|
Plumbing |
|
|
ANSI Z21.22/CSA 4.4 |
Relief valves for hot water supply systems |
|
AS 681.1 |
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
|
AS 681.2 |
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
|
AS 1145.2 |
Determination of tensile properties of plastics materials - Test conditions for moulding and extrusion plastics |
|
AS 1172.1 |
Sanitary plumbing products Part 1: Water closet pans |
|
AS 1172.2 |
Water closets (WCs) - Flushing devices and cistern inlet and outlet valves |
|
AS 1172.3 |
Sanitary plumbing products - Personal hygiene fixtures and appliances - Bidets and bidettes |
|
AS 1357.1 |
Valves Primarily for Use in Heated Water Systems Part 1: Protection Valves |
|
AS 1357.2 |
Valves primarily for use in heated water systems - Control valves |
|
AS 1371 |
Toilet Seats and Fittings |
|
AS 1432 |
Copper tubes for plumbing, gas fitting and drainage applications |
|
AS 1462.17 |
Methods of test for unplasticized PVC (UPVC) pipes and fittings - Method for testing pressure pipe joints with elastomeric seals |
|
AS 1565 |
Copper and copper alloys - Ingots and castings |
|
AS 1589 |
Copper and copper alloy waste fittings |
|
AS 1628 |
Water supply - Metallic gate, globe and non-return valves |
|
AS 1646 |
Elastomeric seals for waterworks purposes |
|
AS 1756 |
Household sinks |
|
AS 1769 |
Welded stainless steel tubes for plumbing applications |
|
AS 1976 |
Vitreous china used in sanitary appliance |
|
AS 2084 |
Non-destructive testing - Eddy current testing of metal tubes |
|
AS 2345 |
Dezincification resistance of copper alloys |
|
AS 2845.2 |
Water supply - backflow preventions devices - registered air gaps and registered break tanks |
|
AS 2887 |
Plastic waste fittings |
|
AS 2888.1 |
Methods of testing plastics waste fittings - Method of determining the suitability of connection threads of BSP form |
|
AS 2888.2 |
Methods of testing plastics waste fittings - Method for determining dimensions |
|
AS 2888.3 |
Methods of testing plastics waste fittings - Method for pressure testing of plastics waste fittings |
|
AS 2888.4 |
Methods of testing plastics waste fittings - Method for air pressure/vacuum testing of plastics waste fittings |
|
AS 2888.5 |
Methods of testing plastics waste fittings - Trap seal test |
|
AS 2888.6 |
Methods of testing plastics waste fittings - Method for load testing of plastics waste outlets |
|
AS 2888.7 |
Methods of testing plastics waste fittings - Method for testing the seal of plastics waste outlets |
|
AS 2888.8 |
Methods of testing plastics waste fittings - Thermal cycling test |
|
AS 2888.9 |
Methods of testing plastics waste fittings - Method for determining residual stress in plastics waste fittings |
|
AS 2888.10 |
Methods of testing plastics waste fittings - Method for leak testing plastics pan connectors |
|
AS 2888.11 |
Methods of testing plastics waste fittings - Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type) |
|
AS 3494 |
Bidettes and bidets |
|
AS 3498 |
Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
|
AS 3588 |
Shower Bases and Shower Modules |
|
AS 3688 |
Water supply and gas systems - Metallic fittings and end connectors |
|
AS 3952 |
Water supply - Spring hydrant valve for waterworks purposes |
|
AS 4032.1 |
Water supply - Valves for the control of heated water supply temperatures - Thermostatic mixing valves - Materials design and performance requirements |
|
AS 4032.2 |
Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end-of-line temperature-actuated devices |
|
AS 4032.3 |
Water supply - Valves for the control of hot water supply temperatures - Requirements for field testing, maintenance or replacement of thermostatic mixing valves, tempering valves and end of line temperature control devices |
