PPE scope |
1. EYE PROTECTION EQUIPMENT |
1.1 Glasses with or without side protection БДС EN 166:2003 1.2 Safety glasses "Closed type" БДС EN 166:2001 1.3 Face shields БДС EN 166:2001 |
2. RESPIRATORY PROTECTIVE EQUIPMENT |
2.1 Full masks БДС EN 136:2002 БДС EN 136:2002/AC:2002 2.2 Half masks and quarter masks БДС EN 140:2003/AC:2003 БДС EN 140:2003 2.3 Filtering half masks to protect against particles (disposable and reusable) БДС EN 149:2001+А1:2009 2.4 Filtering half masks with valves - gas protective and combined БДС EN 405:2001+A1:2009 2.5 Half masks without inhalation valves and with replaceable filters – gas protective or combined, or for protection against particles only БДС EN 1827:1999+A1:2009 2.6. Particulate filters БДС EN 143:2002 БДС EN 143:2002 БДС EN 143:2002/AC:2006 БДС EN 143:2002/A1:2006 2.7 Gas protective and combined filters БДС EN 14387:2004+A1:2008 |
3. EQUIPMENT PROVIDING GENERAL BODY PROTECTION (CLOTHES) |
3.1 Protective clothing. БДС EN ISO 13688:2013 3.2 Protective clothing against solid, liquid and gaseous chemical products, including liquid and solid aerosols. Suits type 1 for protection against chemical products БДС EN 943-1:2015+A1:2019 3.3. Protective clothing against liquid chemical products (equipment type 6 and type PB [6]) БДС EN 13034:2005+A1:2009 3.4. Protective clothing against liquid chemicals impermeable to liquids (type 3) and aerosols (type 4), including those providing protection only to body parts (type PB [3] and type PB [4]) БДС EN 14605:2005+A1:2009 3.5. Protective clothing for use against solid particles БДС EN ISO 13982-1:2005 3.6 Protective clothing against infectious agents БДС EN 14126:2004+AC:2004 |
4. EQUIPMENT PROVIDING HAND PROTECTION |
4.1 Protective gloves БДС EN ISO 21420:2020 4.2 Protective gloves against hazardous chemicals and microorganisms. БДС EN ISO 374-1:2017 БДС EN ISO 374-1:2016/A1:2019 4.3 Protective gloves against dangerous microorganisms БДС EN ISO 374-5:2017 4.4 Gloves for protection against mechanical hazards БДС EN 388:2016+A1:2019 |
5. EQUIPMENT PROVIDING PROTECTION AGAINST FALLING FROM HEIGHT |
5.1 Anti-fall brakes with a guide on a rigid safety line БДС EN 353-1:2014+A1:2018 5.2 Anti-fall braking devices with flexible safety line guide БДС EN 353-2:2003 5.3 Safety ropes БДС EN 354:2010 5.4 Energy absorbers БДС EN 355:2003 5.5 Retractable anti-fall brakes БДС EN 360:2003 5.6 Seatbelts for the whole body БДС EN 361:2003 5.7 Connectors БДС EN 362:2005 5.8 Security devices БДС EN 795:2012 (type B and F) |
No. | Tested products | Type of testing | Method of testing (standardized/validated) |
1 | 2 | 3 | 4 |
1 |
Machinery, equipment and devices Hand and portable instruments (tools) |
Sound pressure level |
EN ISO 11201 EN ISO 11202 EN ISO 11203+A1 EN ISO 11204 EN 150 22868, p. 5, Annex A EN ISO 16056 EN tS0 9902-1+A1 +A2, p. 6 EN 12545+A 1 EN 12053+A1, p. 6.3.1 EN ISO 20361 +A 1 1, p. 6, p.7, p. 8 EN ISO 1680 EN 60745-1, p. 6.1 EN 62841-1 +AC, Annex I EN 60745-2—13+A1, p. 6 EN 61029-1 +A11 +A12, p.13.2 EN ISO 2151 |
EN 60076-10 ENISO 15744 BISO 7960 EN 1870-5+A2 p. 5.3.215471 ISO 8297 |
|||
Sound power levels |
EN ISO 3744 EN ISO 3746 ISO 22868, p. Annex A, B EN 12545 + A1 EN 12053 + A, p. 6.3.2 EN ISO 20361 + A11, p. 5, 7, 8 EN IS0 1680 EN 60745-1, p. 6.1 EN 62841-1 + AC, Annex I EN 60745—2-13 + A, p. 6, Annex A EN 61029-1 + All + A12, p. 13.2 EN ISO 2151 EN 60076-10 ISO 7960 EN ISO 15744 EN 1870-5 + A2, p. 5.3.2 ISO 8297 |
||
Vibrations |
EN ISO 5349-1 EN ISO 5349-2 + A1 EN 1032 + A1 EN ISO 20643 + A1 11663, p. 2.2 ISO 10816-1 EN 10326-1 EN ISO 7096 EN ISO 263 1-1 EN ISO 28927-10 EN 13059 + A1 EN 60745-1, p. 6.2 EN 62841-1 + AC, Annex I EN 60745-2-13 + A1, p. 6.2, Z 101 EN ISO 22867 |
||
Temperature (Heating) |
EN 60974-1, p. 7 EN 60745-1, p. 12 EN 62841-1 +AC, p. 12 EN 61029-1+ A11 + A12 and Part 2, p. 11 |
||
Resistance to abnormal heat. Ball pressure test method (Resistance to heat) |
EN 60695-10-2 EN 60745-1, p. 29.1 EN 62841-1 + AC, p.13.1 EN 61029-1 + A11 + A12, p. |
||
Resistance to flammability and fire. Glow-wire flammability test method |
EN 60695-2-10 EN 60695-2-11 60695-2-12+A1 EN 60695-2-13+A1 EN 60745-1, p. 29.2 EN 62841-1+AC, p. 13.2 |
||
Resistance to flammability and fire. Needle-flame test method | EN 60695-11-5 | ||
I Iluminance | EN 1837+A1 | ||
Protection against ingress of foreign bodies and moisture resistance. (IP- code) |
