.4.2.15
Vehicle Brakes and Braking Systems Vehicles in EEC and ECE Categories M1, M2, M3, N1, N2, N3, O2, O3, O4 Plus Agricultural and Forestry Tractors	3 Straight line and static braking tests Type 0 Straight line braking (Full and part system) Type I, Type II and Type III Hot effectiveness (Fade tests) Park brake static and dynamic tests Static and dynamic system tests ABS efficiency and functional tests Temporary spare wheel tests The tests listed above would be carried out on cars, trucks, buses, trailers Straight line and static braking tests Type 0 Straight line braking Type I Hot effectiveness (Fade tests) Park brake static tests The tests listed above would be carried out on agricultural and forestry tractors Parameters measured: (All pressures stated are Gauge) Hydraulic pressure 0 to 150 bar Pneumatic pressure 0 to 10 bar Vacuum 0 to -0.9 bar	71/320 EEC as amended ECE Regulations 13.10, 13.11, and 13H ECE Regulation 139 ECE Regulation 64.00 FMVSS 135 76/432 EEC as amended
	Force 0 to 1000 N Temperature 0 to 300°C Deceleration 0 to 12 m/sec2 Velocity 0 to 200 km/h Time resolved to 50 ms Displacement +/- 200mm
Road Restraint Systems: Breakaway Device Poles Crash Cushions Longitudinal Barriers Safety Barriers Security Barriers Support Structures Terminals and Transitions Truck Mounted Attenuators Work Zone Traffic Control Devices Road Traffic Signs	4 Safety Performance Testing (Highway Safety and Protection of Infrastructure Facility) Speed range: up to 120 km/hr (for vehicle masses up to 40 tonnes) Angle: 0° to 165° (Roll, pitch, and yaw: up to 45°) System deformations/deflections (and lateral displacement): up to 3.5 m Post impact vehicle movement (including assessment of vehicle trajectory and response): up to 30 m Vehicle Cockpit Deformation Index (VCDI) Assessment of debris produced Computed measurements from onboard instrumentation: Theoretical Head Impact Velocity (THIV): 3 km/hr to 44 km/hr Occupant Impact Velocity (OIV): up to 12 m/s Post impact Head Deflection (PHD): up to 20 g	EN 1317-1:2010 EN 1317-2:2010 EN 1317-3:2010 DD ENV 1317-4:2002 BS EN 12767:2019 Documented In-House Procedure CR/0502 NCHRP Report 350 (Excluding Chapter 7) AASHTO MASH:2009 excluding Chapter 7 and Appendices B & D AASHTO MASH 2 : 2016 excluding the testing of cable barriers in the median position PAS 68:2007 (Excluding Para 11) PAS 68:2010 PAS 68:2013 (Excluding concrete cube testing) PAS 170-1 : 2017 excluding concrete cube testing SD-STD-02.01RevA March2003 ASTM F2656\F2656M-20 BS8442:2006 (Part 14) TD49/07 CWA 16221:2010
	Occupant Ride-down Acceleration (ORA): up to 20 g Acceleration Severity Index (ASI): 0.6 to 1.9	IWA 14-1:2013 (Excluding concrete cube testing)