|
AS 4087 |
Metallic flanges for waterworks purposes |
|
AS 4176.1 |
Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - General |
|
AS 4176.2 |
Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - Pipes |
|
AS 4176.3 |
Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - Fittings |
|
AS 4176.5 |
Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system |
|
AS 4176.7 |
Multilayer pipes for pressure applications Part 7: Multilayer piping systems for hot and cold water plumbing applications— Assessment of conformity |
|
AS 4176.8 |
Multilayer pipes for pressure applications - Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (exclusion: Section 5.5.2 additional requirements, table 1 physical properties, odorant permeability) |
|
AS 4617 |
Manual shut off gas valves |
|
AS 4794 |
Non-return valves - Swing check and tilting disc |
|
AS 4795.1 |
Butterfly valves for waterworks purposes - Wafer and lugged |
|
AS 4795.2 |
Butterfly valves for waterworks purposes - Double flanged |
|
AS 4796 |
Water supply - metal-bodied and plastic-bodied ball valves for property service connection |
|
AS 5081 |
Hydraulically operated automatic control valves for waterworks purposes |
|
AS 5612 |
Butterfly valves for general purposes |
|
AS 5830.1 |
In-line ball valves for use in plumbing water supply systems - metal-bodied |
|
AS 5830.2 |
In-line ball valves for use in plumbing water supply systems - plastics-bodied |
|
AS/NZS 1254 |
PVC-U pipes and fittings for stormwater and surface water applications |
|
AS/NZS 1260 |
PVC-U pipes and fittings for drain, waste and vent application |
|
AS/NZS 1462.1 |
Methods of test for plastics pipes and fittings - method for determining the dimensions of pipes and fittings |
|
AS/NZS 1462.3 |
Methods of test for plastics pipes and fittings - Method for determining the impact characteristics of pipes |
|
AS/NZS 1462.4 |
Methods of test for plastics pipes and fittings - method of determining reversion of UPVC pipes |
|
AS/NZS 1462.6 |
Methods of test for plastics pipes and fittings - thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - resistance to internal pressure |
|
AS/NZS 1462.8 |
Methods of test for plastics pipes and fittings - method of testing the leak tightness of assemblies |
|
AS/NZS 1462.10 |
Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications |
|
AS/NZS 1462.11 |
Methods of test for PVC pipes and fittings - method for high temperature stress- relief testing of fittings |
|
AS/NZS 1462.13 |
Methods of test for plastics pipes and fittings - Method for the determination of elastomeric seal joint contact width and pressure |
|
AS/NZS 1462.16 |
Methods of test for plastics pipes and fittings - method for high temperature testing of pipe |
|
AS/NZS 1462.22 |
Methods of test for plastics pipes and fittings - Method for the determination of pipe stiffness |
|
AS/NZS 1462.23 |
Methods of test for plastics pipes and fittings - Method for determination of ring flexibility |
|
AS/NZS 1462.25 |
Methods of test for plastics pipes and fittings - Determination of slow-crack- growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method |
|
AS/NZS 1477 |
PVC pipes and fittings for pressure applications |
|
AS/NZS 1567 |
Copper and copper alloys - Wrought rods, bars and sections |
|
AS/NZS 1568 |
Copper and copper alloys - Forging stock and forgings |
|
AS/NZS 1571 |
Copper- seamless tubes for air conditioning and refrigeration |
|
AS/NZS 1572 |
Copper and copper alloys - Seamless tubes for engineering purposes |
|
AS/NZS 1730 |
Washbasins |
|
AS/NZS 2023 |
Baths for ablutionary purposes |
|
AS/NZS 2280 |
Ductile iron pipes and fittings |
|
AS/NZS 2492 |
Cross-linked polyethylene (PE-X) pipes for pressure applications |
