美国
|
Tests by Method |
|
|
Method |
Test Description |
|
ASTM D86 Modified |
Distillation by Gas Chromatograph |
|
ASTM D92 |
Fire Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point and Fire Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point, Grease |
|
ASTM D93 |
Flash Point, Pensky-Martins Closed Cup |
|
ASTM D94 |
Saponification Number |
|
ASTM D97 |
Pour Point |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D156 |
Color (Saybolt Chromometer Method) |
|
ASTM D189 |
Carbon Residue, Conradson |
|
ASTM D217 |
Cone Penetration, Grease, Unworked |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 60 Strokes |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 10,000 Strokes |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 100,000 Strokes |
|
ASTM D240 |
Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) |
|
ASTM D287 |
API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) |
|
ASTM D323 |
Reid Vapor Pressure |
|
ASTM D381 |
Gum Content of Gasoline (Washed and Unwashed) |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, Below 0°C |
|
ASTM D445 |
Kinematic Viscosity, Used or In-Service Oil |
|
ASTM D482 |
Total Ash |
|
ASTM D524 |
Carbon Residue, Ramsbottom |
|
ASTM D525 |
Oxidation Stability (Gasoline) |
|
ASTM D566 |
Dropping Point Grease |
|
ASTM D611 |
Aniline Point |
|
ASTM D613 |
Cetane Number |
|
ASTM D664 |
Acid Number |
|
ASTM D665 |
Rust Prevention 4 Hours (Method A or B) |
|
ASTM D665 |
Rust Prevention 24 Hours (Method A or B) |
|
ASTM D874 |
Sulfated Ash |
|
ASTM D877 |
Dielectric Breakdown Voltage |
|
ASTM D892 |
Foaming, Sequence I - III (Specify Option A if Required) |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify Option A if Required) |
|
ASTM D893 |
Insolubles, Pentane |
|
ASTM D924 |
Dissipation/Power Factor |
|
ASTM D942 |
Oxidation Stability (Grease) 100 Hours |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 1000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 2000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 3000 Hours) |
|
ASTM D972 |
Evaporation Loss (Grease) - Specify Time and Temperature |
|
ASTM D974 |
Acid Number |
|
ASTM D974 |
Base Number |
|
ASTM D976 & D4737 |
Cetane Index (Calculated from D1298 and D86) |
|
ASTM D1084 B |
T-Bar Viscosity |
|
ASTM D1092 |
Apparent Viscosity, Grease |
|
ASTM D1120 |
Boiling Point of Coolants |
|
ASTM D1177 |
Freeze Point |
|
ASTM D1218 |
Refractive Index |
|
ASTM D1264 |
Water Washout (Single Bearing/Single Temperature) |
|
ASTM D1264 |
Water Washout (Two Bearings Per Method/Single Temperature) |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D1319 |
Hydrocarbon Type |
|
ASTM D1331 |
Surface Tension |
|
ASTM D1401 |
Emulsion Characteristics, Water Separability |
|
ASTM D1403 |
Cone Penetration, 1/4 or 1/2 Scale |
|
ASTM D1404 |
Harmful Particles in Grease |
|
ASTM D1478 |
Low Temperature Torque |
|
ASTM D1500 |
Color |
|
ASTM D1533 |
Water in Insulating Liquids by Coulometric Karl Fischer Titration |
|
ASTM D1662 |
Sulfur, Active |
|
ASTM D1742 |
Oil Separation, Storage of Greases |
|
ASTM D1743 |
Rust Prevention Properties of Grease |
|
ASTM D1748 |
Rust Protection by Humidity Cabinet |
|
ASTM D1768 |
Water and Sediment for Opaque or In-Service Oils |
|
ASTM D1831 |
Roll Stability of Grease |
|
ASTM D1957 |
Hydroxyl Number |
|
ASTM D2007 |
Clay Gel Analysis |
|
ASTM D2008 |
UV Absorbance to Absorptivity |
|
ASTM D2070 |
Thermal Stability (Hydraulic Fluids) |
|
ASTM D2112 |
Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C |
|
ASTM D2155 |
Auto-Ignition Temperature (Hydraulic Fluids) |
|
ASTM D2265 |
Dropping Point |
|
ASTM D2266 |
Four Ball Wear (Grease) |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C and 100°C) |
|
ASTM D2272 |
Rotating Bomb Oxidation Test (RBOT) Single Run |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run |
|
ASTM D2272 |
RPVOT, Run to End-of-Test, Hard Break |
|
ASTM D2273 |
Trace Sediment |
|
ASTM D2274 |
Oxidation Stability (Petroleum Fuel Oil) |
|
ASTM D2369 |
Volatile Organic Content (VOC) |
|
ASTM D2500 |
Cloud Point |
|
ASTM D2509 |
Timken OK Load for Grease (Specify Starting Load) |
|
ASTM D2532 |
Viscosity Stability at Low Temperature |
|
ASTM D2595 |
Evaporation Loss, Grease, Wide Temperature Range |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Up to 400 kg |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Above 400 kg |
|
ASTM D2603 |
Sonic Shear, Oils |
|
ASTM D2619 |
Hydrolytic Stability |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2670 |
Falex Pin & Vee Wear |
|
ASTM D2699 |
Octane Number (Research Rating) |
|
ASTM D2700 |
Octane Number (Motor Rating) |
|
ASTM D2709 |
Water and Sediment |
|
ASTM D2711 |
Demulsibility - Procedure A (No EP Additives) |
|
ASTM D2711 |
Demulsibility - Procedure B (Contains EP Additives) |
|
ASTM D2714 |
Block on Ring Friction and Wear |
|
ASTM D2717 |
Thermal Conductivity - Single Temperature |
|
ASTM D2782 |
Timken Extreme Pressure (Specify Starting Load) |
|
ASTM D2783 |
Four Ball Extreme Pressure Up to 400 kg. |
|
ASTM D2783 |
Four Ball Extreme Pressure Above 400 kg. |
|
ASTM D2879 |
Vapor Pressure by Isoteniscope, Single Temperature |
|
ASTM D2879 |
Vapor Pressure by Isoteniscope, Multiple Temperatures |
|
ASTM D2887 |
Gas Chromatography - Carbon Distribution Extended |
|
ASTM D2893 |
Oxidation Characteristics Extreme Pressure |
|
ASTM D2896 |
Base Number |
|
ASTM D2982 |
Glycol-Base Antifreeze in Used Oils |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D3233 |
Falex Extreme Pressure |
|
ASTM D3238 |
Carbon Distribution Analysis |
|
ASTM D3336 |
High Temperature Bearing Performance Up to 600 Hours |
|
ASTM D3427 |
Air Release, Gas Bubble Separation |
|
ASTM D3520 |
Quenching Time |
|
ASTM D3524 |
Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) |
|
ASTM D3525 |
Fuel Dilution, Gasoline |
|
ASTM D3527 |
High Temperature Life, Wheel Bearing Grease |
|
ASTM D3703 |
Peroxide Value |
|
ASTM D3704 |
Oscillation Friction Wear, Grease |
|
ASTM D3829 |
Mini-Rotary Viscosity (MRV), Single Temperature |
|
ASTM D4048 |
Copper Strip Corrosion, Grease |
|
ASTM D4049 |
Resistance of Lubricating Grease to Water Spray |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM D4170 |
Fretting Wear, Grease |
|
ASTM D4172 |
Four Ball Wear |
|
ASTM D4287 |
High-Shear Viscosity Using a Cone/Plate Viscometer |
|
ASTM D4289 |
Elastomer Compatibility NBR L and CR Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L or CR Grease |
|
ASTM D4289 |
Elastomer Compatibility HPM Elastomer |
|
ASTM D4290 |
Leakage of Wheel Bearing Grease |
|
ASTM D4291 |
Glycol |
|
ASTM D4294 |
Sulfur by XRF - Energy Dispersive |
|
ASTM D4310 |
Sludging & Corrosion Tendency Up to 1000 Hours |
|
ASTM D4530 |
Carbon Residue, Micro |
|
ASTM D4629 |
Nitrogen by Chemiluminescence |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, Used Oil |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Other Shear, Other Tem-perature |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Below 50°C |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D4693 |
Low Temperature Torque, Wheel Bearing Grease |
|
ASTM D4737 |
Cetane Index (Calculated from D1298 and D86) |
|
ASTM D4739 |
Base Number |
|
ASTM D4742 |
Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils |
|
ASTM D4927 |
Sulfur Content for Automatic Transmission Fluid by XRF |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D5133 |
Gelation Index |
|
ASTM D5133 |
Scanning Brookfield Viscosity (-5°C to -40°C) |
|
ASTM D5133 |
Scanning Brookfield Viscosity, Extended Temperature Range |
|
ASTM D5182 |
FZG Gear Test - Up to 12 Stages |
|
ASTM D5182 |
FZG Gear Test - Up to 14 Stages |
|
ASTM D5183 |
Coefficient of Friction by Four Ball |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5185 |
Sulfur by Elemental Analysis by Inductively Coupled Plasma |
|
ASTM D5186 |
Aromatics in Diesel Fuel |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 20 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 30 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 40 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), Other Passes |
|
ASTM D5291 |
Carbon, Hydrogen and Nitrogen Content |
|
ASTM D5291 |
Nitrogen - Carlo Erba |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5293 Mod. |
Cold Cranking Simulator, Temperature Scan |
|
ASTM D5453 |
Sulfur |
|
ASTM D5453 & D5762 |
Sulfur and Nitrogen Package |
|
ASTM D5483 |
Oxidation Stability of Greases by PDSC |
|
ASTM D5554 |
Iodine Value |
|
ASTM D5620 |
Drain and Dry Mode Using Falex Pin & Vee Block Test Machine |
|
ASTM D5621 |
Sonic Shear, Hydraulic Fluids |
|
ASTM D5706 |
Extreme Pressure Properties using SRV, Procedure A |
|
ASTM D5706 |
Extreme Pressure Properties using SRV, Procedure B |
|
ASTM D5707 |
Friction and Wear Properties using SRV |
|
ASTM D5762 |
Nitrogen |
|
ASTM D5769 |
Benzene, Toluene, Total Aromatics by GC/MS |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D5827 |
Sulfate Analysis (SO4) |
|
ASTM D5853 |
Pour Point for Crude Oils |
|
ASTM D5969 |
Corrosion-Preventive, Dilute Synthetic Sea Water Environments |
|
ASTM D5972 |
Freeze Point |
|
ASTM D6022 |
Calculated Permanent Shear Stability Index |
|
ASTM D6079 |
Lubricity by HFRR |
|
ASTM D6082 |
Foaming, Sequence IV (Specify Option A if Required) |
|
ASTM D6130 |
Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test - 2 Bearings) |
|
ASTM D6184 |
Oil Separation Percent, Wire Cone Method |
|
ASTM D6185 |
Compatibility of Two Greases |
|
ASTM D6186 |
Oxidation Induction Time by PDSC |
|
ASTM D6200 |
Cooling Curve Analysis of Quench Oils |
|
ASTM D6217 |
Particulate Contamination for Diesel Fuels |
|
ASTM D6278 |
Kurt Orbahn Shear Stability, 30 Passes |
|
ASTM D6278 Mod. |
Kurt Orbahn Shear Stability, 100 Passes |
|
ASTM D6278 Mod. |
Kurt Orbahn Shear Stability, Custom Number of Passes |
|
ASTM D6278 Mod. |
Kurt Orbahn Shear Stability, 90 Passes |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6335 |
Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) |
|
ASTM D6371 |
Cold Filter Plug Point |
|
ASTM D6375 |
Noack Volatility by TGA |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D6425 |
Friction and Wear Properties of Extreme Pressure (EP) Using SRV |
|
ASTM D6443 |
Chlorine by XRF |
|
ASTM D6557 |
Ball Rust Test |
|
ASTM D6560 |
Asphaltene Content |
|
ASTM D6594 |
High Temperature Corrosion Bench Test at 135°C |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, New Oil |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Other Shear |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Used Oil |
|
ASTM D6793 |
Bulk Modulus, Up to 80°C |
|
ASTM D6794 |
Engine Oil Water Tolerance (EOWT) |
|
ASTM D6795 |
Engine Oil Filterability (EOFT) |
|
ASTM D6922 |
Homogeneity & Miscibility |
|
ASTM D7097 |
Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) |
|
ASTM D7098 |
Thin Film Oxygen Uptake Test (TFOUT) Catalyst B |
|
ASTM D7109 |
Kurt Orbahn Shear Stability - Includes 30 and 90 Passes |
|
ASTM D7213 |
Boiling Range Distribution of Petroleum Distillates (100°C to 615°C) |
|
ASTM D7214 |
FTIR Analysis, Oxidation by Peak Area Increase |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
HDD Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
HDD Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
HDD Elastomer Compatibility, MAC, Vamac |
|
ASTM D7216 |
HDD Elastomer Compatibility, NBR, Nitrile |
|
ASTM D7216 |
HDD Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7217 |
Extreme Pressure Properties of Solid Bonded Films Using a High-Fre-quency, Linear-Oscillation SRV |
|
ASTM D7317 |
Pentane Insolubles by Filtration |
|
ASTM D7321 |
Particulate Contamination for Biodiesel Fuels |
|
ASTM D7371 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
ASTM D7412 |
FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear |
|
ASTM D7414 |
FTIR Analysis, In-Service Fluid, Oxidation |
|
ASTM D7415 |
FTIR Analysis, In-Service Fluid, Sulfate Content |
|
ASTM D7420 |
Tribomechanical Properties of Grease Lubricated Plastic Socket Suspen-sion Joints Using a High-Frequency, Linear-Oscillation SRV |
|
ASTM D7421 |
Extreme Pressure Properties of Lubricating Oils Using High-Frequency,Linear-Oscillation SRV |
|
ASTM D7462 |
Oxidation Stability (Biodiesel) |
|
ASTM D7462 |
Oxidation Stability (Biodiesel - B100 Option) |
|
ASTM D7563 |
Emulsion of Water and Simulated Ed85 Fuel |
|
ASTM D7594 |
Fretting Wear, High Hertzian, High-Frequency, Linear-Oscillation (SRV) |
|
ASTM D7619/ISO 4406 |
Particle Count and Sizing |
|
ASTM D7624 |
FTIR Analysis, In-Service Fluid, Nitration |
|
ASTM D7844 |
FTIR Analysis, In-Service Fluid, Soot |
|
ASTM D8022 |
Roll Stability, Presence of Water |
|
ASTM D8447 |
Thermo-oxidation Engine Oil Simulation Test (TURBO) |
|
ASTM E659 |
Auto-Ignition Temperature, Liquid Chemicals |
|
ASTM E1131 |
TGA Soot |
|
ASTM E1269 |
Specific Heat |
|
ASTM E1269 & E1133 |
Specific Heat and TGA for Fluids |
|
ASTM E1858 |
Oxidation Induction Time by PDSC |
|
ASTM E2412 |
FTIR Analysis, In-Service Fluid |
|
ASTM G 99 |
Wear Testing with a Pin-on-Disk Apparatus |
|
CEC L-036-90 Modified |
High Temperature High Shear Viscosity, 150°C, New Oil |
|
CEC L-036-90 Modified |
High Temperature High Shear Viscosity, 150°C, Used Oil |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 04 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 08 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 20 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 30 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 40 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D445 |
KRL Shear Custom Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 04 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 08 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 20 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 30 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 40 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear Custom Hours + pre & post shear VI |
|
CEC L-48 |
Oxidation Stability of Lubricating Oils by Artificial Aging |
|
CEC L-085-T99 |
Oxidation Induction Time by PDSC |
|
CEC L-105 |
ACEA Low Temperature Pumpability |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 216 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 216 Hours |
|
CEC L-112 |
Elastomer Compatibility, RE6 FKM |
|
CEC L-112 |
Elastomer Compatibility, RE7 ACM |
|
CEC L-112 |
Elastomer Compatibility, RE8 HNBR |
|
CEC L-112 |
Elastomer Compatibility, RE9 AEM |
|
DIN 50324 |
Tribological Test - Friction and Wear Model Test for Sliding Friction of Solids (Ball on Disc System) |
|
DIN 51805 |
Flow Pressure, Kesternich Method |
|
DIN 51834 |
Tribological Test - Translatory Oscillation Apparatus - Part 2: Determina-tion of Friction and Wear Data for Lubricating Oils |
|
DIN ISO 7148-1 |
Tribological Test - Metallic Bearing Materials for Plain Bearings Under Conditions of Boundary Lubrication |
|
DIN ISO 7148-2 |
Tribological Test - Polymer-Based Plain Bearing Materials Under Speci-fied Working Conditions |
|
EN 14078 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
EN 14112 |
Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat |
|
EN 15751 |
Oxidation Stability (Bio-based FAME Only) Rancimat |
|
EPA Test 24 |
Volatile Organic Content (VOC) |
|
FTM 203C |
Stable Pour Point |
|
FTM 3005 |
Dirt Count of Grease |
|
FTM 321 |
Oil Separation, Wire Cone Method, Grease |
|
FTM 3456 |
Channeling Characteristics |
|
IP 346 |
PCA - Polycyclic Analysis |
|
ISO 1817 |
Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, HNBR, 1000 Hours |
|
ISO 4406 |
Particle Count |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, AU, 1000 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, FKM2, 1000 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, NBR1, 1000 Hours |
|
ISO 14635-1 |
FZG Gear Test |
|
ISO 14635-2 |
FZG Gear Test (A10/16.6R/30 or A10/16.6R/90) Custom |
|
ISO 14635-3 |
FZG Gear Test, Grease |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, NBR2, 1000 Hours |
|
NACE TM0172 |
Corrosive Properties of Cargoes in Petroleum Product Pipelines |
|
SAEJ1703 COM |
Compatibility |
|
SAEJ1703 COR |
Corrosion Test |
|
SAEJ1703 CS |
Chemical Stability |
|
SAEJ1703 ERBP |
Equilibrium Reflux Boiling Point |
|
SAEJ1703 ESBR |
Effect on SBR Cups |
|
SAEJ1703 HTS |
High Temperature Stability |
|
SAEJ1703 LTF |
Fluidity At Low Temperature |
|
SAEJ1703 OR |
Oxidation Resistance |
|
SAEJ1703 pH |
pH Determination |
|
SAEJ1703 WERBP |
Wet Equilibrium Reflux Boiling Point |
|
SAEJ1703 WTT |
Water Tolerance |
|
SAVLAB APP |
Appearance |
|
SAVLAB CAP |
Cone & Plate Viscosity |
|
SAVLAB EV-CDT |
Conductive Deposit Test |
|
SAVLAB EV-WCT |
Wire Corrosion Test |
|
SAVLAB FEI |
Fuel Efficiency Index (FEI) |
|
SAVLAB GES |
GE Locomotive Specification (GE Package 1, B82-1 test) |
|
SAVLAB IR |
Fourier Transform Infra-Red, FTIR, Spectra Only |
|
SAVLAB IRG |
Fourier Transform Infra-Red, FTIR, Glycol Analysis |
|
SAVLAB IRW |
Fourier Transform Infra-Red, FTIR, Water Analysis |
|
SAVLAB LINPUMP |
Lincoln Vent Meter Pumpability, Room Temperature |
|
SAVLAB LINPUMP |
Lincoln Vent Meter Pumpability, Below 0ºC |
|
SAVLAB LPYC |
Density, Pycnometer |
|
SAVLAB MIC |
Microscopy |
|
SAVLAB PEI |
Phosphorus Emissions Index (PEI) at 250ºC, 1 Hour |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 16 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 32 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 48 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 64 Hours |
|
SAVLAB PH |
pH Determination |
|
SAVLAB RBP |
Reflux Boiling Point |
|
SAVLAB SEI |
Sulfur Emissions Index, (SEI) |
|
SAVLAB SFACALC |
Sulfated Ash, Calculated from ICP Results |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, New Oil |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Shear |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Temperature |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Used Oil |
|
SAVLAB TGASCAN |
TGA Thermal Scan or Isotherm |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 20, 30 or 40 Passes |
|
SAVLAB WHAT |
Fuel Additive Water Uptake |
|
US Steel LT-37 |
Grease Mobility |
|
Tests in Alphabetical Order |
|
|
CEC L-105 |
ACEA Low Temperature Pumpability |
|
ASTM D664 |
Acid Number |
|
ASTM D974 |
Acid Number |
|
ASTM D3427 |
Air Release, Gas Bubble Separation |
|
ASTM D611 |
Aniline Point |
|
ASTM D287 |
API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) |
|
ASTM D1092 |
Apparent Viscosity, Grease |
|
SAVLAB APP |
Appearance |
|
ASTM D5186 |
Aromatics in Diesel Fuel |
|
ASTM D6560 |
Asphaltene Content |
|
ASTM D2155 |
Auto-Ignition Temperature (Hydraulic Fluids) |
|