EN 60529+A1 EN 60034-5 EN 60745-1, p.14 EN 62841-1 +AC, p.14.2 |
||
Continuity of the protective bonding circuit (Provision for earthing) (Resistance between the earthing terminal and accessible parts} |
EN 60204-1 +A1, p.18.2.2(1) EN 60204-32, p.18.2.2(1) EN 60974-1, p.10.4.4 EN 60745-1, p.26 EN 62841- 1 +AC, p.26 EN 61029-1 +A11 +A12 and Part 2, 25 |
||
Fault loop impedance |
EN 60204-1+AI, p.18.2.2(2) EN 60204-32, p.18.2.2(2) |
||
Insulation resistance |
EN 60204-1 +A1, p.18.3 EN 60204-31, p.18.3 EN 60204-32, p.18.3 EN 61029-1+AI1 +A12 and Part 2, p.15.2 EN 60974-1, p.6.1.4 |
||
Electric strength /VoItage tests (Dielectric strength of the insulation) |
EN 60204-1 +A1, p.18.4 EN 60204-31, p.18.4 EN 60204-32, p.18.4 EN 60974-1, p.6.1.5 EN 61439-1, p.10.9.2 EN 61180-1 EN 60745-1, p.15 EN 62841-1+AC, Annex D EN 61029-1+AI1 +A12 and Part 2 .15.3 |
||
Protection against residual voltages |
EN 60204-1 +A1, p.18.5 EN 60204-32, p.18.5 EN 60974-1, p.6.2.3 EN 60745-1, p.21.21 EN 62841-1+AC, p.21.21 EN 61029-1+A1 1+A12 and Part 2, p.8.6 |
||
Creepage distance clearances and distances through insulation |
EN 60664-1 EN 60335-1 +A1 1+A+A 12 +A13+A1+A2+A14, p.29 EN 60974-1, p.6.1.2, 6.1.3 EN 60745-1, p.28 EN 62841-1 +A, p.28 EN 61029-1+A11 +A12 and Part 2, p.27 |
||
Voltage |
EN 60204-1 +A1, p.9.4.3 EN 60204-31, p.7.5 EN 60204-32, p.9.4.3 b EN 60974-1, p.10.1,11.1 EN 60335-1 +A1 1+AC+A12+A13+A1 +A2 +A14, p.10 EN 60745-1, p.5.7.2 EN 62841-1+AC, p.11 EN 61029-1+A1 1 +A12 and Part 2, p.10 |
||
Power input |
EN 60335-1 +A11+AC+A12+A13+A1 +A2+A14, p.10 EN 60745-1, p.11 EN 62841-1+AC, p.11 EN 61029-1+A1 1+A12 and Part 2, p.10 |
||
Current |
EN 60335-1+AI1 +AC+A12 +A13 +A1 +A2 +A14, p.10 EN 60974-1, p.7 EN 60745-1, p.11 EN 62841-1 +AC, p.11 EN 61029-1 +A11+A12, p.10 |
||
Leakage current |
EN 60335-1+A11 +AC+A12+A13+ A1 +A2 +A14, p.13.2, 16.2 EN 60974-1, p.6.3.7 EN 60745-1, p.13 EN 62841-1+AC, Annex C EN 61029-1 +A1 1+A12 and |
||
Touch current, protective conductor current |
EN 60990 | ||
Environmental testing - Test A: Cold |
EN 60068-2-1 | ||
Environmental testing - Test B: Dnyheat |
EN 60068-2-2 | ||
Environmental testing - Test N: Change of temperature |
EN 60068-2- 14 | ||
Environmental testing - Test Cab: Damp heat, steady state |
EN 60068-2-784975 | ||
Environmental testing - Test Db: Damp heat, cyclic |
EN 60068-2-30 | ||
Environmental testing - Test Eh: Hammer tests Degrees of protection against external mechanical impacts (IKcode) |
EN 60068-2-75 EN 62262 EN 50102 |
||
Mechanical strength |
EN 60745—1, p.20 EN 62841-1+AC, p.20 |
||
Resistance to ding, tensile and torsional for power cords |
EN 60745-1 p.24.12, 24.13,24.14 EN 62841-1+AC, p.24 EN 61029-1+A11+A12 and Part 2, p.23.5, 23.6 |
||
2 |
Electric and electronic equipment, appliance device apparatu equipment and systems |
Protection against ingress of foreign bodies and moisture resistance. (IP- code) |
EN 60529+A1 EN 60034-5 |
Environmental testing - Test Eh: Hammer tests Degrees of protection against external mechanical impacts (IK code) |
EN 6006B-2-75 EN 62262 EN 50102 |
||
Resistance to heat (Resistance to abnormal heat - Ball pressure test method |
EN 60695-10-2 | ||
Resistance to flammability and fire. (Glow-wire flammability test method) |
EN 60695-2-10 EN 60695-2-11 EN 60695-2-12 +A1 EN 60695-2-13 +A1 |
||
Resistance to flammability and fire. (Needle-flame test method) |
EN 60695-11-5 | ||
Resistance to tracking |
EN IEC 60112 C 7230 |
||
Electric strength /Voltage tests/ (Dielectric strength of the insulation} |
EN 61180-1 | ||
Creepage distance clearances and distances throughinsulation |
EN 60664-1 | ||
Touch current, protective conductor current |
EN 60990 | ||
Environmental testing - Test A: Cold |
EN 60068-2-1 | ||
Environmental testing -Test B: Dry heat | EN 60068-2-2 | ||
Environmental testing - Test N: Change of temperature |
EN 60068-2-14 | ||
Environmental testing - Test Cab: Damp heat, steady state |
EN 60068-2-78 4975 |
||
Environmental testing - Test Db: Damp heat, c'ycIic |
EN 60068-2-30 | ||
Electromagnetic compatibility |
EN 12015 EN 12016 EN 60974-10 +A1 |
||
Disturbance voltages |
55016-2-1 EN 5501 1+A1+A11, p.7, 8.2 EN 55032+AC+A1 1+A1, p.6.3 EN 55014-1, p.5 EN IE55015, p.8 |
||
Disturbance power |
EN 55016-2-2 fi,EN 55014- l +AII, P.6 |
||
Radiated electromagnetic disturbances | EN IE55015, Annex B | ||