|
AS/NZS 2537.1 |
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - General |
|
AS/NZS 2537.2 |
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - Fittings |
|
AS/NZS 2537.3 |
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - fitness for purpose of the system |
|
AS/NZS 2537.5 |
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - plastics pipes and fittings - crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - metric series - specifications - fittings for mechanical jointing (including PE-X/metal transitions) |
|
AS/NZS 2638.1 |
Gate valves for waterworks purposes - metal seated |
|
AS/NZS 2638.2 |
Gate valves for waterworks purposes - resilient seated |
|
AS/NZS 2642.2 |
Polybutylene (PB) plumbing pipe systems - polybutylene (PB) pipe for hot and cold water applications |
|
AS/NZS 2642.3 |
Polybutylene (PB) plumbing pipe systems - mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
|
AS/NZS 2845.1 |
Water supply - backflow prevention devices - Materials, design and performance requirements |
|
AS/NZS 3499 |
Water supply - flexible hose assemblies |
|
AS/NZS 3500.1 |
Plumbing and Drainage - Part 1: Water services |
|
AS/NZS 3518 |
Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications |
|
AS/NZS 3662 |
Performance of showers for bathing |
|
AS/NZS 3718 |
Water supply - Tap ware |
|
AS/NZS 3982 |
Urinals |
|
AS/NZS 4129 |
Fittings for polyethylene (PE) pipes for pressure applications |
|
AS/NZS 4130 |
Polyethylene (PE) pipes for pressure applications |
|
AS/NZS 4131 |
Polyethylene (PE) compounds for pressure pipes and fittings |
|
AS/NZS 4348 |
Water supply - Domestic type water treatment appliances - Performance requirements |
|
AS/NZS 4401 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - polyethylene (PE) |
|
AS/NZS 4692.1 |
Electric water heaters Part 1: Energy consumption, performance and general requirements |
|
AS/NZS 4765 |
Modified PVC (PVC-M) pipes for pressure applications |
|
AS/NZS 4998 |
Bolted unrestrained mechanical couplings for waterworks purposes |
|
AS/NZS 5065 |
Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications |
|
AS/NZS 6400 |
Water efficient products - rating and labelling |
|
ASME A112.4.2/ CSA B45.16 |
Personal hygiene devices for water closets |
|
ASME A112.18.1/CSA B125.1 |
Plumbing supply fittings |
|
ASME A112.18.2 |
Plumbing waste fittings |
|
ASME A112.18.3 |
Performance requirements for backflow protection devices and systems in plumbing fixture fittings |
|
ASME A112.18.6 |
Flexible water connectors |
|
ASME A112.19.2 |
Ceramic plumbing fixtures |
|
ASME A112.19.3 |
Stainless steel plumbing fixtures |
|
ASME A112.19.5 |
Flush valves and spuds for water closets, urinals, and tanks |
|
ASME A112.19.6 |
Hydraulic Performance Requirements for Water Closets and Urinals |
|
ASME A112.19.14 |
Six-liter water closets equipped with a dual flushing device |
|
ASME A112.1016 |
Performance requirements for automatic compensating valves for individual showers and tub/shower combinations |
|
ASME B16.22 |
Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings |
|
ASSE 1002 |
Anti-siphon fill valves for water closet tanks |
|
ASSE 1014 |
Hand-held showers |
|
ASSE 1016 |
Performance requirements for automatic compensating valves for individual showers and tub/shower combinations |
|
ASSE 1019 |
Performance requirements for wall hydrant with backflow protection and freeze resistance |
|
ASSE 1061 |
Performance requirements for push-fit fittings |
|
ASTM A269 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
|
ASTM A276 |
Standard Specification for Stainless Steel Bars and Shapes |
|
ASTM A888 |
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
|
ASTM D1785 |