ASTM E659 |
Auto-Ignition Temperature, Liquid Chemicals |
|
ASTM D6557 |
Ball Rust Test |
|
ASTM D974 |
Base Number |
|
ASTM D2896 |
Base Number |
|
ASTM D4739 |
Base Number |
|
ASTM D5769 |
Benzene, Toluene, Total Aromatics by GC/MS |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 216 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 216 Hours |
|
ASTM D2714 |
Block on Ring Friction and Wear |
|
ASTM D1120 |
Boiling Point of Coolants |
|
ASTM D7213 |
Boiling Range Distribution of Petroleum Distillates (100°C to 615°C) |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D6793 |
Bulk Modulus, Up to 80°C |
|
ASTM D6022 |
Calculated Permanent Shear Stability Index |
|
ASTM D3238 |
Carbon Distribution Analysis |
|
ASTM D189 |
Carbon Residue, Conradson |
|
ASTM D4530 |
Carbon Residue, Micro |
|
ASTM D524 |
Carbon Residue, Ramsbottom |
|
ASTM D5291 |
Carbon, Hydrogen and Nitrogen Content |
|
ASTM D976 & D4737 |
Cetane Index (Calculated from D1298 and D86) |
|
ASTM D4737 |
Cetane Index (Calculated from D1298 and D86) |
|
ASTM D613 |
Cetane Number |
|
FTM 3456 |
Channeling Characteristics |
|
SAEJ1703 CS |
Chemical Stability |
|
ASTM D6443 |
Chlorine by XRF |
|
ASTM D2007 |
Clay Gel Analysis |
|
ASTM D2500 |
Cloud Point |
|
ASTM D5183 |
Coefficient of Friction by Four Ball |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5293 Mod. |
Cold Cranking Simulator, Temperature Scan |
|
ASTM D6371 |
Cold Filter Plug Point |
|
ASTM D1500 |
Color |
|
ASTM D156 |
Color (Saybolt Chromometer Method) |
|
SAEJ1703 COM |
Compatibility |
|
ASTM D6185 |
Compatibility of Two Greases |
|
SAVLAB EV-CDT |
Conductive Deposit Test |
|
SAVLAB CAP |
Cone & Plate Viscosity |
|
ASTM D1403 |
Cone Penetration, 1/4 or 1/2 Scale |
|
ASTM D217 |
Cone Penetration, Grease, Unworked |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 60 Strokes |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 10,000 Strokes |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 100,000 Strokes |
|
ASTM D6200 |
Cooling Curve Analysis of Quench Oils |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D4048 |
Copper Strip Corrosion, Grease |
|
SAEJ1703 COR |
Corrosion Test |
|
ASTM D5969 |
Corrosion-Preventive, Dilute Synthetic Sea Water Environments |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test - 2 Bearings) |
|
NACE TM0172 |
Corrosive Properties of Cargoes in Petroleum Product Pipelines |
|
ASTM D2711 |
Demulsibility - Procedure A (No EP Additives) |
|
ASTM D2711 |
Demulsibility - Procedure B (Contains EP Additives) |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
SAVLAB LPYC |
Density, Pycnometer |
|
ASTM D877 |
Dielectric Breakdown Voltage |
|
FTM 3005 |
Dirt Count of Grease |
|
ASTM D924 |
Dissipation/Power Factor |
|
ASTM D86 Modified |
Distillation by Gas Chromatograph |
|
ASTM D5620 |
Drain and Dry Mode Using Falex Pin & Vee Block Test Machine |
|
ASTM D2265 |
Dropping Point |
|
ASTM D566 |
Dropping Point Grease |
|
SAEJ1703 ESBR |
Effect on SBR Cups |
|
ASTM D4289 |
Elastomer Compatibility HPM Elastomer |
|
ASTM D4289 |
Elastomer Compatibility NBR L and CR Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L or CR Grease |
|
ISO 1817 |
Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, AU, 1000 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, FKM2, 1000 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, HNBR, 1000 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, NBR1, 1000 Hours |
|
ISO 6072 |
Elastomer Compatibility, Hydraulic Fluid, NBR2, 1000 Hours |
|
CEC L-112 |
Elastomer Compatibility, RE6 FKM |
|
CEC L-112 |
Elastomer Compatibility, RE7 ACM |
|
CEC L-112 |
Elastomer Compatibility, RE8 HNBR |
|
CEC L-112 |
Elastomer Compatibility, RE9 AEM |
|
ASTM D6130 |
Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D1401 |
Emulsion Characteristics, Water Separability |
|
ASTM D7563 |
Emulsion of Water and Simulated Ed85 Fuel |
|
ASTM D6795 |
Engine Oil Filterability (EOFT) |
|
ASTM D6794 |
Engine Oil Water Tolerance (EOWT) |
|
SAEJ1703 ERBP |
Equilibrium Reflux Boiling Point |
|
ASTM D972 |
Evaporation Loss (Grease) - Specify Time and Temperature |
|
ASTM D2595 |
Evaporation Loss, Grease, Wide Temperature Range |
|
ASTM D7421 |
Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Lin-ear-Oscillation SRV |
|
ASTM D7217 |
Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency,Linear-Oscillation SRV |
|
ASTM D5706 |
Extreme Pressure Properties using SRV, Procedure A |
|
ASTM D5706 |
Extreme Pressure Properties using SRV, Procedure B |
|
ASTM D3233 |
Falex Extreme Pressure |
|
ASTM D2670 |
Falex Pin & Vee Wear |
|
ASTM D7371 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
EN 14078 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
ASTM D92 |
Fire Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point and Fire Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point, Grease |
|
ASTM D93 |
Flash Point, Pensky-Martins Closed Cup |
|
DIN 51805 |
Flow Pressure, Kesternich Method |
|
SAEJ1703 LTF |
Fluidity At Low Temperature |
|
ASTM D892 |
Foaming, Sequence I - III (Specify Option A if Required) |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify Option A if Required) |
|
ASTM D6082 |
Foaming, Sequence IV (Specify Option A if Required) |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Above 400 kg |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Up to 400 kg |
|
ASTM D2783 |
Four Ball Extreme Pressure Above 400 kg. |
|
ASTM D2783 |
Four Ball Extreme Pressure Up to 400 kg. |
|
ASTM D4172 |
Four Ball Wear |
|
ASTM D2266 |
Four Ball Wear (Grease) |
|
SAVLAB IRG |
Fourier Transform Infra-Red, FTIR, Glycol Analysis |
|
SAVLAB IR |
Fourier Transform Infra-Red, FTIR, Spectra Only |
|
SAVLAB IRW |
Fourier Transform Infra-Red, FTIR, Water Analysis |
|
ASTM D1177 |
Freeze Point |
|
ASTM D5972 |
Freeze Point |
|
ASTM D4170 |
Fretting Wear, Grease |
|
ASTM D7594 |
Fretting Wear, High Hertzian, High-Frequency, Linear-Oscillation (SRV) |
|
ASTM D6425 |
Friction and Wear Properties of Extreme Pressure (EP) Using SRV |
|
ASTM D5707 |
Friction and Wear Properties using SRV |
|
ASTM E2412 |
FTIR Analysis, In-Service Fluid |
|
ASTM D7624 |
FTIR Analysis, In-Service Fluid, Nitration |
|
ASTM D7414 |
FTIR Analysis, In-Service Fluid, Oxidation |
|
ASTM D7412 |
FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear |
|
ASTM D7844 |
FTIR Analysis, In-Service Fluid, Soot |
|
ASTM D7415 |
FTIR Analysis, In-Service Fluid, Sulfate Content |
|
ASTM D7214 |
FTIR Analysis, Oxidation by Peak Area Increase |
|
SAVLAB WHAT |
Fuel Additive Water Uptake |
|
ASTM D3524 |
Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) |
|
ASTM D3525 |
Fuel Dilution, Gasoline |
|
SAVLAB FEI |
Fuel Efficiency Index (FEI) |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 20, 30, or 40 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), Other Passes |
|
ISO 14635-1 |
FZG Gear Test |
|
ISO 14635-2 |
FZG Gear Test (A10/16.6R/30 or A10/16.6R/90) Custom |
|
ISO 14635-3 |
FZG Gear Test, Grease |
|
ASTM D5182 |
FZG Gear Test - Up to 12 Stages |
|
ASTM D5182 |
FZG Gear Test - Up to 14 Stages |
|
ASTM D2887 |
Gas Chromatography - Carbon Distribution Extended |
|
SAVLAB GES |
GE Locomotive Specification (GE Package 1, B82-1 test) |
|
ASTM D5133 |
Gelation Index |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D4291 |
Glycol |
|
ASTM D2982 |
Glycol-Base Antifreeze in Used Oils |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone |
|
US Steel LT-37 |
Grease Mobility |
|
ASTM D240 |
Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) |
|
ASTM D381 |
Gum Content of Gasoline (Washed and Unwashed) |
|
ASTM D1404 |
Harmful Particles in Grease |
|
ASTM D7216 |
HDD Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
HDD Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
HDD Elastomer Compatibility, MAC, Vamac |
|
ASTM D7216 |
HDD Elastomer Compatibility, NBR, Nitrile |
|
ASTM D7216 |
HDD Elastomer Compatibility, VMQ, Silicone |
|
ASTM D3336 |
High Temperature Bearing Performance Up to 600 Hours |
|
ASTM D6594 |
High Temperature Corrosion Bench Test at 135°C |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, New Oil |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Other Shear |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Used Oil |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, Used Oil |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Below 50°C |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Other Shear, Other Temperature |
|
CEC L-036-90 Modified |
High Temperature High Shear Viscosity, 150°C, New Oil |
|
CEC L-036-90 Modified |
High Temperature High Shear Viscosity, 150°C, Used Oil |
|
ASTM D3527 |
High Temperature Life, Wheel Bearing Grease |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, New Oil |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Shear |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Temperature |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Used Oil |
|
SAEJ1703 HTS |
High Temperature Stability |
|
ASTM D4287 |
High-Shear Viscosity Using a Cone/Plate Viscometer |
|
ASTM D6922 |
Homogeneity & Miscibility |
|
ASTM D1319 |
Hydrocarbon Type |
|
ASTM D2619 |
Hydrolytic Stability |
|
ASTM D1957 |
Hydroxyl Number |
|
ASTM D893 |
Insolubles, Pentane |
|
ASTM D5554 |
Iodine Value |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, Below 0°C |