Harmonicurrent emissions |
EN IE 61000-3-2 | ||
Voltage fluctuations and flicker |
EN 61000-3-3+A1 | ||
Electrostatidischarge immunity |
EN 61000-4-2 | ||
Pulse magnetic field immunity |
EN 61000-4-8 | ||
Voltage dip short interruptions and voltage variations immunity |
EN IE61000-4-1 1 | ||
3 |
Household and similar electrical appliances and automatielectrical controls for them |
Protection against access to live parts |
EN 603351+A:t1+AC+A12+A13+A1+A2 +A14 and Part 2, p.8 EN 60730-1 and Part 2, p.8 |
Power input | EN 60335-1 +A11+AC+A12+ A13+A 1 +A2+A14 and Part 2, p.10 | ||
Current |
EN 60335-1+A11+AC+A12+A13+A1+A2 +A14 and Part 2, 10 |
||
Heating / Temperature under normal and abnormal operation |
EN 60335-1+A11+AC+A12+A13+A1+A2 +A14 and Part 2, p.11,17,19 EN 60730-1 and Part 2, p.14, 27 |
||
Leakage current | EN 60335-1+A11 +AC+A12 +A13 +A1 +A2 +A14, and Part 2, p.13.1, 13.2, 16.1, 16.2 | ||
EN 60730-1 and Part 2, p.13.3 |
|||
Touch current | EN 60990 | ||
Protection against ingress of foreign bodies and moisture resistance. (IP- code) |
EN 60335-1+AI 1+AC+A12 +A13 +A1 +A2 +A14, and relevant Part 2, p,15 EN 60730-1 and Part 2, p.12 EN 60529+A1 |
||
Insulation resistance |
EN 60730-1 and Part 2, p.13.1 |
||
Electric strength (Dielectric strength of the insulation) |
EN 60335- 1+A11+AC+A12+A13+A1+A2 +A14 and Part 2, p.p.13.3, 16.3 EN 60730-1 and Part 2, p.13.2 |
||
Protection against residual voltages |
EN 60335-t +A11+AC+A12+A13+A1+A2 +A14 and Part 2 p.22.5 |
||
Mechanical strength and stability |
EN 60335-1+A11+AC+A12+ A13+A1+A2 +A14, and Part 2, p.20, p.21 BMC EN 60730-1 and relevant Part 2, p .18 |
||
Resistance to force and torque |
EN 60335-t +A11+AC+A12+A13+A1+A2 +A14 and Part 2, p.22.3, 22.11, 28.1 EN 60730-1 and relevant Part 2, p.19.1 |
||
Resistance to ding, tensile and torsional for power cords |
EN 60335-1+A11+AC+A12+A13+A1+A2 +A14 and Part 2, p.25.15 EN 60730-1 and Part 2, p.11.7 |
||
Provision for earthing (Resistance between the earthing terminal and accessible parts) |
EN 60335-1+A11+AC+A12+A13 +A1+A2 +A14 and Part 2, p.27 EN 60730-1 and Part 2, p.9 |
||
Creepage distance clearances and distances through insulation |
EN 60335-t+A11+AC+A12+A13+A1+A2 +A14 and Part 2, p.29 EN 60730-1 and Part 2, p.20 |
||
Electromagnetic compatibility |
EN 55014-1+AII EN 55014-2 EN IEC 61000-3-2 EN 61000-3-3+A1 EN 60730-1, p.23, H26 EN 55032 +AC+A11+A1, p.6.3 EN 55020+A11+A12 |
||
Resistance to heat (Resistance to abnormal heat - Ball pressure test method) |
EN 60335-1 +A 1 1 +AC+A12+A13+A1 +A2 +A14 and Part 2, p.30.1 EN 60730-1 and Part 2, p.G.5 EN 60695-10-2 |
||
Resistance to flammability and fire. (Glow-wire flammability test method] |
EN 60335-1+A1 1 +AC+A1 2+A 13+A 1 +A2 +A14 and relevant Part 2, p.30.2 EN 60730-1 and relevant Part 2, p.21.2 EN 60695-2-10 EN 60695-2-1 1 EN 60695-2-12 +A1 EN 60695-2-13+A1 |
||
Resistance to flammability and fire. (Needle-flame test method) |
EN 60335-1 +A1 1 +A +A12 +A13 +A1 +A2 +A14, and relevant Part 2, p.30.2.4, Annex E EN 60695 +AAB Annex G |
||
Resistance to tracking |
EN 60335-1 +A11 + AC+A12+ A13 +A1 +A2 +A14, and Part 2, Annex N EN 60730-1 and Part 2, p.21.2.7 BI EN IE60112 |
||
4 | Luminaires |
Protection against electric shock |
EN 60598-1+A+A+A1, p.8 |
Protection against residual voltages |
EN 60598-1 +A+A+A1, p.8.2.7 |
||
Humidity resistance | EN 60598-1 +AC+AC+A1, p.9.3 | ||
Protection against ingress of foreign bodies and moisture resistance. (IP-code) |
EN 60598-1 +A+A+A1, p.9.2 | ||
Insulation resistance |
EN 60598-1 +AC+A+A1, p.10.2.1 |
||
Electric strength (Dielectric strength of the insulation) |
EN 60598-1+AC+A+A1, p.10.2.2 |
||
Protective conductor current |
EN 60598-1+A+A+A1, p.10.3 |
||
Touch current |
EN 60598-1+AC+AC+A1, p.10.3 |
||
Provision for earthing (Resistance between the earthing terminal and accessible parts) |
EN 60598-1+AC-FAC+A1, p.7 | ||
Creepage distance clearances and distances throurth insulation |
EN 60598-1+AC+AC+A1, p.A1 | ||
Check the pulse ignition | EN 60598-1 +AC+AC+A1.4.4.5 | ||
Electromagnetic compatibility |
EN IE 55015 EN 61547 EN IE 61000-3-2 EN 61000-3-3+A1 |
||
Heating (Temperature) under normal and abnormal operation |
EN 60598-1+AC+AC+A1, p.p.12.4, 12.5, 12.6,12.7 |
||
Endurance |
EN 60598-1+AC+AC+A1, p.12.3 |
||
Resistance to overturned | EN 60598-2-4, p.4.6.3 | ||