Standard specification for poly(vinyl chloride) (PVC) plastic pipe, schedules 40, 80, and 120 |
|
ASTM D2241 |
Standard specification for poly(vinyl chloride) (PVC) pressure-rated pipe (SDR series) |
|
ASTM D2661 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM D2665 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM E243 |
Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
|
ASTM F876 |
Standard specification for crosslinked polyethylene (PEX) tubing |
|
ASTM F877 |
Standard specification for crosslinked polyethylene (PEX) hot- and cold-water distribution systems |
|
ASTM F1807 |
Standard specification for metal insert fittings utilizing a copper crimp ring for SDR9 cross-linked polyethylene (PEX) tubing and SDR9 polyethylene of raised temperature (PE-RT) tubing |
|
ATS 5200.037.2 |
Technical specification for plumbing and drainage products - part 037.2: flow controllers—for use in heated or cold water plumbing systems |
|
AWWA C606 |
Grooved and Shouldered Joints |
|
BS 1212-1 |
Float operated valves. Specification for piston type float operated valves (copper alloy body) (excluding floats) |
|
BS 1212-2 |
Float operated valves -specification for diaphragm type float operated valves (copper alloy body) (excluding floats) |
|
BS 1212-3 |
Float operated valves -specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats) |
|
BS 1212-4 |
Float operated valves - Part 4: specification for compact type float operated valves for WC flushing cisterns (including floats) |
|
BS 1254 |
Specification for WC seats (plastics) |
|
BS 2782-11: Method 1101A |
Methods of testing plastics - Thermoplastics pipes, fittings and valves - Measurement of dimensions of pipes |
|
BS 5154 |
Specification for copper alloy globe, globe stop and check, check and gate valves |
|
CSA B45.1 |
Ceramic plumbing fixtures |
|
CSA B45.4 |
Stainless steel plumbing fixtures |
|
CSA B45.5 |
Flush valves and spuds for water closets, urinals, and tanks |
|
CSA B45.15 |
Flush valves and spuds for water closets, urinals, and tanks |
|
CSA B125.2 |
Plumbing waste fittings |
|
CSA B125.3 |
Plumbing fittings |
|
CSA B125.6 |
Flexible water connectors |
|
CSA B125.16 |
Performance requirements for automatic compensating valves for individual showers and tub/shower combinations |
|
CSA B137 |
Thermoplastic pressure piping compendium |
|
CSA B1800-18 |
Thermoplastic non-pressure piping compendium |
|
EN 31 |
Pedestal wash basins - connecting dimensions |
|
EN 33 |
WC pans and WC suites -connecting dimensions |
|
EN 35 |
Pedestal and wall-hung bidets with over-rim supply - connecting dimensions |
|
EN 36 |
Wall-hung bidets with over-rim supply - Connecting dimensions |
|
EN 80 |
Wall-hung urinals - connecting dimensions |
|
EN 200 |
Sanitary tapware -single taps and combination taps for water supply systems of type 1 and type 2 -general technical specification |
|
EN 232 |
Baths - connecting dimensions |
|
EN 246 |
Sanitary tapware - General specifications for flow rate regulators |
|
EN 248 |
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
|
EN 274-1 |
Waste fittings for sanitary appliances - requirements |
|
EN 274-2 |
Waste fitting for sanitary appliances - test methods |
|
EN 274-3 |
Waste fittings for sanitary appliances - Part 3: Quality control |
|
EN 593 |
Industrial valves - metallic butterfly valves |
|
EN 598 |
Ductile Iron Pipes, Fittings, Accessories and Their Joints for Sewerage Applications - Requirements and Test Methods |
|
EN 681-1 |
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
|
EN 681-2 |
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
|
EN 816 |
Sanitary tapware - automatic shut-off valves (PN 10) |
|
EN 817 |
Sanitary tapware -mechanical mixing valves (PN 10) - general technical specifications |