|
ASTM D445 |
Kinematic Viscosity, Used or In-Service Oil |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 04 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 04 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 08 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 08 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 20 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 20 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 30 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 30 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 40 Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear 40 Hours + pre & post shear VI |
|
CEC L-45-99 Mod. & D445 |
KRL Shear Custom Hours + 1 Temperature pre & post shear KV |
|
CEC L-45-99 Mod. & D2270 |
KRL Shear Custom Hours + pre & post shear VI |
|
ASTM D7109 |
Kurt Orbahn Shear Stability - Includes 30 and 90 Passes |
|
ASTM D6278 |
Kurt Orbahn Shear Stability, 30 Passes |
|
ASTM D6278 Mod. |
Kurt Orbahn Shear Stability, 90 Passes |
|
ASTM D6278 Mod. |
Kurt Orbahn Shear Stability, 100 Passes |
|
ASTM D6278 Mod. |
Kurt Orbahn Shear Stability, Custom Number of Passes |
|
ASTM D4290 |
Leakage of Wheel Bearing Grease |
|
SAVLAB LINPUMP |
Lincoln Vent Meter Pumpability, Below 0ºC |
|
SAVLAB LINPUMP |
Lincoln Vent Meter Pumpability, Room Temperature |
|
ASTM D1478 |
Low Temperature Torque |
|
ASTM D4693 |
Low Temperature Torque, Wheel Bearing Grease |
|
ASTM D6079 |
Lubricity by HFRR |
|
SAVLAB MIC |
Microscopy |
|
ASTM D3829 |
Mini-Rotary Viscosity (MRV), Single Temperature |
|
ASTM D5762 |
Nitrogen |
|
ASTM D5291 |
Nitrogen - Carlo Erba |
|
ASTM D4629 |
Nitrogen by Chemiluminescence |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6375 |
Noack Volatility by TGA |
|
ASTM D2700 |
Octane Number (Motor Rating) |
|
ASTM D2699 |
Octane Number (Research Rating) |
|
ASTM D6184 |
Oil Separation Percent, Wire Cone Method |
|
ASTM D1742 |
Oil Separation, Storage of Greases |
|
FTM 321 |
Oil Separation, Wire Cone Method, Grease |
|
ASTM D3704 |
Oscillation Friction Wear, Grease |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 1000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 2000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 3000 Hours) |
|
ASTM D2893 |
Oxidation Characteristics Extreme Pressure |
|
ASTM D6186 |
Oxidation Induction Time by PDSC |
|
ASTM E1858 |
Oxidation Induction Time by PDSC |
|
CEC L-085-T99 |
Oxidation Induction Time by PDSC |
|
SAEJ1703 OR |
Oxidation Resistance |
|
EN 15751 |
Oxidation Stability (Bio-based FAME Only) Rancimat |
|
ASTM D7462 |
Oxidation Stability (Biodiesel) |
|
ASTM D7462 |
Oxidation Stability (Biodiesel - B100 Option) |
|
EN 14112 |
Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat |
|
ASTM D525 |
Oxidation Stability (Gasoline) |
|
ASTM D942 |
Oxidation Stability (Grease) 100 Hours |
|
ASTM D2274 |
Oxidation Stability (Petroleum Fuel Oil) |
|
ASTM D5483 |
Oxidation Stability of Greases by PDSC |
|
ASTM D2112 |
Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C |
|
CEC L-48 |
Oxidation Stability of Lubricating Oils by Artificial Aging |
|
ISO 4406 |
Particle Count |
|
ASTM D7619/ISO 4406 |
Particle Count and Sizing |
|
ASTM D7321 |
Particulate Contamination for Biodiesel Fuels |
|
ASTM D6217 |
Particulate Contamination for Diesel Fuels |
|
IP 346 |
PCA - Polycyclic Analysis |
|
ASTM D7317 |
Pentane Insolubles by Filtration |
|
ASTM D3703 |
Peroxide Value |
|
SAEJ1703 pH |
pH Determination |
|
SAVLAB PH |
pH Determination |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 16 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 32 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 48 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 64 Hours |
|
SAVLAB PEI |
Phosphorus Emissions Index (PEI) at 250ºC, 1 Hour |
|
ASTM D97 |
Pour Point |
|
ASTM D5853 |
Pour Point for Crude Oils |
|
ASTM D3520 |
Quenching Time |
|
SAVLAB RBP |
Reflux Boiling Point |
|
ASTM D1218 |
Refractive Index |
|
ASTM D323 |
Reid Vapor Pressure |
|
ASTM D4049 |
Resistance of Lubricating Grease to Water Spray |
|
ASTM D1831 |
Roll Stability of Grease |
|
ASTM D8022 |
Roll Stability, Presence of Water |
|
ASTM D2272 |
Rotating Bomb Oxidation Test (RBOT) Single Run |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run |
|
ASTM D2272 |
RPVOT, Run to End-of-Test, Hard Break |
|
ASTM D665 |
Rust Prevention 24 Hours (Method A or B) |
|
ASTM D665 |
Rust Prevention 4 Hours (Method A or B) |
|
ASTM D1743 |
Rust Prevention Properties of Grease |
|
ASTM D1748 |
Rust Protection by Humidity Cabinet |
|
ASTM D94 |
Saponification Number |
|
ASTM D5133 |
Scanning Brookfield Viscosity (-5°C to -40°C) |
|
ASTM D5133 |
Scanning Brookfield Viscosity, Extended Temperature Range |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D4310 |
Sludging & Corrosion Tendency Up to 1000 Hours |
|
ASTM D5621 |
Sonic Shear, Hydraulic Fluids |
|
ASTM D2603 |
Sonic Shear, Oils |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM E1269 |
Specific Heat |
|
ASTM E1269 & E1133 |
Specific Heat and TGA for Fluids |
|
FTM 203C |
Stable Pour Point |
|
ASTM D5827 |
Sulfate Analysis (SO4) |
|
ASTM D874 |
Sulfated Ash |
|
SAVLAB SFACALC |
Sulfated Ash, Calculated from ICP Results |
|
ASTM D5453 |
Sulfur |
|
ASTM D5453 & D5762 |
Sulfur and Nitrogen Package |
|
ASTM D5185 |
Sulfur by Elemental Analysis by Inductively Coupled Plasma |
|
ASTM D4294 |
Sulfur by XRF - Energy Dispersive |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D4927 |
Sulfur Content for Automatic Transmission Fluid by XRF |
|
SAVLAB SEI |
Sulfur Emissions Index, (SEI) |
|
ASTM D1662 |
Sulfur, Active |
|
ASTM D1331 |
Surface Tension |
|
ASTM D1084 B |
T-Bar Viscosity |
|
ASTM E1131 |
TGA Soot |
|
SAVLAB TGASCAN |
TGA Thermal Scan or Isotherm |
|
ASTM D2717 |
Thermal Conductivity - Single Temperature |
|
ASTM D2070 |
Thermal Stability (Hydraulic Fluids) |
|
ASTM D6335 |
Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) |
|
ASTM D7097 |
Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) |
|
ASTM D8447 |
Thermo-oxidation Engine Oil Simulation Test (TURBO) |
|
ASTM D4742 |
Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils |
|
ASTM D7098 |
Thin Film Oxygen Uptake Test (TFOUT) Catalyst B |
|
ASTM D2782 |
Timken Extreme Pressure (Specify Starting Load) |
|
ASTM D2509 |
Timken OK Load for Grease (Specify Starting Load) |
|
ASTM D482 |
Total Ash |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D2273 |
Trace Sediment |
|
DIN 50324 |
Tribological Test - Friction and Wear Model Test for Sliding Friction of Solids(Ball on Disc System) |
|
DIN ISO 7148-1 |
Tribological Test - Metallic Bearing Materials for Plain Bearings Under Condi-tions of Boundary Lubrication |
|
DIN ISO 7148-2 |
Tribological Test - Polymer-Based Plain Bearing Materials Under Specified Working Conditions |
|
DIN 51834 |
Tribological Test - Translatory Oscillation Apparatus - Part 2: Determination of Friction and Wear Data for Lubricating Oils |
|
ASTM D7420 |
Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV |
|
ASTM D2008 |
UV Absorbance to Absorptivity |
|
ASTM D2879 |
Vapor Pressure by Isoteniscope, Multiple Temperatures |
|
ASTM D2879 |
Vapor Pressure by Isoteniscope, Single Temperature |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C and 100°C) |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 20 Passes |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 30 Passes |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 40 Passes |
|
ASTM D2532 |
Viscosity Stability at Low Temperature |
|
ASTM D2369 |
Volatile Organic Content (VOC) |
|
EPA Test 24 |
Volatile Organic Content (VOC) |
|
ASTM D2709 |
Water and Sediment |
|
ASTM D1768 |
Water and Sediment for Opaque or In-Service Oils |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D1533 |
Water in Insulating Liquids by Coulometric Karl Fischer Titration |
|
SAEJ1703 WTT |
Water Tolerance |
|
ASTM D1264 |
Water Washout (Single Bearing/Single Temperature) |
|
ASTM D1264 |
Water Washout (Two Bearings Per Method/Single Temperature) |
|
ASTM G 99 |
Wear Testing with a Pin-on-Disk Apparatus |
|
SAEJ1703 WERBP |
Wet Equilibrium Reflux Boiling Point |
|
SAVLAB EV-WCT |
Wire Corrosion Test |
|
API SN, ILSAC GF-5/GF-5 Plus & SAE J183 |
|
|
ASTM D445 |
Viscosity, Kinematic 40°C or 100°C |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify option A if required) |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D5133 |
Gelation Index |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6335 |
Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) |
|
ASTM D6557 |
Ball Rust Test |
|
ASTM D6794 |
Engine Oil Water Tolerance (EOWT) |
|
ASTM D6795 |
Engine Oil Filterability (EOFT) |
|
ASTM D6922 |
Homogeneity & Miscibility |
|
ASTM D7097 |
Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7563 |
Emulsion of Water and Simulated Ed85 Fuel |
|
API CK / FA-4 |
|
|
ASTM D874 |
Sulfated Ash |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6594 |
High Temperature Corrosion Bench Test at 135°C |
|
ASTM D7109 |
Kurt Orbahn Shear Stability - Includes 30 and 90 Passes |
|
ASTM D7216 |
HDD Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
HDD Elastomer Compatibility, FKM, Fluroelastomer |
|
ASTM D7216 |
HDD Elastomer Compatibility, MAC, Vamac |
|
ASTM D7216 |