Mechanical strength Impact energy: - from spring hammer - from pendulum - from falling sphere - from rotating carousel - from falls from height |
EN 60598-1+AC+AC+A1,p.4.13 | ||
Resistance to force and torque: - suspensions and means of adjustment (load mas wind, console bracket etc.) - lamp holders - screw mechanical connections and glands |
EN 60598-1 +AC+AC+AI, p.p.4.12, 4.14 EN 60598-2-3 +A1, p.3.6.3 EN 60598-2-5, p.5.6.5 |
||
Resistance to tensile and torsional for power cords |
EN 60598-1 +AC+AC+A1, p.5.2.10 |
||
Resistance to vibrations |
EN 60598-1 +AC+AC+A1, p.4.20 |
||
Resistance to heat (Resistance to abnormal heat. Ball pressure test method) |
EN 60598-1+AC+AC+A1, p.13.2 |
||
Resistance to flame and ignition (Resistance to flammability and fire. Glow-wire flammability test method) |
EN 60598-1+AC+AC+A1, p.13.3.2 |
||
Resistance to flame and ignition (Resistance to flammability and fire. NeedIe-flame test method) |
EN 60598-1+AC+AC+A1, p.13.3.1 | ||
Resistance to tracking |
EN 60598-1+AC+AC+A1, 13.4 |
||
5 |
Wiring device lamp holder lamps and Lamps control gear |
Protection against electric shock Protection against access to live parts |
EN 61347-1+AI and the relevant Part 2, p.10.1 IE60238, EN 60998-1, p.9 EN 61058-1+A2, p.9 EN 60669-1+AC, p.10 EN 60669—2—1+AI +A12,p.10 EN 61199 +A1+A2, p.2.6 60968+AC, p.6 17183, p.9.1 IE 60884-1 +A 1+A2, p.10.1 |
EN 61316, p.9BI EN 61242+ A1+A2, p.B EN 60670-1+A1, p.10 | |||
Protection aga inst residual volt es |
EN 61347-1 +À1 and the relevant Part 2 p.10.2 |
||
Humidity resistance |
EN 61347-1+AI and the relevant Part 2 p.11 EN IE 60238, p.14.3 EN 60998-1, p.12.2 EN 61058-1+A2, p.14.4 60669-1 +AC, p.15.3 EN 60968 +AC, p.7.1 EN 62560 +A 1 +AC+AI1, p.8 17183, p.15.3 IE60884-1+A1+A2, p.16.3 EN 61316, p.18.5 EN 61242+A1 +A2, p.16 EN 60670-1+AI, .14.1 |
||
Insulation resistance |
EN 61347-1+AI and the relevant Part 2 p.11 EN IE 60238, p.14.4 EN 60998-1, p.13.3 EN 61058-1 +A2, p. 15.2 BI EN 60669-1+AC, p.16.1 EN 6119S+A1+A2, p.2.4 EN 61199+A1 +A2, p.2.4 EN 60968+AC, p.7.1 EN 62560 +A1 +AC+A1 1, p.8.2 17183, p.16.1 IE60884-1 + AI + A2, p.17.1 EN 61316, p.19.2 EN 61242+A1+A2, p.17.1 6 tC EN 60670-1+AI, p.14.2 |
||
Electric strength tDielectric strenqth of the insulation) |
EN 61347-1+Al and the relevant Part 2 p.12 EN IE60238, p.14.4 EN 60998-1, p.13.4 EN 61058-1 +A2, p.15.3 EN 60669-1 +AC, p.16.2 EN 61195 +A1+A2, p.2.5 EN 61199 +A1 +A2, p.2.5 EN 60968 +AC, p.7.2 EN 60598-1+AC+AC+AI, p.10.2.2 17183, p.16.2 IE 60884-1 +A1+A2, p.17.2 EN 61316, p.19.3 EN 61242+A1+A2, p.17.2 EN 60670-1+AU.14.3 |
||
Provision for earthing (Resistance between the earthing terminal and |
EN 61347-1+AI and the relevant Part 2 p.9 EN 61058-1 +A2, p.10.4 |
||
accessible parts) |
EN 60669-1+AC, p.11.4 6flC 17183, p.10.5 IE 60884-1+A1+A2, p.11.5 EN 613 16, p. 10.4 EN 61242+A1+A2, p.9.7 EN 60670-1 + A1, p.11.1 |
||
Creepage distance clearances and distances through insulation |
EN 61347-1 +A1, and the relevant Part 2 p.16 EN IE 60238, p.17 EN 60998-1, p.17 EN 61058-1 +A2, p.20 EN 60669-1 +AC, p.23 EN 60669-2-1 +A1 +A12, EN 61195 +A1 +A2, p.2.8 EN 61199 +A1 +A2, p.2.8 17183, p.2.6 IE 60884-1 +A1 +A2, p.2.7 EN 6 1242 + A1+ A2, p.2.4 |
||
Check the pulse ignition |
EN 61347-2-1 +A1 +A2, p.16 |
||
Electromagnetic compatibility |
EN IE 55015 +A1 | ||
EN 61547 | |||
EN IE61000-3-2 | |||
EN 61000-3-3+A1 | |||
EN 60669-2-1+A1 +A12 | |||
Dimensions (Interchangeability) |
EN IE60238, p.8 EN 60669-1 +AC, p.9 EN 61195 +A1 +A2, p.2.3.2 EN 60968 +AC, p.5.1 EN 62560 +A1 +AC +A11,p.6.1 |
||
17183, p.8 IE60884-1 +A1 +A2, p.9 |
|||
Voltage |
61347-1 +A1 and the relevant Part 2 q.20, H.2 |
||
Brea king capacity |
EN 60669-1 +AC, p. 18, p.19 EN 60669-2-1 +A1 +A12, p. 18, 19 EN 60669-2-3, p. 18, 19 17183, p. 19, 20 IE 60884 +A1 +A2, p. 20, p.21 |
||
Temperature (Heating) (under normal and abnormal operation) |
EN 60998-1, p.1"5 EN 61058-1 +A2, p.16 EN 60669-1 +AC, p.17 EN 60669-2-1 +A1 +A12,p.17 EN 61195 +A1 +A2, p.2.9 Annex B EN 61199 +A1 +A2, p.2.9 EN 60968 +AC, p.9 EN 62560 +A1 + A+A11, |
||
IEC 60884-1 +A1 +A2, p.19 EN 61316, EN 61242 +A11 +A12 +A1.19, 20 |
|||
Thermal endurance (Resistance to heat) |
EN 61347-1 +A1 and the relevant Part 2 p.13 EN 60998-1, p.16.2 EN IEC 60238, p.19 |
||
Mechanical strength Impact energy: - from spring hammer - from pendulum - from falling sphere - from rotating carousel - from falls from height |