|
EN 997 |
WC pans and WC suites with integral trap |
|
EN 1053 |
Plastics piping systems - thermoplastics piping systems for non-pressure applications - test methods for watertightness |
|
EN 1054 |
Plastics piping systems - thermoplastics piping systems for soil and waste discharge - test method for airtightness of joints |
|
EN 1055 |
Plastics piping systems - thermoplastics piping systems for soil and waste discharge inside buildings - test method for resistance to elevated temperature cycling |
|
EN 1074-1 |
Valves for water supply - fitness for purpose requirements and appropriate verification tests - general requirements |
|
EN 1074-2 |
Valves for water supply - fitness for purpose requirements and appropriate verification tests - isolating valves |
|
EN 1111 |
Sanitary tapware - thermostatic mixing valves (PN 10) - general technical specification |
|
EN 1112 |
Sanitary tapware - shower outlets for sanitary tapware for water supply systems type 1 and type 2 - general technical specification |
|
EN 1113 |
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification. |
|
EN 1171 |
Industrial valves - cast iron gate valves |
|
EN 1213 |
Building valves - copper alloy stopvalves for potable water supply in buildings - tests and requirements |
|
EN 1254-2 |
Copper and copper alloys - plumbing fittings - fittings with compression ends for use with copper tubes |
|
EN 1254-3 |
Copper and copper alloys -plumbing fittings - fittings with compression ends for use with plastics pipes |
|
EN 1286 |
Sanitary tapware - low pressure mechanical mixing valves - general technical specification |
|
EN 1287 |
Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications |
|
EN 1717 |
Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow |
|
EN 12259-2 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies |
|
EN 12259-3 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies |
|
EN 12259-5 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors |
|
EN 12288 |
Industrial valves - copper alloy gate valves |
|
EN 12293 |
Plastics piping systems - thermoplastics pipes and fittings for hot and cold water |
|
EN 12294 |
Plastic piping systems - systems for hot and cold water - test method for leaktightness under vacuum |
|
EN 12295 |
Plastics piping systems - thermoplastics pipes and associated fittings for hot and cold water - test method for resistance of joints to pressure cycling |
|
EN 12334 |
Industrial valves - cast iron check valves |
|
EN 12541 |
Sanitary tapware — Pressure flushing valves and automatic closing urinal valves PN 10 |
|
EN 12764 |
Sanitary appliances - Specification for whirlpool baths |
|
EN 13310 |
Kitchen sinks - functional requirements and test methods |
|
EN 13407 |
Wall-hung urinals – Functional requirements and test methods |
|
EN 13618 |
Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
|
EN 13709 |
Industrial valves - steel globe and globe stop and check valves |
|
EN 13789 |
Industrial Valves: Cast Iron Globe Valve. |
|
EN 13828 |
Building valves - manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements |
|
EN 14055 |
WC and urinal flushing cisterns |
|
EN 14124 |
Inlet valves for flushing cisterns with internal overflow |
|
EN 14341 |
Industrial Valves - Steel Check Valves |
|
EN 14428 |
Shower enclosures - functional requirements and test methods |
|
EN 14516 |
Baths for domestic purposes |
|
EN 14527 |
Shower trays for domestic purposes |
|
EN 14528 |
Bidets - functional requirements and test methods |
|
EN 14688 |
Sanitary appliances -wash basins -functional requirements and test methods |
|
EN 15091 |
Sanitary tapware - Electronic opening and closing sanitary tapware. |
|
EN 15200 |
Sanitary appliances - Multifunction shower cabinets |