HDD Elastomer Compatibility, NBR, Nitrile |
|
ASTM D7216 |
HDD Elastomer Compatibility, VMQ, Silicone |
|
Engine Oil Tests |
|
|
ASTM D92 |
Flash Point and Fire Point, Cleveland Open Cup |
|
ASTM D97 |
Pour Point |
|
ASTM D287 |
API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) |
|
ASTM D445 |
Kinematic Viscosity, 0oC and Above |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, Below 0ºC |
|
ASTM D445 |
Kinematic Viscosity, Used or In-Service Oil |
|
ASTM D664 |
Acid Number |
|
ASTM D874 |
Sulfated Ash |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify option A if required) |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C & 100°C) |
|
ASTM D2896 |
Base Number |
|
ASTM D2982 |
Glycol |
|
ASTM D3524 |
Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) |
|
ASTM D3525 |
Fuel Dilution, Gasoline |
|
ASTM D3829 |
Mini-Rotary Viscosity (MRV), Single Temperature |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM D4291 |
Glycol |
|
ASTM D4629 |
Nitrogen by Chemiluminescence |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, Used Oil |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Below 50oC |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Multi-Temperature, Multi-Shear |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Other Shear |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Other Temperature |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D4739 |
Base Number |
|
ASTM D4742 |
Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D5133 |
Gelation Index |
|
ASTM D5133 |
Scanning Brookfield Viscosity (-5ºC to -40ºC) |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5293 Mod. |
Cold Cranking Simulator, Temperature Scan |
|
ASTM D5453 |
Sulfur |
|
ASTM D5453 & D5762 |
Sulfur & Nitrogen Package |
|
ASTM D5762 |
Nitrogen |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6082 |
Foaming, Sequence IV (Specify option A if required) |
|
ASTM D6278 |
Kurt Orbahn Shear Stability, 30 Passes |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6335 |
Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) |
|
ASTM D6375 |
Noack Volatility by TGA |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D6425 |
Friction and Wear Properties of Extreme Pressure (EP) Using SRV |
|
ASTM D6443 |
Chlorine by XRF |
|
ASTM D6557 |
Ball Rust Test |
|
ASTM D6594 |
High Temperature Corrosion Bench Test at 135°C |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, New Oil |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Other Shear |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Used Oil |
|
ASTM D6794 |
Engine Oil Water Tolerance (EOWT) |
|
ASTM D6795 |
Engine Oil Filterability (EOFT) |
|
ASTM D6922 |
Homogeneity & Miscibility |
|
ASTM D7097 |
Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) |
|
ASTM D7098 |
Thin Film Oxygen Uptake Test (TFOUT) Catalyst B |
|
ASTM D7109 |
Kurt Orbahn Shear Stability - Includes 30 and 90 Passes |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
HDD Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
HDD Elastomer Compatibility, FKM, Fluroelastomer |
|
ASTM D7216 |
HDD Elastomer Compatibility, MAC, Vamac |
|
ASTM D7216 |
HDD Elastomer Compatibility, NBR, Nitrile |
|
ASTM D7216 |
HDD Elastomer Compatibility, VMQ, Silicone |
|
CEC L-105 |
ACEA Low Temperature Pumpability |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 216 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 216 Hours |
|
SAVLAB CAP |
Viscosity by Cone & Plate |
|
SAVLAB PEI |
Phosphorus Emissions Index (PEI) at 250ºC, 1 Hour |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 16 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 32 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 48 Hours |
|
SAVLAB PEI 165 |
Phosphorus Emissions Index (PEI) at 165ºC, 64 Hours |
|
SAVLAB SEI |
Sulfur Emissions Index, (SEI) |
|
SAVLAB SFACALC |
Sulfated Ash, Calculated from ICP Results |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, New Oil |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Shear |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Temperature |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Used Oil |
|
ASTM D8447 |
Thermo-oxidation Engine Oil Simulation Test (TURBO) |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 20 Passes |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 30 Passes |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 40 Passes |
|
Automatic Transmission Fluid (ATF) |
|
|
ASTM D92 |
Flash Point and Fire Point, Cleveland Open Cup |
|
ASTM D97 |
Pour Point |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D287 |
API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D445 |
Kinematic Viscosity, Below 0°C |
|
ASTM D664 |
Acid Number |
|
ASTM D665 |
Rust Prevention 4 Hours (Method A or B) |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify option A if required) |
|
ASTM D974 |
Acid Number |
|
ASTM D974 |
Base Number |
|
ASTM D1500 |
Color |
|
ASTM D1748 |
Rust Protection by Humidity Cabinet |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C & 100°C) |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2896 |
Base Number |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D3233 |
Falex Extreme Pressure |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM D4172 |
Four Ball Wear |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4927 |
Sulfur Content for Automatic Transmission Fluid by XRF |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D5183 |
Coefficient of Friction by Four Ball |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5185 |
Sulfur by Elemental Analysis by Inductively Coupled Plasma |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D6443 |
Chlorine by XRF |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 20 Hours + 1 Temperature pre & post shear KV |
|
FTM 203C |
Stable Pour Point |
|
Brake Fluid Tests |
|
|
ASTM D445 |
Kinematic Viscosity at -40°C |
|
ASTM D445 |
Kinematic Viscosity at 100°C |
|
SAEJ1703 COM |
Compatibility |
|
SAEJ1703 COR |
Corrosion Test |
|
SAEJ1703 CS |
Chemical Stability |
|
SAEJ1703 ERBP |
Equilibrium Reflux Boiling Point |
|
SAEJ1703 ESBR |
Effect on SBR Cups |
|
SAEJ1703 HTS |
High Temperature Stability |
|
SAEJ1703 LTF |
Fluidity at Low Temperature |
|
SAEJ1703 OR |
Oxidation Resistance |
|
SAEJ1703 pH |
pH Determination |
|
SAEJ1703 WERBP |
Wet Equilibrium Reflux Boiling Point |
|
SAEJ1703 WTT |
Water Tolerance |
|
Condition Monitoring Tests |
|
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D445 |
Kinematic Viscosity, Used or In-Service Oil |
|
ASTM D482 |
Total Ash |
|
ASTM D664 |
Acid Number |
|
ASTM D874 |
Sulfated Ash |
|
ASTM D892 |
Foaming, Sequence I - III (Specify Option A if Required) |
|
ASTM D974 |
Acid Number |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D1500 |
Color |
|
ASTM D1768 |
Water & Sediment for Opaque or In-Service Oils |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run |
|
ASTM D2500 |
Cloud Point |
|
ASTM D2709 |
Water & Sediment |
|
ASTM D2887 |
Gas Chromatography - Carbon Distribution Extended |
|
ASTM D2896 |
Base Number |
|
ASTM D2982 |
Glycol-Base Antifreeze in Used Oils |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D3427 |
Air Release / Gas Bubble Separation |
|
ASTM D3524 |
Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) |
|
ASTM D3525 |
Fuel Dilution, Gasoline |
|
ASTM D4291 |
Glycol |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, Used Oil |
|
ASTM D4739 |
Base Number |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5185 |
Sulfur by Elemental Analysis by Inductively Coupled Plasma |
|
ASTM D6217 |
Particulate Contamination for Diesel Fuels |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Used Oil |
|
ASTM D7214 |
FTIR Analysis, Oxidation by Peak Area Increase |
|
ASTM D7321 |
Particulate Contamination for Biodiesel Fuels |
|
ASTM D7412 |
FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear |
|
ASTM D7414 |
FTIR Analysis, In-Service Fluid, Oxidation |
|
ASTM D7415 |
FTIR Analysis, In-Service Fluid, Sulfate Content |
|
ASTM D7619 / ISO 4406 |
Particle Count & Sizing (Diesel Fuels) |
|
ASTM D7624 |
FTIR Analysis, In-Service Fluid, Nitration |
|
ASTM D7844 |
FTIR Analysis, In-Service Fluid, Soot |
|
ASTM E2412 |
FTIR Analysis, In-Service Fluid |
|
SAVLAB IRG |
Fourier Transform Infra-Red, FTIR, Glycol Analysis |
|
SAVLAB IRW |
Fourier Transform Infra-Red, FTIR, Water Analysis |
|
ISO 4406 |
Particle Count |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Used Oil |
|
Diesel Fuel Tests |
|
|
ASTM D86 Modified |
Distillation by Gas Chromatograph |
|
ASTM D93 |
Flash Point, Pensky-Martins Closed Cup |
|
ASTM D97 |
Pour Point |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D189 |
Carbon Residue, Conradson |
|
ASTM D240 |
Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) |
|
ASTM D323 |
Reid Vapor Pressure |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D482 |
Total Ash |
|
ASTM D524 |
Carbon Residue, Ramsbottom |
|
ASTM D664 |
Acid Number |
|
ASTM D893 |
Insolubles, Pentane |
|
ASTM D974 |
Acid Number |
|
ASTM D976 & D4737 |
Cetane Index (Calculated from D1298 and D86) |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D1500 |
Color |
|
ASTM D2274 |
Oxidation Stability (Petroleum Fuel Oil) |
|
ASTM D2500 |
Cloud Point |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2709 |