EN IEC 60238, p.15 EN 60998-1, p.14 EN 61058-1 +A2, p.18.2 EN 60669-1 +AC, p.20.1 17183, p.23 IEC 60884-1 +A1 +A2, p.24 6,L\C EN 61316, p.24 EN 61242 +A1 +A2, p.21 EN 60670-1 +A1, p.15 |
||
Resistance to tensile and torsional for power cords and wires |
17183, p.22 IEC 60884 +A1 +A2, p.23 EN 61316, p.23 EN 61242 +AII +A12 +A1,p.11 |
||
Resistance to force and torque for screw mechanical connections and cables |
EN 61347-1 +A1 and the relevant Part 2 p.17 EN IE60238, p.15.2 EN 61058-1 +A2, p. 18.2, 18.4, 19.2.4, 19.2.5 EN 60669-1 +AC, p. 12.2.5, 12.2.6, 20.3, 20.9 EN 61195 +A1 +A2, p.2.3 EN 61 199 +A1 +A2, p.2.3 EN 60968 +AC, p.8 EN 62560 +A1 +A+A11,p.9 17183, p.11.2.6 IE60884—1 +A1 +A2, p.\ 2.2.6 |
||
Resistance to heat (Resistance to abnormal heat - Ball pressure test method) |
EN 61347-1 +A1 and the relevant Part 2 p.18.1 EN IE 60238, p.20.1 EN 60998-1, p.16.3 EN 60669-1 +AC, p.15.1p.21 EN 61195 +A1 +A2, p.2.7.2 EN 61199 +A1 +A2, p.2.7.2 EN 60968 +AC, p.10 EN 62560 +A1 +A+A11,p.11 17183, p.24 IE60884-1 +A1 +A2, p.25 EN 61242 +A11, +A12 +A1 p.22 EN 60670-1 +A1, p.16 |
||
Resistance to flame and ignition (Resistance to flammability and fire. Glow-wire flammability test method) |
EN 61347-1 +A1, and the relevant Part 2 p.18.3 EN IE 60238, p.20.3 EN 60998-1, p.18 BI EN 61058-1 +A2, p.21,Annex C EN 60669-1 +AC, p.24.1.1 EN 61195 +A1 +A2, p.2.7.4 EN 61 199 +A1 +A2, p.2.7.4 EN 60968+AC, p.11 EN 62560 +A 1+AC +A 11,p. 12 17183, p.27.1 IE60884-1 +A 1+A2, p.28.1 EN 61242 +AII +A12 +A1, p.25.1 EN 60670-1 + A1,Q.18 |
||
Resistance to flame and ignition (Resistance to flammability and fire. Needle-flame test method) |
EN 61347-1+A1 and the relevant Part 2 p.18.4 EN IE60238, p.20.4 |
||
Resistance to tracking |
EN 61347-1+AI and the relevant Part 2 p.18.5 EN IE60238, p.20.5 EN 60998-1, p.19 EN 61058-1+A2, Annex D 17183, p.27.2 IE60884-1+A1+A2, p.28.2 EN 61242+A 11 +A 12 +A1, p.25.2 EN 60670-1+AU p.19 |
||
6 |
Electrical equipment for measurement, control, laboratory use and Information technology equipment. Audio, video and similar elec roni a aratus |
Protection from electric shock and energy hazards (Protection against access to live parts) |
EN 61010-1+A1 and the relevant Part 2 p.6.2 EN 62368-1+AI 1+AC, p.5.3.2 Annex V |
Protection against residual voltages |
EN 61010-1 +A1 and the relevant Part 2 p.p.6.3 6.6.2 |
||
Humidity resistance |
EN 61010-1 +A1 and the relevant Part 2 p.6.8.2 EN 62368-1 +A11 +AC, p.5.4.8 |
||
Electric strength (Dielectristrength of the insulation) |
EN 6 10 10-1 +A1 and the relevant Part 2, p.6.8.3 EN 62368-1+A1 1 +AC, p.5,4.9 |
||
Protective earthing Protective impedance (Protective earthing conductors and protective bondinc}conductors) |
EN 61010-1 +A1 and the relevant Part 2 p.6.5.4 EN 62368-1+A1 1+AC, p.5.4.2, 5.4.3, 5.4.4 |
||
Creepage distance clearances and distances through insulation |
EN 61010-1+A1 and the relevant Part 2 p.6.7 EN 62368-1 +A11+AC, p. 5.4.2, 5.4.3, 5.4.4 |
||
Voltage |
EN 61010-1+A1 and the relevant Part 2 p.6.3.1 a) EN 62368-1 +A11+AC, p.5.2.2, 5.4. I.8 |
||
Current |
EN 61010-1+A1 and the relevant Pa rt 2 p.6.3.1 b) EN 62368-1 +A11 +AC, p.5.2.2 |
||
Electromagnetic compatibility |
EN 61326-1 +A1 EN 50270 EN 5S011+ A1 + AI 1, p. 7, 8. 2 EN 55032+AC+A11 +A1, p.6.3 EN 55024 +A1 EN IE 6 1000-3-2 EN 61000-3-3+A1 |
||
Temperature |
EN 61010-1 +A1 and the relevant Part 2 p. 10.1, 10.2, 10.3, 10.4 EN 62368-1 +A11+ AC, p.5.4.1.4 |
||
Mechanical strength: Static test Impact test: - from pendulum - from falling sphere - from fails from height |
EN 61010-1+AI and the relevant Part 2 p.p.7, 8 L\EN 62368-1 +A1 1+AC, Annex |
||
Resistance to force and torque for screw mechanical connections and cables |
EN 61010-1+A1 and the relevant Part 2 p.6.5.1.2 |
||
Resistance to tensile and torsional for power cords and wires |
EN 61010-1+A1 and the relevant Part 2 p.6.10.2 EN 62368-1+A1 1+AC, Annex G.7.3 |
||
Resistance to heat (Resistance to abnormal heat - Ball pressure test method) |
EN 61010-1+A1 and the relevant Part 2 p.10.5 EN 62368-1+A1 1 +AC, p.5.4.1.10.3 |
||
Resistance to flame and ignition (Resistance to flammability and fire. Needle-flame test methods |
EN 62368-1+A11+AC, p.6.4 | ||
7 |
Power transformer power supply units and similar devices |
Protection against electric shock (Protection against contact with hazardous live parts\ |