|
EN 16146 |
Sanitary tapware - extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - general technical specification |
|
GB 18145 |
Ceramic disc cartridge faucet |
|
GB/T 34549 |
Sanitary ware - Smart toilet |
|
IAPMO/ANSI Z124.5 |
Plastic toilet seats |
|
IAPMO/ANSI Z1157 |
Ball valves |
|
IAPMO IGC 186 |
Bathroom accessories |
|
IAPMO IGC 235 |
Wood Type Plumbing Fixtures |
|
IAPMO IGC 299 |
Ring Gaskets for Water Closet and Urinal Outlets |
|
IAPMO PS 50 |
Flush valves with dual flush device for water closets or water closet tank with an integral flush valves with a dual flush device |
|
IAPMO Z124 |
Plastic Plumbing Fixtures |
|
ISO 1133-1 |
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method |
|
ISO 2505 |
Thermoplastics pipes - longitudinal reversion - test methods and parameters |
|
ISO 3126 |
Plastics piping systems - Plastics components - Determination of dimensions |
|
ISO 3501 |
Plastics piping systems - mechanical joints between fittings and pressure pipes |
|
ISO 3503 |
Plastics piping systems - mechanical joints between fittings and pressure pipes |
|
ISO 4427-1 |
Plastics piping systems - polyethylene (PE) pipes and fittings for water supply part 1: general |
|
ISO 4427-2 |
Plastics piping systems - polyethylene (PE) pipes and fittings for water supply part 2: pipes |
|
ISO 4427-3 |
Plastics piping systems - polyethylene (PE) pipes and fittings for water supply part 3: fittings |
|
ISO 4427-5 |
Plastics piping systems - polyethylene (PE) pipes and fittings for water supply part 5: fitness for purpose of the system |
|
ISO 4437-1 |
Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) – part 1: Genera |
|
ISO 4437-2 |
Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) – part 2: pipes |
|
ISO 4437-3 |
Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) – part 3: fittings |
|
ISO 4437-4 |
Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) – part 4: valves |
|
ISO 4437-5 |
Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) – part5: fitness for purpose of the system |
|
ISO 5208 |
Industrial valves - pressure testing of metallic valves |
|
ISO 6509-1 |
Corrosion of Metals and Alloys - Determination of Dezincification Resistance of Brass |
|
ISO 6957 |
Copper Alloys - Ammonia Test for Stress Corrosion Resistance |
|
ISO 6964 |
Polyolefin pipes and fittings - Determination of carbon black content by calcination and pyrolysis - Test method |
|
ISO 9080 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
|
ISO 11357-6 |
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (Dynamic OIT) |
|
ISO 13480 |
Polyethylene Pipes - Resistance to Slow Crack Growth - Cone Test Method |
|
ISO 15874-1 |
Plastics piping systems for hot and cold water installations - polypropylene (PP) |
|
ISO 15874-2 |
Plastics piping systems for hot and cold water installations - polypropylene (PP) |
|
ISO 15874-3 |
Plastics piping systems for hot and cold water installations - polypropylene (PP) |
|
ISO 15874-5 |
Plastics piping systems for hot and cold water installations - polypropylene (PP) |
|
ISO 15875-1 |
Plastics piping systems for hot and cold water installations -crosslinked polyethylene (PE-X) – part 1:general |
|
ISO 15875-2 |
Plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - part 2: pipes |
|
ISO 15875-3 |
Plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - part 3: fittings |
|
ISO 15875-5 |
Plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - part 5: fitness for purpose of the system |
|
ISO 17885 |
Plastic piping systems - Mechanical fittings for pressure piping system - Specification |
|
ISO 22391-1 |
Plastics piping systems for hot and cold water installations - polyethylene of raised temperature resistance (PE-RT) – part 1: general |