Water and Sediment |
|
ASTM D2887 |
Gas Chromatography - Carbon Distribution |
|
ASTM D5133 |
Scanning Brookfield Viscosity (-5°C to -40°C) |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5186 |
Aromatics in Diesel Fuel |
|
ASTM D5291 |
Carbon, Hydrogen and Nitrogen Content |
|
ASTM D5291 |
Nitrogen - Carlo Erba |
|
ASTM D5453 |
Sulfur |
|
ASTM D5453 & 5762 |
Sulfur and Nitrogen Package |
|
ASTM D6079 |
Lubricity by HFRR |
|
ASTM D6217 |
Particulate Contamination for Diesel Fuels |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6371 |
Cold Filter Plug Point |
|
ASTM D7321 |
Particulate Contamination for Biodiesel Fuels |
|
ASTM D7371 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
ASTM D7412 |
FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear |
|
ASTM D7414 |
FTIR Analysis, In-Service Fluid, Oxidation |
|
ASTM D7415 |
FTIR Analysis, In-Service Fluid, Sulfate Content |
|
ASTM D7462 |
Oxidation Stability (Biodiesel) |
|
ASTM D7462 |
Oxidation Stability (Biodiesel - B100 Option) |
|
ASTM E659 |
Auto-Ignition Temperature, Liquid Chemicals |
|
EN 14078 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
EN 14112 |
Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat |
|
EN 15751 |
Oxidation Stability (Bio-based FAME Only) Rancimat |
|
SAVLAB BDICP |
Elemental Analysis for Biodiesel Fuels |
|
Elastomer Compatibility Tests |
|
|
ASTM D4289 |
Elastomer Compatibility NBR L and CR Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L or CR Grease |
|
ASTM D4289 |
Elastomer Compatibility HPM Elastomer |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-5 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate |
|
ASTM D7216 |
GF-6 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile |
|
ASTM D7216 |
GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone |
|
ASTM D7216 |
HDD Elastomer Compatibility, ACM, Polyacrylate |
|
ASTM D7216 |
HDD Elastomer Compatibility, FKM, Fluoroelastomer |
|
ASTM D7216 |
HDD Elastomer Compatibility, MAC, Vamac |
|
ASTM D7216 |
HDD Elastomer Compatibility, NBR, Nitrile |
|
ASTM D7216 |
HDD Elastomer Compatibility, VMQ, Silicone |
|
CEC L-112-16 |
Elastomer Compatibility, RE6, FKM, Fluoroelastomer |
|
CEC L-112-16 |
Elastomer Compatibility, RE7, ACM, Polyacrylate |
|
CEC L-112-16 |
Elastomer Compatibility, RE8, HNBR, Nitrile |
|
CEC L-112-16 |
Elastomer Compatibility, RE9, AEM, Ethylene Acrylic |
|
ISO 1817 |
Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours |
|
Electric Vehicle (EV) Lubricant and Fluid Tests |
|
|
ASTM D92 |
Flash and Fire Points by Cleveland Open Cup |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D217 |
Cone Penetration |
|
ASTM D445 |
Kinematic Viscosity at 100°C |
|
ASTM D877 |
Dielectric Breakdown Voltage |
|
ASTM D892 |
Foaming Characteristics of Lubricating Oils |
|
ASTM D924 |
Dissipation/Power Factor |
|
ASTM D1264 |
Water Washout (Single Temperature) |
|
ASTM D1478 |
Low-Temperature Torque - Grease |
|
ASTM D1742 |
Oil Separation, Storage of Greases |
|
ASTM D1831 |
Roll Stability of Grease |
|
ASTM D2265 |
Dropping Point |
|
ASTM D2266 |
Four Ball Wear (Grease) |
|
ASTM D2596 |
Four-Ball Extreme Pressure Up to 400 kg. |
|
ASTM D2596 |
Four-Ball Extreme Pressure Above 400 kg. |
|
ASTM D3336 |
High Temperature Bearing Performance Up to 600 Hours |
|
ASTM D3427 |
Air Release, Gas Bubble Separation |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM D4170 |
Fretting Wear, Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L and CR Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L or CR Grease |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity at 150°C |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D4693 |
Low-Temperature Torque, Grease |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5706 |
Extreme Pressure, High-Frequency, Linear Oscillation, SRV |
|
ASTM D6082 |
Foaming, Sequence IV (Specify Option A if Required) |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test - 2 Bearings) |
|
ASTM D6184 |
Oil Separation from Lubricating Grease |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D6443 |
Chlorine by XRF |
|
ASTM D7594 |
Fretting Wear, High Hertzian Contact, High-Frequency, Linear-Oscillation, SRV |
|
ASTM E1269 |
Specific Heat Capacity by Differential Scanning Calorimetry |
|
CEC L-45-99 |
High-Temperature High Shear Viscosity |
|
CEC L-48 |
Oxidation Stability of Lubricating Oils by Artificial Aging |
|
SAVLAB EV-CDT |
Conductive Deposit Test |
|
SAVLAB EV-WCT |
Wire Corrosion Test |
|
Electrical Insulating Fluid Tests |
|
|
ASTM D92 |
Flash Point and Fire Point, Cleveland Open Cup |
|
ASTM D97 |
Pour Point |
|
ASTM D445 |
Kinematic Viscosity (and Calculation of Dynamic Viscosity) |
|
ASTM D611 |
Aniline Point |
|
ASTM D664 |
Acid Number |
|
ASTM D877 |
Dielectric Breakdown Voltage |
|
ASTM D924 |
Dissipation/Power Factor |
|
ASTM D974 |
Acid and Base Number by Color-Indicator Titration |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D1500 |
Color |
|
ASTM D1533 |
Water in Insulating Liquids by Coulometric Karl Fischer Titration |
|
ASTM D2112 |
Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C |
|
ASTM D2717 |
Thermal Conductivity - Single Temperature |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity |
|
Gear Lubricant Tests |
|
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D94 |
Saponification Number |
|
ASTM D97 |
Pour Point |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D287 |
API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D664 |
Acid Number |
|
ASTM D665 |
Rust Prevention 4 Hours (Method A or B) |
|
ASTM D665 |
Rust Prevention 24 Hours (Method A or B) |
|
ASTM D874 |
Sulfated Ash |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D893 |
Insolubles, Pentane |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 1000 Hours) |
|
ASTM D1500 |
Color |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C and 100°C) |
|
ASTM D2603 |
Sonic Shear, Oils |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2670 |
Falex Pin & Vee Wear |
|
ASTM D2711 |
Demulsibility - Procedure A (No EP Additives) |
|
ASTM D2711 |
Demulsibility - Procedure B (Contains EP Additives) |
|
ASTM D2714 |
Block on Ring Friction and Wear |
|
ASTM D2782 |
Timken Extreme Pressure (SpecifyStarting Load) |
|
ASTM D2783 |
Four Ball Extreme Pressure Up to 400 kg. |
|
ASTM D2783 |
Four Ball Extreme Pressure Above 400 kg. |
|
ASTM D2887 |
Gas Chromatography - Carbon Distribution |
|
ASTM D2893 |
Oxidation Characteristics Extreme Pressure |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D3233 |
Falex Extreme Pressure |
|
ASTM D3427 |
Air Release / Gas Bubble Separation |
|
ASTM D4172 |
Four Ball Wear |
|
ASTM D4310 |
Sludging & Corrosion Tendency Up to 1000 Hours |
|
ASTM D5182 |
FZG Gear Test - Up to 12 Stages |
|
ASTM D5182 |
FZG Gear Test - Up to 14 Stages |
|
ASTM D5183 |
Coefficient of Friction by Four Ball |
|
ASTM D5453 & D5762 |
Sulfur and Nitrogen Package |
|
ASTM D5620 |
Drain and Dry Mode Using Falex Pin & Vee Block Test Machine |
|
CEC L-45-99 Mod. & D445 |
KRL Shear 20 Hours + 1 Temperature pre & post shear KV |
|
FTM 3456 |
Channeling Characteristics |
|
ISO 1817 |
Elastomer Compatibility, Gear Oils, NBR/SRE 28SX, 168 Hours |
|
Grease Tests |
|
|
ASTM D92 |
Flash Point, Grease |
|
ASTM D94 |
Saponification Number |
|
ASTM D217 |
Cone Penetration, Grease, Unworked |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 60 Strokes |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 10,000 Strokes |
|
ASTM D217 |
Cone Penetration, Grease, Worked, 100,000 Strokes |
|
ASTM D566 |
Dropping Point Grease |
|
ASTM D942 |
Oxidation Stability (Grease) 100 Hours |
|
ASTM D972 |
Evaporation Loss (Grease) - Specify Time and Temperature |
|
ASTM D1092 |
Apparent Viscosity, Grease |
|
ASTM D1264 |
Water Washout (Single Temperature) |
|
ASTM D1264 |
Water Washout (Two Bearings Per Method/ Single Temperature) |
|
ASTM D1403 |
Cone Penetration, 1/4 or 1/2 Scale |
|
ASTM D1404 |
Harmful Particles in Grease |
|
ASTM D1478 |
Low Temperature Torque - Grease |
|
ASTM D1742 |
Oil Separation, Storage of Greases |
|
ASTM D1743 |
Rust Prevention Properties of Grease |
|
ASTM D1831 |
Roll Stability of Grease |
|
ASTM D2265 |
Dropping Point |
|
ASTM D2266 |
Four Ball Wear (Grease) |
|
ASTM D2509 |
Timken OK Load for Grease (Specify starting load) |
|
ASTM D2595 |
Evaporation Loss, Grease, Wide Temperature Range |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Up to 400 kg. |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Above 400 kg. |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D3336 |
High Temperature Bearing Performance Up to 600 Hours |
|
ASTM D3527 |
High Temperature Life, Wheel Bearing Grease |
|
ASTM D3704 |
Oscillation Friction Wear, Grease |
|
ASTM D4048 |
Copper Strip Corrosion, Grease |
|
ASTM D4049 |
Resistance of Lubricating Grease to Water Spray |
|
ASTM D4170 |
Fretting Wear, Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L and CR Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L or CR Grease |
|
ASTM D4289 |
Elastomer Compatibility HPM Elastomer |
|
ASTM D4290 |
Leakage of Wheel Bearing Grease |
|
ASTM D4693 |
Low Temperature Torque, Grease |
|
ASTM D5483 |
Oxidation Stability of Greases by PDSC |
|
ASTM D5706 |
Extreme Pressure Properties Using SRV, Procedure A |
|
ASTM D5706 |