Motor Vehicles Automotive Components and Equipment Rigidised Vehicles (Vehicle Bucks) Train Seats Aircraft Seats Rail interior crashworthiness	5 Frontal, Rear, and Side Impact Simulation Tests using a HyGe Gun (HyGe Facility) Temperature range: 19 °C to 23 °C (ambient) Acceleration: 2 g to 200 g (sled) 1 g to 2000 g (airbag firing) Load: up to 100 kN (3 axis) Pressure: 0.007 bar to 15 bar Displacement: up to 500 mm Current: 1 mA to 20 A Voltage: 2.5 mV to 100 V Velocity: up to 20 m/s Time: 0.5 ms to 125 s	ECE 11.03 ECE 17.07 inc Annex 6 ECE R17.08 ECE R17.09 ECE 80.01 74/408/EEC ADR 34/01 2005 ADR 68/00 2006 FIA 8855:1999 EASA 25.562 SAE AS 8049 Rail group standard GM/RT2100 issue 4 appendix E excluding paragraph 6.5
Motor Vehicles Steering Mechanisms Fuel System Integrity Vehicle Seats Seat Safety Belts Anthropomorphic Test Devices (for Occupant Injury)	6 Frontal, Rear, and Side Impact Tests using the Crash Test Hall and Hydraulic Winch (Crash Facility) Some tests include the use of Anthropomorphic Test Devices	ECE R12.03 ECE R32.00 ECE R34.03 Excluding annex 5 ECE R94.03 Frontal Offset ECE R95.03 Side impact ECE R135 ECE R137.01 EC 661/2009 EC 78/2009 FMVSS 204 FMVSS 208 FMVSS 212 FMVSS 214 Side Pole & Side MDB FMVSS 301 ADR 69/00 2007 ADR 72/00 2005 ADR 73/00 2005 ADR 85/00 2015 TRIAS 17(2)-J111 TRIAS 18−J023 Brazilian Contran Resolutions :- 220/07 221/07 463/73-13 463/73-07 463/73-04 48/98
Motor Vehicles Automotive Components and Equipment	7 Frontal, Rear, and Side Impact Simulation Tests using the Seat Back Moment Rig, the Drop Rig and Pendulum Rig (Structures Facility)	ECE R12.03 ECE R17.07 ECE R17.08 ECE R17.09 ECE R21.01
DETAIL OF ACCREDITATION
Materials/Products tested	Type of test/Properties measured/Range of measurement	Standard specifications/ Equipment/Techniques used
VEHICLES IN EEC & ECE CATEGORIES M1, M2, M3 N1, N2, N3 AEROSPACE COMPONENTS AND EQUIPMENT AGRICULTURE EQUIPMENT AUTOMOTIVE COMPONENTS AND ASSEMBLIES COMPUTER AND PERIPHERAL EQUIPMENT CONSTRUCTION PLANT EQUIPMENT DOMESTIC APPLIANCES AND COMPONENTS ELECTRICAL/ELECTRONIC COMPONENTS MARINE EQUIPMENT MINING PLANT AND EQUIPMENT PLASTIC COMPONENTS RECORDING/INDICATING EQUIPMENT TELECOMMUNICATION EQUIPMENT	ENVIRONMENTAL TESTING HIGH TEMPERATURE (Constant) Max temp: +120 °C Limiting chamber size: 3.0 m x 3.0 m x 3.0 m Max temp: +90 °C Limiting chamber size: 4.0 m x 3.0 m x 3.0 m LOW TEMPERATURE (Constant) Min temp: - 70 °C Limiting chamber size: 1.0 m x 1.0 m x 1.0 m Min temp: - 45 °C Limiting chamber size: 3.0 m x 3.0 m x 3.0 m Min temp: - 40 °C Limiting chamber size: 4.0 m x 3.0 m x 3.0 m	Documented In-House Methods, Customer Procedures and International Standards IEC 60068-2-2 :2007 BS EN 60068-2-2 :2007 GME 5034 (Sun Blinds) GME 01124 GME 01125 GME 01143 RTCA DO160G Section 4 MIL-STD-810G, Method 501.5 DEF STAN 00-35, Part 3, Issue 4, Test CL2, (superseded) IEC 60068-2-1 :2007 GME 5034 (Sun Blinds) GME 01124 GME 01125 GME 01143 RTCA DO160G Section 4 MIL-STD-810G, Method 501.5 DEF STAN 00-35, Part 3, Issue 4, Test CL5, (superseded)