EN jEC 61558-1 and the relevant Part 2 p.9.1 |
Protection against hazardous electrical discharge |
EN IE61558-1 and the relevant Part 2 p.9.2 |
||
Output voltage and output current under load No-load output voltage Short-circuit voltage |
EC 61558-1 and the relevant Part 2 p.p.11, 12, 13 |
||
Electromagnetic compatibility |
EN 61204-3 EN 62040-2 |
||
f1echanical strength: Static test Impact test: - from spring hammer - from rotating carousel - from falls from height |
EN IE61558-1 and the relevant Part 2 p.16 |
||
Resistance to force and torque for screw mechanical connections and cables |
EN IE 61558-1 and the relevant Part 2 p.25 |
||
Current under load and short circuit |
EN IE61558-1 and the relevant Part 2 p.15 |
||
Heating (Temperature) Short circuit and overload protection |
EN IE 61558-1 and the relevant Part 2 p. 14, 15 |
||
Protection against harmful ingress of dust, solid objects and moisture (Degrees of protection (IP codes) |
EN IE61558-1 and the relevant Part 2 p.17.1 |
||
Humidity resistance |
EN IE 61558-1 and Part 2 17.2 |
||
Insulation resistance |
EN IE 61558-1 and Part 2 p.18.2 |
||
Electric strength (Dielectric strength of the insulate |
EN IEC 61558-1 and the 2 p.18.3 |
||
Touch current |
EN IE61558-1 and Part 2 .18.5.1 |
||
Protective conductor current |
EN IE61558-1 and Part 2 p.18.5.2 |
||
Provision for earthing (Resistance between the earthing terminal and accessible parts) |
EN IE61558-1 and Part 2 p.24 |
||
Creepage distance clearances and distances through insulation |
EN IE61558-1 and Part 2 p.26 |
||
Resistance to heat (Resistance to abnormal heat - Ball pressure test method) (Resistance to abnormal heat under fault conditions) |
EN IE61558-1 and Part 2 p.27.1, 27.2 |
||
Resistance fire. (Resistance to flammability and fire. Glow-wire flammability test method) |
EN IE61558-1 and Part 2 p.27.3 |
||
Resistance to tracking |
EN IE61558-1 and Part 2 p.27.4 |
||
8 |
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES Circuit breakers for overcurrent protection for household and similar installations. Residual current operated circuit- breakers. Low- voltage switchgear and controlgear. Pliniature fuses for Low-voltage |
Protection against electric shock and effectiveness of the protective circuit (Resistance between the earthing terminal ¿Ind accessible parts) |
EN 61439-1, p.10.5.2 EN 62208, p.9.10 |
Insulation resistance |
EN 60439-1, p. 11.9 EN 60898-1, p.9.7.2 EN 61008- 1+A 1+A2 +A 11 +A12, p.9.7.2, 9.7.4 EN 61009- 1+A 1+ A2+A11 +A12, p.9.7.2, 9.7.4 |
||
Electric strength (Dielectric strength of the insulation) Protection against harmful |
EN 60439-1, p.10.9.2 EN 62208, p.9.9 EN 60898-1, p.9.7.3 EN 60947-1 A1+A2, p. 8.3.3.4 EN 61008- 1+A 1+A2 +A 11+A12, p.9.7.3, 9.7.4 EN 61009-1+A1+A2+A11 + A12, p.9.7.3 9.7.4 EN 61439-1, p.10.3 |
||
ingress of dust, solid objects and motsture (Degrees of protection (IPcode) | EN 62208, p.9.7 | ||
Creepage distance clearances and distances through insulation |
EN 61439-1, p. 8.3 EN 60898- 1+A1+A11 +A12+A13, p.8.1.3 EN 60947-1+-A1+A2, p.8.3.3.4, Annex G EN 61008-1+A1+ A2+All+A12, p.8.1.3 EN 61009-1+A1 +A2+A1 1 + A12, p.8.1.3 |
||
Temperature (Heating) |
EN 61439-1, p.10.10 EN 60898-1, p.9.8 EN 60947-1+A1 +A2, p.8.3.3.3 EN 60269-1+A1+A2, p.8.3 EN 61008-1+ A1+A2 +A 11+A12, p.9.8 EN 61009-1+ A1 +A2+A11+A12, p.9.8 |
||
Nlechanical and electrical endurance |
EN 60947-2+A1 +A2, p.8.3.3.3 EN 60947-3 +A1 +A2, p.8.3.3.3 EN 60947-4-1 +A1, p.8.2.4.1 EN 60947-5-1 +A1, p. 8.3.3.5.2 EN 60947 5-2 +A1, p.8.5 EN 60898-1 +A1 +A11 +A11 +A12 p.9.11 EN 61009- 1+A1 +A2+A11 +A12 .8.6 |
||
Time-current characteristic |
EN 60898-1, p.9.10 EN 61009 1+A1+A2+A11+A12, p.9.9 EN 60269-1+A1+A2, .8.4.3.3 |
||
Resistance to mechanical loads Mechanical strength: Static test - force Impact test: - from pendulum - from falls from height |
EN 61439-5+AC, p.10.2.101 C EN 62208, p.9.3, 9.5, 9.6 EN 60898-1, p.9.13 C EN 60947-1+ A1+A2, p.8.2.7 EN 61008- 1+A1+A2+A11+A12, p.9.12 EN 61009-1+A1+A2+A11 +A12, p.9.12 |
||
Resistance to force and torque for screw mechanical connections |
EN 60898-1, p.9.4, 9.5 EN 60947-1 +A1+A2, p..8.2.4 |
||
and cables |
EN 61008- 1+A1:06+A11+A12+A13, p. 9.4, 9.5 EN 61009-1 +A1 1 +A12+A13, p. 9.4, 9.5 |
||
Resistance to heat (Resistance to abnormal heat - Ball pressure test method) (Resistance to abnormal heat under fault conditions |