Extreme Pressure Properties Using SRV, Procedure B |
|
ASTM D5707 |
High Frequency, Linear Oscillation, SRV of Grease |
|
ASTM D5969 |
Corrosion-Preventive, Dilute Synthetic Sea Water Environments |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) |
|
ASTM D6138 |
Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test - 2 Bearings) |
|
ASTM D6184 |
Oil Separation Percent, Wire Cone Method |
|
ASTM D6185 |
Compatibility of Two Greases |
|
ASTM D6186 |
Oxidation Induction Time by PDSC |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6482 |
Cooling Curve Analysis of Aqueous Polymer Quenchants |
|
ASTM D7420 |
Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV |
|
ASTM D7594 |
Fretting Wear, High Hertzian, High-Frequency, Linear-Oscillation (SRV) |
|
ASTM D8022 |
Roll Stability, Presence of Water |
|
DIN 51805 |
Flow Pressure, Kesternich Method |
|
FTM-321 |
Oil Separation, Wire Cone Method, Grease |
|
FTM-3005 |
Dirt Count of Grease |
|
ISO 14635-1 |
FZG Gear Test |
|
ISO 14635-2 |
FZG Gear Test (A10/16.6R/30 or A10/16.6R/90) Custom |
|
ISO 14635-3 |
FZG Gear Test, Grease |
|
SAVLAB IR |
Fourier Transform Infra-Red, FTIR, Spectra Only |
|
SAVLAB LINPUMP |
Lincoln Vent Meter Pumpability, Below 0ºC |
|
SAVLAB LINPUMP |
Lincoln Vent Meter Pumpability, Room Temperature |
|
US Steel LT-37 |
Grease Mobility |
|
Hydraulic Fluid Tests |
|
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D130 |
Copper Strip Corrosion |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, Below 0°C |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D664 |
Acid Number |
|
ASTM D665 |
Rust Prevention 4 Hours (Method A or B) |
|
ASTM D665 |
Rust Prevention 24 Hours (Method A or B) |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 1000 Hours) |
|
ASTM D1401 |
Emulsion Characteristics / Water Separability |
|
ASTM D2070 |
Thermal Stability (Hydraulic Fluids) |
|
ASTM D2112 |
Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run |
|
ASTM D2532 |
Viscosity Stability at Low Temperature |
|
ASTM D2619 |
Hydrolytic Stability |
|
ASTM D2670 |
Falex Pin & Vee Wear |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D3427 |
Air Release / Gas Bubble Separation |
|
ASTM D4172 |
Four Ball Wear |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5621 |
Sonic Shear, Hydraulic Fluids |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D7624 |
FTIR Analysis, In-Service Fluid, Nitration |
|
ISO 4406 |
Particle Count |
|
Marine Lubricant Tests |
|
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D97 |
Pour Point |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D664 |
Acid Number |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify option A if required) |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C & 100°C) |
|
ASTM D2670 |
Falex Pin & Vee Wear |
|
ASTM D2896 |
Base Number |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5453 |
Sulfur |
|
ASTM D5762 |
Nitrogen |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6278 |
Kurt Orbahn Shear Stability, 30 Passes |
|
ASTM D6795 |
Engine Oil Filterability (EOFT) |
|
Marine Fuel Tests |
|
|
ASTM D97 |
Pour Point |
|
ASTM D381 |
Gum Content of Gasoline (Washed and Unwashed) |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D482 |
Total Ash |
|
ASTM D525 |
Oxidation Stability (Gasoline) |
|
ASTM D664 |
Acid Number |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D2274 |
Oxidation Stability (Petroleum Fuel Oil) |
|
ASTM D2500 |
Cloud Point |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM D4294 |
Sulfur by XRF - Energy Dispersive |
|
ASTM D4530 |
Carbon Residue, Micro |
|
ASTM D4737 |
Cetane Index (Calculated from D1298 and D86) |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D6371 |
Cold Filter Plug Point |
|
NACE TM0172 |
Corrosive Properties of Cargoes in Petroleum Product Pipelines |
|
SAVLAB WHAT |
Fuel Additive Water Uptake |
|
Turbine Lubricant Tests |
|
|
ASTM D445 |
Kinematic Viscosity, Used or In-Service Oil |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D664 |
Acid Number |
|
ASTM D893 |
Insolubles, Pentane |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 1000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 2000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 3000 Hours) |
|
ASTM D974 |
Acid Number |
|
ASTM D1401 |
Emulsion Characteristics, Water Separability |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Run to Hard Break |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2709 |
Water and Sediment |
|
ASTM D2783 |
Four Ball Extreme Pressure Up to 400 kg. |
|
ASTM D2783 |
Four Ball Extreme Pressure Above 400 kg. |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D7412 |
FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear |
|
ASTM D7414 |
FTIR Analysis, In-Service Fluid, Oxidation |
|
ASTM D7624 |
FTIR Analysis, In-Service Fluid, Nitration |
|
ASTM D7844 |
FTIR Analysis, In-Service Fluid, Soot |
|
ISO 4406 |
Particle Count |
|
Tests by Category |
|
|
Viscosity |
|
|
ASTM D97 |
Pour Point |
|
ASTM D445 |
Kinematic Viscosity, 0°C and Above |
|
ASTM D445 |
Kinematic Viscosity, 40°C or 100°C, New Oil |
|
ASTM D445 |
Kinematic Viscosity, Below 0°C |
|
ASTM D445 |
Kinematic Viscosity, Used or In-Service Oil |
|
ASTM D1084 B |
T-Bar Viscosity of Adhesives |
|
ASTM D1092 |
Apparent Viscosity, Grease |
|
ASTM D2270 |
Viscosity Index (Includes D445 at 40°C & 100°C) |
|
ASTM D2532 |
Viscosity Stability at Low Temperature |
|
ASTM D2983 |
Brookfield Viscosity, +20°C to -60°C (Per Temperature) |
|
ASTM D3829 |
Mini-Rotary Viscosity (MRV), Single Temperature |
|
ASTM D4287 |
High-Shear Viscosity Using a Cone/Plate Viscometer |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, New Oil |
|
ASTM D4683 |
High Temperature High Shear / TBS Viscosity, 150°C, Used Oil |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Below 50°C |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Multi-Temperature, Multi-Shear |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Other Shear |
|
ASTM D4683 Mod. |
High Temperature High Shear / TBS Viscosity, Other Temperature |
|
ASTM D4684 |
TP-1 MRV Viscosity, Single Temperature |
|
ASTM D5133 |
Scanning Brookfield Viscosity (-5°C to -40°C) |
|
ASTM D5133 |
Scanning Brookfield Viscosity, Extended Temperature Range |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 20 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 30 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), 40 Passes |
|
ASTM D5275 |
Fuel Injector Shear Stability (FISST), Other Passes |
|
ASTM D5293 |
Cold Cranking Simulator, Single Temperature |
|
ASTM D5293 Mod. |
Cold Cranking Simulator, Temperature Scan |
|
ASTM D5853 |
Pour Point for Crude Oils |
|
ASTM D6022 |
Calculated Permanent Shear Stability Index |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, New Oil |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Other Shear |
|
ASTM D6616 |
High Temperature High Shear / TBS Viscosity, 100°C, Used Oil |
|
CEC L-036-90 Modified |
High Temperature High Shear Viscosity, 150°C, New Oil |
|
CEC L-036-90 Modified |
High Temperature High Shear Viscosity, 150°C, Used Oil |
|
FTM 203C |
Stable Pour Point |
|
SAVLAB CAP |
Cone and Plate Viscosity |
|
SAVLAB FEI |
Fuel Efficiency Index (FEI) |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, New Oil |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Shear |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Other Temperature |
|
SAVLAB TBR |
High Temperature Low Shear / TBR Viscosity, Used Oil |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 20 Passes |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 30 Passes |
|
SAVLAB VLP |
Viscosity Loss Profile (VLP), 40 Passes |
|
Wear / Performance / Simulation |
|
|
ASTM D2266 |
Four Ball Wear (Grease) |
|
ASTM D2509 |
Timken OK Load for Grease (Specify starting load) |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Up to 400 kg |
|
ASTM D2596 |
Four Ball Extreme Pressure (Grease) Above 400 kg |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2670 |
Falex Pin & Vee Wear |
|
ASTM D2670 Mod. |
Falex Pin & Vee Wear - Custom Configuration |
|
ASTM D2711 |
Demulsibility - Procedure A (No EP Additives) |
|
ASTM D2711 |
Demulsibility - Procedure B (Contains EP Additives) |
|
ASTM D2714 |
Block on Ring Friction and Wear |
|
ASTM D2782 |
Timken Extreme Pressure (Specify starting load) |
|
ASTM D2783 |
Four Ball Extreme Pressure Up to 400 kg |
|
ASTM D2783 |
Four Ball Extreme Pressure Above 400 kg |
|
ASTM D3233 |
Falex Extreme Pressure |
|
ASTM D4170 |
Fretting Wear, Grease |
|
ASTM D4172 |
Four Ball Wear |
|
ASTM D4289 |
Elastomer Compatibility NBR L and CR Grease |
|
ASTM D4289 |
Elastomer Compatibility NBR L or CR Grease |
|
ASTM D4693 |
Low Temperature Torque, Grease |
|
ASTM D5182 |
FZG Gear Test - Up to 12 Stages |
|
ASTM D5182 |
FZG Gear Test - Up to 14 Stages |
|
ASTM D5183 |
Coefficient of Friction by Four Ball |
|
ASTM D5620 |
Drain and Dry Mode Using Falex Pin & Vee Block Test Machine |
|
ASTM D5706 |
Extreme Pressure Properties of Lubricating Greases Using SRV, Procedure A |
|
ASTM D5706 |
Extreme Pressure Properties of Lubricating Greases Using SRV, Procedure B |
|
ASTM D5707 |
Friction and Wear Properties of Lubricating Grease Using SRV |
|
ASTM D6079 |
Lubricity by HFRR |
|
ASTM D6425 |
Friction and Wear Properties of Extreme Pressure (EP) Using SRV |