As Listed on Page 2	ENVIRONMENTAL TESTING (cont’d) HIGH/LOW TEMPERATURE, WITHOUT HUMIDITY (Cyclic) Max temp: + 120 °C Min temp: - 45 °C Limiting chamber size: 3.0 m x 3.0 m x 3.0 m HIGH/LOW TEMPERATURE CYCLING WITH HUMIDITY (Cyclic) Max temp: + 85°C with humidity. +120°C (uncontrolled humidity) Min temp: - 45 °C (uncontrolled humidity) Humidity range: 40 %RH - 95 %RH Limiting chamber size: 3.0 m x 3.0 m x 3.0 m Max temp: + 85 °C Min temp: - 40 °C (uncontrolled humidity) Humidity range: 40 %RH - 80 %RH	IEC 60068-2-14:2009, Test Ng BS EN 60068-2-14:2009, Test Ng IEC 60068-2-38:2009 BS EN 60068-2-38:2009 GMW 14109 GMW 14113 (draft) DEF STAN 00-35, Part 3, Issue 4:2006, Test CL6, (superseded) RTCA DO160 G section 4. IEC / BS EN 60068-2-30:2005 MIL STD 810G Method 507.5 (superseded) BS EN 60068-2-78:2001,TestCab BS EN 60068-2-78:2013 TestCab MIL-STD-810G, Method 507.5 DEF STAN 00-35, Part 3, Issue 4, Test CL6, (superseded)
	Limiting chamber size: 4.0 m x 3.0 m x 3.0 m HIGH HUMIDITY - STEADY STATE Max temp: + 85°C Min temp: - 45 °C Uncontrolled humidity Humidity range: 40 %RH - 95 %RH Limiting chamber size: 3.0 m x 3.0 m x 3.0 m Max temp: + 85 °C Min temp: - 40 °C (Uncontrolled humidity) Humidity range: 40 %RH - 80 %RH Limiting chamber size: 4.0 m x 3.0 m x 3.0 m
	THERMAL SHOCK (Automatic Transfer) Max temp: + 135 °C Min temp: - 45 °C Limiting chamber size: 770 mm x 610 mm x 650 mm VIBRATION Sinusoidal and Random EM Vibrators Ambient and Climatic Peakthrust: 54.5 kN Frequency range: 5 Hz to 2.0 kHz Axes: Vertical and horizontal Climatic Vibration: Max temp: + 135 °C Min temp: - 60 °C Limiting chamber size: 1.0 m x 1.0 m x 1.0 m Max temp: + 135 °C Min temp: - 45 °C Humidity range: 40 %RH - 95 %RH Limiting chamber size: 3.0 m x 3.0 m x 3.0 m Max temp: + 90 °C Min temp: - 40 °C Humidity range: 40 %RH - 80 %RH Limiting chamber size: 4.0 m x 3.0 m x 3.0 m TEMPERATURE / HUMIDITY / LOW PRESSURE (Altitude)	IEC 60068-2-14:2009, Test Na BS EN 60068-2-14:2009, Test Na Sinusoidal IEC 60068-2-6:2008, Test Fc BS EN 60068-2-6:2008, Test Fc Mil Std 810G, method 514.6, Procedure 1 (superseded) DEF STAN 00-35, Part 3, issue 4, Test M1 RTCA DO160F, section 8 Random IEC 60068-2-64:2008 BS EN 60068-2-64:2008 GMW 7293 Mil Std 810G, method 514.6, Procedure 1, (superseded) DEF STAN 00-35, Part 3, issue 4, Test M1 (superseded) RTCA DO160F, section 8 Sine on Random Random on Random Mil Std 810G, method 514.6, Procedure 1, (superseded) DEF STAN 00-35, Part 3, issue 4, Test M1, (superseded) RTCA DO160F, section 8 MIL-STD-810G, Method 520.3 MIL-STD-810G, Method 500.5 procedures I & II only