EN 62208, p.9.8.2 EN 60898-1, p. 9.14 EN 61008—1+A1+A2+A11+A12, p.9.13 EN 61009-1+A1+ A2+A1 1 +A12, p.9.14 |
||
Resistance to abnormal heat and fire. (Resistance to flammability and fire. Glow-wire flammabitity test method) |
EN 61439-1, p.10.2.3.2 EN 62208, p.9.8.3 C EN 60898-1, p.9.15 EN 60947-1 -i-A1 +A2, p.8.2.1.1 EN 61008- 1+A1 +A2 +A 11+A1 2, p.9.14 EN 6 1009- 1 +A1 +A2 +A1 1+A12, p.9.15 |
||
Electromagnetic compatibility |
EN 61439-1 p.10.1 2, Annex EN 60947-1+A1 +A2, p.7.3 |
||
9 |
Playground equipment and impact absorbing surfaces for playgrounds and sport |
Impact attenuation of swing seats - peak values of acceleration - surface compression |
EN 1176-2, p.4.6, Annex B |
Critical fall height | EN 1177 | ||
Loads | EN 1176-1, Annex A, Annex | ||
Dimensions - linear - angular - incline |
EN 1176-1, p.p.4.2.3, 4.2.4, 4.2.5, 4.2.6, 4.2.7.5, 4.2.7.6, 4.2.8.2.3, 4.2.8.5, 4.9; 4.2.12, 4.2.13, 4.2.14, 4.2.15 EN 1176-2, p.p.4.2, 4.3, 4.4.1, 4.6.2, 4.6.3, 4.10.2.2, 4.11, Annex B EN 1176-3, p.p.4.2, 4.3, 4.4, 4.5, 4.7, 4.8, 4.9.1 EN 1176-4, p.p.4.4, 4.7, 4.11, 4.12, 4.13, 4.14, EN 1176-5, p.p.4.2, 4.3, 4.5, 5 EN 1176-6, p.p.4.6, 4.7, 4.8, 4.9, 4.10, 5 EN 1176-10, p.p.4.2.2.3, 4.2.2.4, 4.3.5.2, 4.3.5.3, 4. 3. 5.4, 4.4. 1.3, 4.4. 1.4, 4.4.1.5, 4.4.1.8, 4.4.2.5, 4.4.2.7, 4.4.2.8, 4.4.2.12, 4.4.2.13, 4.4.3.5, 4.4.3.6, 4.4.3.7, 4.4.3.8 EN 1176-11, p.p.4.1, 4.2, 4.3 EN 1 177, p.p.4.4.1.3, 4.4.1.4, 4.4.1.5 BI EN 71-1 +A1, p.5.8 |
||
Entrapment |
EN 1176-1, p.p.4.2.7, 4.2.12.2, Annex D EN 1176-3, p.4.4.3 EN 1176-6, Annex E |
||
10 |
Noise in the environment |
Sound pressure levels Equivalent noise level Average noise level on the measurement loop Noise level at the impact site |
ISO 8297 MOZMOSP |
Sound power levels |
ISO 8297 MOZMOSP |
NO. |
Decision
of EC
|
Name and construction products group number according to decision /
product/ /Intended use
|
AVCP system /Body
function
|
Harmonized technical
specification
|
1 | 2 | 3 | 4 | 5 |
1 | 99/469/EC |
Products related to concrete, morta r and grout (2/2), Concrete protection and repair products (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 1504-2:2005 EN 1504-3:2006 EN 1504-4:2005 EN 1504-6:2006 |
2 | 97/740/EC |
Masonry and related products (3/3), Masonry units incorporating thermal insulating materials placed on a face susceptible to be exposed to fire (in walls and partitions subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 15824:2017 |
3 | 96/580/EC |
Curtain wallings (1/1), Curtain wall kits (as external walls subject to reaction to fire requirements) |
system 3 / testing laboratory |
EN 13830:2004 |
4 | 97/462/EC |
Wood-based panels (2/2), Unfaced, overlaid and veneered or coated wood- based panels (for non structural elements in internal or external applications) |
system 3 / testing laboratory |
EN 13986:2004+A1:2O15 |
5 | 95/467/EC |
Gypsum products (1/4), Plasterboards and ceiling elements with thin laminations, fibrous gypsum boards, fibrous gypsum plaster casts, and composite panels (laminates), in which the incorporated material is placed on a face susceptible to be explosed to fire, including relevant ancillary products (in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements |
system 3 / testing laboratory |
EN 520:2004 +AI:2009 EN 13658-1:2005 EN 13658-2:2005 EN 13815:2006 EN 13915:2007 EN 13950:2014 EN 13963:2005 EN 14190: 2015 EN 14209:2017 EN 14353:2007 +AI:2010 EN 14496:2005 EN 15283-1:20O8 +Al:2009 EN 15283-2:20O8 +AI:2009 |
95/467/EC | Gypsum products (2/4), Plasterboards, blocks, ceiling | system 3 / testing | EN 520:2004+AI:2009 | |
elements and gypsum plasters, fibrous gypsum plasters casts, including relevant ancillary products (in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings) |
laboratory |
EN 12859:2011 EN 12860:2003 EN 13279-1:20O8 EN 14195: 2005 EN 14246:2006 |
||
95/467/EC | Gypsum products (3/4), Plasterboards, including relevant ancillary products (for stiffening timber-framed windload bearing walls or timber roof struss structures) | system 3 / testing laboratory |
EN 520:2004 +AI:2009 EN 14190:2O15 EN 14195:2005 EN 15283-1:2008+AI:2009 EN 15283-2:20O8+AI:2009 |
|
6 | 98/437/EC |
Internal and external wall and ceiling finishes (3/5), Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 14716:2006 EN 15102:2007+A1:2O11 |
98/437/EC |
Internal and external wall and ceiling finishes (3/5), Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations) |