|
ISO 22391-2 |
Plastics piping systems for hot and cold water installations - polyethylene of raised temperature resistance (PE-RT) - part 2: pipes |
|
ISO 22391-3 |
Plastics piping systems for hot and cold water installations - polyethylene of raised temperature resistance (PE-RT) - part 3: fittings |
|
ISO 22391-5 |
Plastics piping systems for hot and cold water installations - polyethylene of raised temperature resistance (PE-RT) - part 5: fitness for purpose of the system |
|
LPS 1226 |
Loss Prevention Standard - Tests on Pressure Switches |
|
MaP 01 |
Maximum Performance (MaP) Testing Protocol for Toilet Fixture Performance |
|
MS 147 |
Specification for quality of vitreous china sanitary appliances |
|
MS 628-2 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 2: Pipes (ISO 1452-3 Mod) |
|
MS 628-3 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3 Mod) |
|
MS 795-1 |
WC flushing cisterns - part 1: specification (exclusion Section 4.2.2.2: Color fastness to light for exposed cistern only |
|
MS 795-2 |
WC flushing cisterns - part 2: inlet valves |
|
MS 795-3 |
WC flushing cisterns - part 3: flushing device |
|
MS 1058-2 |
Polyethylene (PE) piping systems for water supply - Part 2: Pipes |
|
MS 1058-3 |
Polyethylene (PE) piping systems for water supply - Part 3: Fittings |
|
MS 1061-1 |
Vitrified Clay Pipes and Fittings and Pipes Joints for Drains and Sewers. - Part 1: Requirement |
|
MS 1210-1 |
Specification for Fire Hydrant Systems Equipment - Part 1: Landing Valves for Wet Risers |
|
MS 1210-2 |
Specification for Fire Hydrant Systems Equipment - Part 2: Landing Valves for Dry Risers |
|
MS 1419-1 |
Acrylonitrile-Butadiene Styrene (ABS) Piping Systems for Pressure Applications |
|
MS 1522 |
Specification for vitreous china water closet pans |
|
MS 1736-2 |
Plastics piping systems for hot and cold water installations - Crosslinked Polyethylene (PE-X) - Part 3: Pipes |
|
MS 1736-3 |
Plastics piping systems for hot and cold water installations - Crosslinked Polyethylene (PE-X) - Part 3: Fittings |
|
MS 1799 |
Urinals - Specification |
|
MS 1882 |
Piston Type Float Operated Valves - Specification |
|
MS 1919 |
Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water Pipelines - Requirements and Test Method |
|
MS 2286-2 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 2: Pipes (ISO 15874-2 MOD) |
|
MS 2286-3 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) |
|
MS 2495 |
Pipework - Stainless Steel Fittings Threaded in Accordance with MS 1989: Part 1 |
|
MS 2508-2 |
Plastics Piping Systems for Hot and Cold Water Installations - – Polyethylene of Raised Temperature Resistance (PE-RT) - Part 2: Pipe |
|
MS 2508-3 |
Plastics Piping Systems for Hot and Cold Water Installations - – Polyethylene of Raised Temperature Resistance (PE-RT) - Part 3: Fittings |
|
MS 2545 |
Flush Valve: Specification |
|
MS 2578 |
Ceramic wash basins - Specification |
|
MS ISO 13006 |
Ceramic Tiles – Definitions, Classification, Characteristics and Marking |
|
MSS SP-80 |
Bronze gate, globe, angle, and check valves |
|
MSS SP 110 |
Ball valves threaded, socket-welding, solder joint, grooved and flared ends |
|
NSF/ANSI 61 |
Drinking Water System Components - Health Effects |
|
NSF/ANSI 372 |
Drinking Water System Components - Lead Content |
|
PNS 14 |
uPVC rigid electrical conduit |
|
PNS 26 |
Steel Pipes (BI/GI) |
|
PNS 34 |
Rubber inner tubes |
|
PNS 65 |
Pipes (uPVC) for potable water supply |
|
PNS 152 |
Pipes (PB) |
|
PNS 156 |
Sanitary Wares |
|
PNS 1950 |
PVC-U pipes for drain waste & vent |
|
PNS 2085 |
Sanitary Wares |
|
SASO 1024 |
Ceramic sanitary appliances - Methods of test for general requirements |
|
SASO 1025 |
Ceramic Sanitary Appliances - General requirements |