	Temperature: -60oC to +100oC Humidity: 30% to 95%RH Pressure (Altitude): 8.4 mbar (100000 feet) MECHANICAL SHOCK Vibration systems Peak thrust : 54.5 kN Max accel : 50g Max displacement : 51mm p/p FREE FALL DROP (rough handling) Concrete or Plywood surface Max Ht: 2 m Max item mass: 200 kg DUST INGRESS PROTECTION Limiting chamber size: 1.0 m x 1.0 m x 1.0 m	DEF STAN 00-35, Part 3, Issue 4, Test CL11 (procedure A), CL12 & CL13, (superseded) IEC 60068-2-39:1976, Test M IEC 60068-2-40:1976, Test M IEC 60068-2-41:1976, Test M EN 60068-2-13:1999, Part 2, Test M IEC 60068-2-27:2009 BS EN 60068-2-27:2009 BS EN 60068-2-31:2008 BS EN 60068-2-32:1993 (withdrawn) DEF STAN 00-35, Part 3, Issue 4, Test M4 & M5, (superseded) MIL-STD-810G, Method 516.6 procedures IV & VI only SAE J575 SAE J1211:1978 (Alternate Method) BS ISO 20653:2006 IP5Kk, IP6Kk BS EN 60529:1992 IP5X Cat2 & IP6X Cat 2 DIN 40050-9 IP5Kk, IP6Kk
	DIMENSIONAL MEASUREMENTS Angle: 0° to 90° Length: up to 1 m	In-House Procedures Customer Procedures
Automotive Electronic Components Assemblies and Components	MECHANICAL CYCLING Pneumatic actuators Max stroke: 320 mm Max static thrust: 25 kN Associated Functional Exercising Automotive Components and Assemblies using In-House Test Equipment Voltage DC: 10 mV to 65V Current DC: 30 mA to 10 A Resistance: 0.1Ω to 10 MΩ Frequency: up to 1 MHz Time: 20 μs to 10 days Force application and measurement 0 N to 500 N	FORD CEPT 00.00-L-412 Documented In-House Methods and Customer Specifications In-House Procedure GE3039/0/01 and Customer Specifications

Calibration and Measurement Capability (CMC)
Measured Quantity Instrument or Gauge	Range	Expanded Measurement Uncertainty (k = 2)	Remarks
PRESSURE Gas Pressure Gauge Calibration of pressure indicating instruments and gauges Gas Pressure Absolute Calibration of pressure indicating instruments and gauges Hydraulic Pressure Gauge Calibration of pressure indicating instruments and gauges	-90 kPa to 0 Pa 0 to 2 MPa 10 kPa to 200 kPa 200 kPa to 2.1 MPa 0 to 50 MPa	0.024 % + 0.59 kPa 0.024 % + 0.59 kPa 0.15 kPa 0.022 % + 0.59 kPa 0.016 % + 0.11 MPa	Methods consistent with EURAMET CG17. Calibration of pressure devices with an electrical output can be undertaken
Values and uncertainties listed below are applicable for the calibration of both measurement instruments and for instruments with an output. the method used is by direct comparison unless otherwise stated in the remarks column.
ELECTRICAL DC VOLTAGE Generation Measurement	0 mV to 330 mV 330 mV to 3.3 V 3.3 V to 33 V 33 V to 330 V 330 V to 1000 V 0 mV to 200 mV 200 mV to 2 V 2 V to 20 V 20 V to 200 V 200 V to 1000 V	20 μV/V + 1.0 μV 11 μV/V + 2.0 μV 12 μV/V + 20 μV 18 μV/V + 150 μV 18 μV/V + 1.5 mV 47 μV/V + 1.2 μV 31 μV/V + 4.0 μV 31 μV/V + 80 μV 47 μV/V + 600 μV 51 μV/V + 6.0 mV