|
ASTM D7217 |
Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency,Linear-Oscillation SRV |
|
ASTM D7420 |
Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV |
|
ASTM D7421 |
Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Lin-ear-Oscillation Using SRV |
|
ASTM D7594 |
Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation SRV |
|
ASTM G 99 |
Wear Testing with a Pin-on-Disk Apparatus. |
|
DIN 50324 |
Tribological Testing - Friction and Wear Model Test for Sliding Friction of Solids(Ball on Disc System) |
|
DIN 51834 |
Tribological Test - Translatory Oscillation Apparatus - Part 2: Determination of Friction and Wear Data for Lubricating Oils. |
|
DIN ISO 7148-1 |
Tribological Test - Metallic Bearing Materials for Plain Bearings Under Condi-tions of Boundary Lubrication |
|
DIN ISO 7148-2 |
Tribological Test - Polymer-Based Plain Bearing Materials Under Specified Working Conditions |
|
Oxidation |
|
|
ASTM D525 |
Oxidation Stability (Gasoline) |
|
ASTM D665 |
Rust Prevention 4 Hours (Method A or B) |
|
ASTM D665 |
Rust Prevention 24 Hours (Method A or B) |
|
ASTM D942 |
Oxidation Stability (Grease) 100 Hours |
|
ASTM D942 Mod |
Oxidation Stability (Grease) > 100 Hours |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 1000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 2000 Hours) |
|
ASTM D943 |
Oxidation Characteristics (2.0 TAN or 3000 Hours) |
|
ASTM D1748 |
Rust Protection by Humidity Cabinet |
|
ASTM D2112 |
Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C |
|
ASTM D2272 |
Rotating Bomb Oxidation Test (RBOT) Single Run |
|
ASTM D2272 |
Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run |
|
ASTM D2272 |
RPVOT, Run to End-of-Test, Hard Break |
|
ASTM D2274 |
Oxidation Stability (Petroleum Fuel Oil) |
|
ASTM D2893 |
Oxidation Characteristics Extreme Pressure |
|
ASTM D4310 |
Sludging & Corrosion Tendency (Up to 1000 Hours) |
|
ASTM D4742 |
Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils |
|
ASTM D5483 |
Oxidation Stability of Greases by PDSC |
|
ASTM D6186 |
Oxidation Induction Time by PDSC |
|
ASTM D6335 |
Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) |
|
ASTM D6557 |
Ball Rust Test |
|
ASTM D6594 |
High Temperature Corrosion Bench Test at 135°C |
|
ASTM D7097 |
Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) |
|
ASTM D7098 |
Thin Film Oxygen Uptake Test (TFOUT) Catalyst B |
|
ASTM D7414 |
FTIR Analysis, In-Service Fluid, Oxidation |
|
ASTM D7462 |
Oxidation Stability (Biodiesel) |
|
ASTM D7462 |
Oxidation Stability (Biodiesel - B100 Option) |
|
ASTM E1858 |
Oxidation Induction Time by PDSC |
|
CEC L-48 |
Oxidation Stability of Lubricating Oils by Artificial Aging |
|
CEC L-085-T99 |
Oxidation Induction Time by PDSC |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 168 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, Single Run 216 Hours |
|
CEC L-109 |
Bio-Diesel Oxidation Bench Test, in Duplicate 216 Hours |
|
EN 14112 |
Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat |
|
EN 15751 |
Oxidation Stability (Bio-based FAME Only) Rancimat |
|
SAVLAB EV-CDT |
Conductive Deposit Test |
|
SAVLAB EV-WCT |
Wire Corrosion Test |
|
ASTM D8447 |
Thermo-oxidation Engine Oil Simulation Test (TURBO) |
|
Physical Properties |
|
|
ASTM D86 Modified |
Distillation by Gas Chromatograph |
|
ASTM D92 |
Fire Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point and Fire Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point, Cleveland Open Cup |
|
ASTM D92 |
Flash Point, Grease |
|
ASTM D93 |
Flash Point, Pensky-Martins Closed Cup |
|
ASTM D156 |
Color (Saybolt Chromometer Method) |
|
ASTM D240 |
Gross Heat of Combustion (Specify BTUs/gallon or /pound) |
|
ASTM D287 |
API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) |
|
ASTM D323 |
Reid Vapor Pressure |
|
ASTM D566 |
Dropping Point Grease |
|
ASTM D892 |
Foaming, Sequence I - III (Specify option A if required) |
|
ASTM D892 & D6082 |
Foaming, Sequence I - IV (Specify option A if required) |
|
ASTM D924 |
Dissipation/Power Pactor |
|
ASTM D972 |
Evaporation Loss (Grease) - Specify Time & Temperature |
|
ASTM D1120 |
Boiling Point of Coolants |
|
ASTM D1177 |
Freeze Point of Aqueous Engine Coolants |
|
ASTM D1218 |
Refractive Index & Refractive Dispersion |
|
ASTM D1298 |
Density / API Gravity, Hydrometer |
|
ASTM D1331 |
Surface and Interfacial Tension |
|
ASTM D1401 |
Emulsion Characteristics / Water Separability |
|
ASTM D1401 |
Emulsion Characteristics / Water Separability |
|
ASTM D1403 |
Cone Penetration, 1/4 or 1/2 Scale |
|
ASTM D1404 |
Harmful Particles in Grease |
|
ASTM D1500 |
Color |
|
ASTM D1742 |
Oil Separation, Storage of Greases |
|
ASTM D1768 |
Water & Sediment for Opaque or In-Service Oils |
|
ASTM D2008 |
UV Absorbance to Absorptivity |
|
ASTM D2155 |
Auto-Ignition Temperature (Hydraulic Fluids) |
|
ASTM D2265 |
Dropping Point |
|
ASTM D2500 |
Cloud Point |
|
ASTM D2595 |
Evaporation Loss, Grease, Wide Temperature Range |
|
ASTM D2709 |
Water & Sediment |
|
ASTM D2717 |
Thermal Conductivity |
|
ASTM D2879 |
Vapor Pressure by Isoteniscope, Single Temperature |
|
ASTM D2879 |
Vapor Pressure by Isoteniscope, Multiple Temperatures |
|
ASTM D3427 |
Air Release / Gas Bubble Separation |
|
ASTM D3520 |
Quenching Time |
|
ASTM D4052 |
Specific Gravity (Includes API Gravity) |
|
ASTM D5800 |
Noack Volatility |
|
ASTM D6082 |
Foaming, Sequence IV (Specify option A if required) |
|
ASTM D6184 |
Oil Separation %, Wire Cone Method |
|
ASTM D6217 |
Particulate Contamination for Diesel Fuels |
|
ASTM D6371 |
Cold Filter Plug Point |
|
ASTM D6375 |
Noack Volatility by TGA |
|
ASTM D6417 |
Simulated Distillation by Gas Chromatography |
|
ASTM D6793 |
Bulk Modulus, Up to 80°C |
|
ASTM D6922 |
Homogeneity & Miscibility |
|
ASTM D7213 |
Boiling Range Distribution of Petroleum Distillates (100°C to 615°C) |
|
ASTM D7321 |
Particulate Contamination for Biodiesel Fuels |
|
ASTM D7619 / ISO 4406 |
Particle Count & Sizing (Diesel Fuels) |
|
ASTM E659 |
Auto-Ignition Temperature, Liquid Chemicals |
|
ASTM E1269 |
Specific Heat |
|
ISO 4406 |
Particle Count |
|
SAVLAB APP |
Appearance |
|
SAVLAB LPYC |
Density, Pycnometer |
|
SAVLAB MIC |
Microscopy |
|
SAVLAB PH |
pH Determination |
|
SAVLAB RBP |
Reflux Boiling Point |
|
SAVLAB TGASCAN |
TGA Thermal Scan or Isotherm |
|
Molecular Characterization |
|
|
ASTM D94 |
Saponification Number |
|
ASTM D189 |
Carbon Residue, Conradson |
|
ASTM D482 |
Total Ash |
|
ASTM D524 |
Carbon Residue, Ramsbottom |
|
ASTM D611 |
Aniline Point |
|
ASTM D613 |
Cetane Number |
|
ASTM D664 |
Acid Number |
|
ASTM D874 |
Sulfated Ash |
|
ASTM D893 |
Insolubles, Pentane |
|
ASTM D974 |
Acid Number |
|
ASTM D974 |
Base Number |
|
ASTM D976 & D4737 |
Cetane Index (Calculated from D1298 & D86) |
|
ASTM D1319 |
Hydrocarbon Type |
|
ASTM D1662 |
Sulfur, Active |
|
ASTM D1957 |
Hydroxyl Number |
|
ASTM D2007 |
Clay Gel Analysis |
|
ASTM D2273 |
Trace Sediment |
|
ASTM D2622 |
Sulfur by XRF - Wavelength Dispersive |
|
ASTM D2699 |
Octane Number (Research Rating – RON) |
|
ASTM D2700 |
Octane Number (Motor Rating – MON) |
|
ASTM D2887 |
Gas Chromatography - Carbon Distribution |
|
ASTM D2896 |
Base Number |
|
ASTM D2982 |
Glycol |
|
ASTM D3238 |
Carbon Distribution Analysis |
|
ASTM D3703 |
Peroxide Value |
|
ASTM D4291 |
Glycol |
|
ASTM D4294 |
Sulfur by XRF - Energy Dispersive |
|
ASTM D4530 |
Carbon Residue, Micro |
|
ASTM D4629 |
Nitrogen by Chemiluminescence |
|
ASTM D4737 |
Cetane Index (Calculated from D1298 & D86) |
|
ASTM D4739 |
Base Number |
|
ASTM D4927 |
Sulfur Content for Automatic Transmission Fluid by XRF |
|
ASTM D4951 |
Elemental Analysis by Inductively Coupled Plasma, Wear Metals |
|
ASTM D5185 |
Elemental Analysis by Inductively Coupled Plasma (No S) |
|
ASTM D5185 |
Sulfur by Elemental Analysis by Inductively Coupled Plasma |
|
ASTM D5186 |
Aromatics in Diesel Fuel |
|
ASTM D5291 |
Carbon Hydrogen Nitrogen Content |
|
ASTM D5291 |
Nitrogen - Carlo Erba |
|
ASTM D5453 |
Sulfur |
|
ASTM D5453 & D5762 |
Sulfur & Nitrogen Package |
|
ASTM D5554 |
Iodine Value |
|
ASTM D5762 |
Nitrogen |
|
ASTM D5769 |
Benzene, Toluene, Total Aromatics by GC/MS |
|
ASTM D5827 |
Sulfate Analysis (SO4) |
|
ASTM D6130 |
Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements |
|
ASTM D6304 |
Water by Karl Fischer |
|
ASTM D6443 |
Chlorine - XRF Wavelength Dispersive |
|
ASTM D6560 |
Asphaltene Content |
|
ASTM D7214 |
FTIR Analysis, Oxidation by Peak Area Increase |
|
ASTM D7317 |
Pentane Insolubles by Filtration |
|
ASTM D7371 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
ASTM D7412 |
FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear |
|
ASTM D7415 |
FTIR Analysis, In-Service Fluid, Sulfate Content |
|
ASTM D7624 |
FTIR Analysis, In-Service Fluid, Nitration |
|
ASTM D7844 |
FTIR Analysis, In-Service Fluid, Soot |
|
ASTM E1131 |
TGA Soot |
|
ASTM E2412 |
FTIR Analysis, In-Service Fluid |
|
EN 14078 |
FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil |
|
EPA Test 24 |
Volatile Organic Content (VOC) |
|
IP 346 |
PCA - Polycyclic Analysis |
|
SAVLAB IR |
Fourier Transform Infra-Red, FTIR, Spectra Only |
|
SAVLAB IRG |
Fourier Transform Infra-Red, FTIR, Glycol Analysis |
|
SAVLAB IRW |
Fourier Transform Infra-Red, FTIR, Water Analysis |
|
SAVLAB SFACALC |
Sulfated Ash, Calculated from ICP Results |