|
SASO 1257 |
Sanitary Appliances - Flushing Water Tanks |
|
SASO 1258 |
Ceramic Sanitary Appliances Eastern Water Closets and Traps |
|
SASO 1259 |
Ceramic sanitary appliances - Methods of test for eastern water closets |
|
SASO 1473 |
Ceramic sanitary appliances - western water closets |
|
SASO 1474 |
Ceramic sanitary appliances — methods of test for western water closets |
|
SASO 1475 |
Bidets - Functional requirements and test methods |
|
SASO 1476 |
Ceramic sanitary appliances - washbasins |
|
SASO 1477 |
Sanitary Appliances - Pressurized Flushing Devices |
|
SASO 1478 |
Sanitary appliances - Methods of test for pressurized flushing devices |
|
SASO 1479 |
Sanitary appliances - Methods of test for flushing water tanks |
|
SASO 1480 |
Sanitary appliances – flushing apparatus |
|
SASO 1481 |
Sanitary appliances – method of test for flushing apparatus |
|
SASO 1913 |
Sanitary appliances-tapware: shower and spray hoses |
|
SASO 1914 |
Sanitary appliances - tapware: methods of test for shower and spray hoses |
|
SASO 2655 |
Sanitary ware: general requirements for spare sanitary wares |
|
SASO 2656 |
Sanitary appliances: method of test for plumbing fixture fittings |
|
SASO 2854 |
Plastic Toilet Seat and Cover |
|
SASO 2895 |
Roof, deck, and balcony drains |
|
SASO 2896 |
Floor and trench drains |
|
SASO 2897 |
Cleanouts |
|
SASO 2922 |
Western water closets equipped with a dual flushing device |
|
SASO-GSO-2444 |
Test Method for Plastic Toilet Seat and Cover |
|
SIRIM 9 |
Thermoplastic Stopvalves for Potable Water Supply in Buildings |
|
SPAN TS 3004 |
Water Taps – Single Taps and Combination Taps - Specification |
|
SPAN TS 3005 |
Shower Outlet for Sanitary Tapware for Water Supply System - Specification |
|
SS 448-1 |
Performance of draw-off taps with metal or plastic bodies for water services - dimensional and design characteristics |
|
SS 448-2 |
Performance of draw-off taps with metal or plastic bodies for water services - water tightness and pressure resistance characteristics |
|
SS 448-3 |
Performance of draw-off taps with metal or plastic bodies for water services - hydraulic characteristics |
|
SS 448-4 |
Performance of draw-off taps with metal or plastic bodies for water services - mechanical and endurance characteristics |
|
SS 448-5 |
Performance of draw-off taps with metal or plastic bodies for water services - physio-chemical characteristics: Materials, coatings |
|
WaterSense 01 |
High-Efficiency Lavatory Faucet Specification |
|
WaterSense 02 |
WaterSense Specification for Showerheads |
|
WaterSense 03 |
WaterSense Specification for Tank-Type Toilets |
|
WaterSense 04 |
WaterSense Specification for Flushing Urinals |
|
WMTS-012 |
WaterMark Technical Specification for In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
|
WMTS-030 |
WaterMark Technical Specification for Solenoid valves |
|
WMTS-037.1 |
WaterMark Technical Specification for Flow controllers – For controlling flows in cold or heated water systems |
|
WMTS-040 |
WaterMark Technical Specification for Waste pipe connection outlets and gratings, separate or integral |
|
WMTS-050 |
Prefabricated modules |
|
WMTS-051 |
WaterMark Technical Specification for Bidet douche seats |
|
WMTS-101 |
WaterMark Technical Specification for Appliances (low hazard rating) |
|
WMTS-103 |
WaterMark Technical Specification for Water treatment systems (other than those specified in AS/NZS 3497) |
|
WMTS-105 |
WaterMark Technical Specification for Appliances - Beverage dispensers and icemakers, only Section 9 and Appendix A |
|
WMTS-469 |
Waterless or limited flush urinals – With an integral sealing device |
|
WMTS-485 |
WaterMark Technical Specification for Pressure compensating tank |