AC VOLTAGE Generation	1 mV to 33 mV 0.2 Hz to 10 Hz 10 Hz to 45 Hz 45 Hz to 10 kHz 10 kHz to 20 kHz 20 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 500 kHz 33 mV to 330 mV 0.2 Hz to 10 Hz 10 Hz to 45 Hz 45 Hz to 10 kHz 10 kHz to 20 kHz 20 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 500 kHz 0.33 V to 3.3 V 0.2 Hz to 10 Hz 10 Hz to 45 Hz 45 Hz to 10 kHz 10 kHz to 20 kHz 20 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 500 kHz 3.3 V to 10.23 V 0.2 Hz to 10 Hz 3.3 V to 33 V 10 Hz to 45 Hz 45 Hz to 10 kHz 10 kHz to 20 kHz 20 kHz to 50 kHz 50 kHz to 100 kHz 33 V to 330 V 10 Hz to 45 Hz 45 Hz to 10 kHz 10 kHz to 20 kHz 20 kHz to 50 kHz 50 kHz to 100 kHz 330 V to 1020 V 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz	800 μV/V + 100 μV 800 μV/V + 100 μV 150 μV/V + 100 μV 200 μV/V + 100 μV 0.10 % + 100 μV 0.35 % + 110 μV 0.80 % + 150 μV 300 μV/V + 120 μV 300 μV/V + 120 μV 150 μV/V + 120 μV 160 μV/V + 120 μV 350 μV/V + 120 μV 800 μV/V + 140 μV 0.20 % + 190 μV 300 μV/V + 400 μV 300 μV/V + 400 μV 150 μV/V + 400 μV 190 μV/V + 400 μV 300 μV/V + 400 μV 700 μV/V + 460 μV 0.24 % + 1.2 mV 300 μV/V + 4.5 mV 300 μV/V + 4.0 mV 150 μV/V + 4.0 mV 240 μV/V + 4.0 mV 350 μV/V + 4.0 mV 900 μV/V + 5.0 mV 190 μV/V + 30 mV 200 μV/V + 30 mV 250 μV/V + 30 mV 300 μV/V + 30 mV 0.20 % + 80 mV 300 μV/V + 120 mV 250 μV/V + 120 mV 300 μV/V + 120 mV
AC VOLTAGE (cont’d) Measurement	20 mV to 200 mV 0.2 Hz to 10 Hz 1 mV to 200 mV 10 Hz to 50 Hz 50 Hz to 100 Hz 100 Hz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 200 kHz 200 kHz to 1 MHz 1 MHz to 2 MHz 0.2 V to 2 V 0.2 Hz to 10 Hz 10 Hz to 50 Hz 50 Hz to 100 Hz 100 Hz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 200 kHz 200 kHz to 1 MHz 1 MHz to 2 MHz	0.40 % 0.30 % + 30 μV 0.080 % + 30 μV 0.060 % + 30 μV 0.070 % + 30 μV 0.36 % + 30 μV 0.91 % + 50 μV 2.0 % + 200 μV 5.0 % + 400 μV 0.40 % 0.31 % + 300 μV 0.080 % + 300 μV 0.060 % + 300 μV 0.060 % + 300 μV 0.36 % + 300 μV 0.91 % + 500 μV 2.0 % + 2.0 mV 5.0 % + 4.0 mV
AC VOLTAGE (cont’d) Measurement	2 V to 20 V 0.2 Hz to 10 Hz 10 Hz to 50 Hz 50 Hz to 100 Hz 100 Hz to 2 kHz 2 kHz to 10 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 10 kHz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 200 kHz 200 kHz to 1 MHz 1 MHz to 2 MHz 20 V to 200 V 0.2 Hz to 10 Hz 10 Hz to 50 Hz 50 Hz to 100 Hz 100 Hz to 2 kHz 2 kHz to 10 kHz 10 kHz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 100 kHz to 200 kHz 200 kHz to 1 MHz 1 MHz to 2 MHz 200 V to 750 V 50 Hz to 100 Hz 100 Hz to 2 kHz 2 kHz to 10 kHz 10 kHz to 25 kHz	0.40% 0.30 % + 3.0 mV 0.080 % + 3.0 mV 0.070 % + 3.0 mV 0.10 % + 3.0 mV 0.060 % + 30 µV 0.30 % + 300 µV 0.15 % + 3.0 mV 0.16 % + 3.0 mV 0.36 % + 3.0 mV 0.90 % + 5.0 mV 4.0 % + 40 mV 7.0 % + 40 mV 0.40% 0.31 % + 30 mV 0.08 % + 30 mV 0.08 % + 30 mV 0.11 % + 30 mV 0.15 % + 30 mV 0.16 % + 30 mV 0.37 % + 30 mV 0.90 % + 5.0 mV 4.0 % + 40 mV 4.0 % + 40 mV 0.39 % + 110 mV 0.19 % + 110 mV 0.23 % + 110 mV 0.28 % + 110 mV
DC CURRENT Generation Measurement AC CURRENT Generation	0 μA to 330 μA 330 μA to 3.3 mA 3.3 mA to 33 mA 33 mA to 330 mA 330 mA to 1.1 A 1.1 A to 3 A 3 A to 11 A 11 A to 20.5 A 10 A to 16.5 A 16.5 A to 150 A 150 A to 1025 A 0 μA to 200 μA 200 μA to 2 mA 2 mA to 20 mA 20 mA to 200 mA 200 mA to 2 A 29 μA to 330 μA 10 Hz to 20 Hz 20 Hz to 45 Hz 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz 10 kHz to 30 kHz 330 μA to 3.3 mA 10 Hz to 20 Hz 20 Hz to 45 Hz 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz 10 kHz to 30 kHz	150 μA/A + 25 nA 110 μA/A + 100 nA 100 μA/A + 2.0 μA 100 μA/A + 20 μA 210 μA/A + 80 μA 390 μA/A + 1.0 mA 510 μA/A + 2.5 mA 0.10 % + 4.0 mA 0.25 % + 3.0 mA 0.25 % + 1.0 A 0.25 % +1.5 A 610 μA/A + 5.0 nA 480 μA/A + 40 nA 480 μA/A + 0.40 μA 600 μA/A + 4.0 μA 0.11 % + 40 μA 0.20 % + 730 nA 0.15 % + 700 nA 0.13 % + 700 nA 0.30 % + 700 nA 0.80 % + 870 nA 1.6 % + 2.0 μA 0.20 % + 2,0 μA 0.13 % + 2.0 μA 0.10 % + 2.0 μA 0.20 % + 2.0 μA 0.50 % + 2.2 μA 1.0 % + 2.5 μA	For the calibration of toroidal clamp-on ammeters
DC CURRENT Generation Measurement AC CURRENT Generation	3.3 mA to 33 mA 10 Hz to 20 Hz 20 Hz to 45 Hz 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz 10 kHz to 30 kHz 33 mA to 330 mA 10 Hz to 20 Hz 20 Hz to 45 Hz 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz 10 kHz to 30 kHz	0.18 % + 10 μA 0.090 % + 10 μA 0.040 % + 10 μA 0.080 % + 10 μA 0.20 % + 15 μA 0.40 % + 15 μA 0.18 % + 100 μA 0.090 % + 100 μA 0.040 % + 100 μA 0.10 % + 120 μA 0.20 % + 200 μA 0.40 % + 300 μA	For the calibration of toroidal clamp-on ammeters
AC CURRENT (cont’d) Generation (cont’d) Measurement	330 mA to 1.1 A 10 Hz to 45 Hz 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz 1.1 A to 3 A 10 Hz to 45 Hz 45 Hz to 1 kHz 1 kHz to 5 kHz 5 kHz to 10 kHz 3 A to 11 A 45 Hz to 100 Hz 100 Hz to 1 kHz 1 kHz to 5 kHz 11 A to 20 A 45 Hz to 100 Hz 100 Hz to 1 kHz 1 kHz to 5 kHz 10 A to 16.5 A 45 Hz to 65 Hz 65 Hz to 440 Hz 16.5 A to 150 A 45 Hz to 65 Hz 65 Hz to 440 Hz 150 A to 1025 A 45 Hz to 65 Hz 65 Hz to 440 Hz	0.18 % + 780 μA 0.050 % + 780 μA 0.60 % + 1.8 mA 2.5 % + 6.0 mA 0.18 % + 1.3 mA 0.060 % + 1.3 mA 0.60 % + 2.2 mA 2.5 % + 6.2 mA 0.060 % + 9.0 mA 0.10 % + 9.0 mA 3.0 % + 9.0 mA 0.12 % + 15 mA 0.15 % + 15 mA 3.0 % + 15 mA 0.28 % + 3.0 mA 0.79 % + 3.0 mA 0.28 % + 13 mA 0.79 % + 13 mA 0.28 % + 40 mA 0.79 % + 40 mA	For the calibration of toroidal clamp-on ammeters For the calibration of toroidal clamp-on ammeters For the calibration of toroidal clamp-on ammeters
AC CURRENT (cont’d) Generation (cont’d) Measurement	0 µA to 200 µA 40 Hz to 50 Hz 50 Hz to 200 Hz 200 Hz to 1 kHz 1 kHz to 10 kHz 200 µA to 2 mA 40 Hz to 50 Hz 50 Hz to 1 kHz 1 kHz Hz to 10 kHz 10 kHz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 2 mA to 20 mA 40 Hz to 50 Hz 50 Hz to 200 Hz 200 Hz to 1 kHz 1 kHz to 10 kHz 10 kHz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz	0.42 % + 30 nA 0.24 % + 30 nA 0.48 % + 30 nA 0.57 % + 30 nA 0.36 % + 300 nA 0.18 % + 300 nA 0.15 % + 300 nA 0.15 % + 300 nA 0.30 % + 300 nA 0.50 % + 300 nA 0.36 % + 3.0 µA 0.18 % + 3.0 µA 0.15 % + 3.0 µA 0.15 % + 3.0 µA 0.25 % + 3.0 µA 0.30 % + 3.0 µA 0.50 % + 3.0 µA
AC CURRENT (cont’d) Measurement (cont’d) DC RESISTANCE Generation Measurement	20 mA to 200 mA 40 Hz to 50 Hz 50 Hz to 200 Hz 200 Hz to 1 kHz 1 kHz to 10 kHz 10 kHz to 30 kHz 30 kHz to 50 kHz 50 kHz to 100 kHz 0.2 A to 2 A 40 Hz to 50 Hz 50 Hz to 200 Hz 200 Hz to 1 kHz 1 kHz to 10 kHz 10 kHz to 30 kHz 30 kHz to 50 kHz 0 Ω to 11 Ω 11 Ω to 33 Ω 33 Ω to 110 Ω 110 Ω to 330 Ω 330 Ω to 1.1 kΩ 1.1 kΩ to 3.3 kΩ 3.3 kΩ to 11 kΩ 11 kΩ to 33 kΩ 33 kΩ to 110 kΩ 110 kΩ to 330 kΩ 330 kΩ to 1.1 MΩ 1.1 MΩ to 3.3 MΩ 3.3 MΩ to 11 MΩ 11 MΩ to 33 MΩ	0.36 % + 30 µA 0.18 % + 30 µA 0.15 % + 30 µA 0.21 % + 30 µA 0.50 % + 30 µA 1.0 % + 30 µA 3.0 % + 30 µA 0.42 % + 300 µA 0.24 % + 300 µA 0.36 % + 300 µA 0.52 % + 300 µA 1.5 % + 300 µA 4.0 % + 300 µA 40 μΩ/Ω + 2.0 mΩ 30 μΩ/Ω + 3.1 mΩ 28 μΩ/Ω + 4.0 mΩ 28 μΩ/Ω + 6.3 mΩ 28 μΩ/Ω + 20 mΩ 28 μΩ/Ω + 51 mΩ 28 μΩ/Ω + 150 mΩ 28 μΩ/Ω + 480 mΩ 28 μΩ/Ω + 550 mΩ 32 μΩ/Ω + 14 Ω 32 μΩ/Ω + 24 Ω 60 μΩ/Ω + 110 Ω 130 μΩ/Ω + 360 Ω 250 μΩ/Ω + 4.1 kΩ
	33 MΩ to 110 MΩ 110 MΩ to 330 MΩ 330 MΩ to 1.1 GΩ 0 Ω to 20 Ω 20 Ω to 200 Ω 200 Ω to 2 kΩ 2 kΩ to 20 kΩ 20 kΩ to 200 kΩ 200 kΩ to 2 MΩ 2 MΩ to 20 MΩ 20 MΩ to 200 MΩ 200 MΩ to 1 GΩ	500 μΩ/Ω + 19 kΩ 0.30 % + 230 kΩ 1.5 % + 1.2 MΩ 94 μΩ/Ω + 6.1 mΩ 67 μΩ/Ω + 7.4 mΩ 59 μΩ/Ω + 14 mΩ 69 μΩ/Ω + 80 mΩ 120 μΩ/Ω + 900 mΩ 190 μΩ/Ω + 9.0 Ω 0.11 % + 90 Ω 2.4 % + 20 kΩ 4.0 % + 200 kΩ
CALIBRATION OF CHARGE AMPLIFIERS Attenuation With reference to a set value of 3 V TEMPERATURE SIMULATION Thermocouple type K J N T T K J N T T	1 pC to 33 pC 200 mHz to 10 Hz 10 Hz to 45 Hz 63 Hz to 10 kHz 33 pC to 330 pC 200 mHz to 10 Hz 10 Hz to 45 Hz 63 Hz to 10 kHz 330 pC to 3300 pC 200 mHz to 10 Hz 10 Hz to 45 Hz 63 Hz to 10 kHz 3300 pC to 33000 pC 200 mHz to 10 Hz 10 Hz to 45 Hz 63 Hz to 10 kHz 33000 pC to 100000 pC 200 mHz to 10 Hz 10 Hz to 45 Hz 63 Hz to 10 kHz 0 dB to 30 dB DC and 3 Hz to 10 kHz -200 °C to +1300 °C -210 °C to +1200 °C -200 °C to +1300 °C -250 °C to -150 °C -150 °C to +400 °C -200 °C to +1300 °C -210 °C to +1200 °C -200 °C to +1300 °C -250 °C to -150 °C -150 °C to +400 °C	1.2 % 0.093 % + 0.0060 pC 0.020 % + 0.0060 pC 1.2 % 0.036 % + 0.0080 pC 0.020 % + 0.0080 pC 1.2 % 0.036 % + 0.050 pC 0.020 % + 0.060 pC 1.2 % 0.036 % + 0.65 pC 0.020 % + 0.60 pC 1.2 % 0.024 % + 2.0 pC 0.025 % + 6.0 pC 0.020 dB 0.30 °C 0.26 °C 0.36 °C 0.31 °C 0.25 °C 0.23 °C 0.16 °C 0.30 °C 0.23 °C 0.16 °C	Including reference junction compenstation Excluding reference junction compenstation
FREQUENCY Generation Measurement ANGULAR VELOCITY Calibration of angular velocity sensors Applied angular velocity Output voltage measurement	10 mHz to 30 MHz 1 mHz to 225 MHz 10 °/s to 2000 °/s 0 V to 200 mV 200 mV to 2 V 2 V to 20 V	2.0 in 1011 0.05 μHz/Hz 0.13 % of angular velocity 560 μV/V + 150 μV 560 μV/V + 150 μV 560 μV/V + 170 μV	Ambient temperature 18 °C to 22 °C.

DETAIL OF ACCREDITATION
Product		Standard
Functional Safety - Road Vehicles		ISO 26262:2011 (all subparts) Functional Safety Management up to ASIL D for the audit of process for the complete lifecycle Functional Safety Audit up to ASIL D for the audit of application of process for the complete safety lifecycle ISO 26262:2018 (all subparts) Functional Safety Management up to ASIL D for the audit of process for the complete lifecycle Functional Safety Audit up to ASIL D for the audit of application of process for the complete safety lifecycle
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation	Conformity Assessment procedure/ Module/article	Category of products or individual products	Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.	Annex V- Product Certification Body (AVCP) System 1	96/579/EC Circulation fixtures (1/2) : - Vehicle restraint barriers: transition barriers (for circulation areas), Vehicle restraint systems: crash cushions (for circulation areas), Vehicle restraint systems: cables (for circulation areas), Vehicle restraint systems: parapets (for circulation areas).	EN 1317-5:2007+A2:2012 EN 1317-5:2007+ A2:2012 /AC:2012
Radio Equipment Regulations 2017	EU-type examination Module B (Annex III)	SRDs, (including embedded modules as per RTTECA TGN01)	Conformity assessment type examination procedure in accordance with Article 17 and Annex III
Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001	Internal control of production with assessment of technical documentation and periodical checking (Annex VI)* (Schedule 9 of the SI)* Full Quality Assurance (Annex VIII) (Schedule 11 of the SI)	Schedule 1 Items: For all 22 categories	Conformity assessment procedures in accordance with Article 14 and Annexes VI and VIII of the Directive and Regulation 10 and Schedule 9 and 11 of the SI
Electromagnetic Compatibility Regulations 2016	EU-type examination Module B (Annex III)	Alarm Systems Automotive Systems AV Equipment Domestic Appliances Industrial Equipment IT Equipment Laboratory & Test Equipment Military Equipment Transmission Systems	General Requirements Annex I of the Directive and Schedule 1 of the SI.
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020	Annex V- Product Certification Body (AVCP) System 1	96/579/EC Circulation fixtures (1/2) : - Vehicle restraint barriers: transition barriers (for circulation areas), Vehicle restraint systems: crash cushions (for circulation areas), Vehicle restraint systems: cables (for circulation areas), Vehicle restraint systems: parapets (for circulation areas).	EN 1317-5:2007+A2:2012 EN 1317-5:2007+ A2:2012 /AC:2012
Radio Equipment (Directive 2014/53/EU) implemented in Northern Ireland by the Radio Equipment Regulations 2017	EU-type examination Module B (Annex III)	SRDs, (including embedded modules as per RTTECA TGN01)	Conformity assessment type examination procedure in accordance with Article 17 and Annex III
Noise Emissions in the Environment (Directive 2000/14/EC) by Equipment for use Outdoors implemented in Northern Ireland by the Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001.	Internal control of production with assessment of technical documentation and periodical checking (Annex VI)* (Schedule 9 of the SI)* Full Quality Assurance (Annex VIII) (Schedule 11 of the SI)	Schedule 1 Items: For all 22 categories	Conformity assessment procedures in accordance with Article 14 and Annexes VI and VIII of the Directive and Regulation 10 and Schedule 9 and 11 of the SI
Electromagnetic Compatibility (Directive 2014/30/EU) implemented in Northern Ireland by the Electromagnetic Compatibility Regulation 2016	EU-type examination Module B (Annex III)	Alarm Systems Automotive Systems AV Equipment Domestic Appliances Industrial Equipment IT Equipment Laboratory & Test Equipment Military Equipment Transmission Systems	General Requirements Annex I of the Directive and Schedule 1 of the SI.

ABOUT US

LEAFLETS

COOPERATION

PROCESS

NORMS

CONTACT

JOIN US

APPLICATION

OMS