system 3 / testing laboratory | EN 13964: 2014 | |
98/437/EC |
Internal and external wall and ceiling finishes (3/5}, Cladding slabs (as external finishes in walls or ceilings subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 1469:2015 EN 14783:2013 |
|
98/437/EC | Internal and external wall and ceiling finishes (3/5, Tiles (as internal or external finishes in walls or ceilings subject to reaction to fire regulations) | system 3 / testing laboratory |
EN 12057:2006 EN 14782:2006 |
|
98/437/EC |
Internal and external wall and ceiling finishes (3/5), Shingles (as external finishes in walls or ceilings subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 12467:2012 EN 16153:2013+A1:2O15 |
|
98/437/EC |
Internal and external wall and ceiling finishes (3/5), Sidings (as internal or external finishes in walls or ceilings subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 534:2006+AI:2010 EN 13245-2:2009 EN 14915:2013 |
|
98/437/EC |
Internal and external wall and ceiling finishes (3/5), Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 438-7:2005 EN 1013: 2012+A1: 2015 EN 14509:2013 EN 15102:2007+A1:2O11 |
|
7 | 2000/245/EC |
Flat g(ass, profiled glass and glass-block products (2/6), Flat or curved glass panels (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 1096-4:2019 EN 1279-5:2018 6,QC EN 14449: 2005 EN 14449:2005 /AC:2006 |
8 | 98/436/EC | Roof coverings, rooflights, roof | system 3 / | EN 494:2012 |
98/436/EC |
Roof coverings, rooflights, roof windows and ancillary products (2/6), Roof windows (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory | EN 14351- I:2006+A2:2016 | |
98/436/EC |
Roof coverings, rooflights, roof windows and ancillary products (2/6), Rooflights (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 1873:2006 EN 14963:2007 |
|
9 | 99/90/EC |
Membranes (1/3), Water vapour control layers (in buildings) |
system 3 / testing laboratory |
EN 13970 :2005 EN 13970 :2005 |
Membranes (2/3), Water vapour control layers (for uses subject to reaction to fire regulations} | system 3 / testing laboratory |
EN 13970:2005 EN 13970:2005 EN 13859-1:2010 EN 13859-2:2010 EN 13984:2013 |
||
Membranes (2/3), Damp proofing sheets (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 13967:2012 EN 13969:2005 EN 13969:2005 |
||
Membranes (2/3), Damp proof courses (for uses subject to reaction to fire regulations) | system 3 / testing laboratory |
EN 14909:2012 EN 14967:2006 EN 15814:2011+A2:2015 |
||
Membranes (2/3), Roof sheets (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 13707:2004+A2:2009 EN 13956:2013 |
||
Membranes (2/3), Water vapour control layers (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 13859-1:2010 | ||
10 | 97/808/EC |
Floorings (2/2), Rigid flooring products< BR>(a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings,wood based products(for internal uses including enclosed publlc transoot premises |
system 3 / testing laboratory |
EN 12057:2006 EN 12058:2006 EN 14342:2013 EN 15285:20O8 |
97/808/EC | Floorings(2/2),Floor screed materials(for lnternal uses) | system 3 / testing laboratory |
EN 13454-1 EN 13813 EN 14016-1 |
|
97/808/EC | Floorings(2/2),Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile,sheet or form (textlle floor coverlng lncluding tiles;plastic and rubber sheets(aminop;astic thermosetting floorings);linoleum and cork;anti-static sheet;floor loose laid tiles;resilient laminated floorings)(for internal uses) | system 3 / testing laboratory |
EN 14041 EN 14904 |
|
11 | 99/91/EC |
Thermal insulating products(1/2), Thermal insulating products (factory-made products and products intended to be formed in-situ) (any) |
system 3 / testing laboratory |
EN 13162:2012+AI:2O15 EN 13163:2012+AI:2O15 EN 13164:2012+AI:2015 EN 13165:2012+A2:2016 EN 13166:2012+A2:2016 EN 14309:2009+AI:2013 EN 14933: 2007 EN 14934:2007 |
99/91/EC |
Thermal insulating products (2/2), Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire) |
system 3 / testing laboratory |
EN 13162:2012+Al:2015 EN 13163:2012+AI:2O15 EN 13164:2012+Al:2015 EN 13165: 2012+A2:2016 EN 13166:2012+A2:2016 EN 13167:2012+Al:2015 EN 13168:2012+AI:2O15 EN 13169:2012+AI:2O15 EN 13170:2012+AI:2015 EN 13171 :2012+AI:2O15 EN 14063-1 :2005 EN 14063-1:2005/ AC:2007 EN 14064-1:2010 |
|
EN 14503+A1 EN 14304+A1 EN 14305+A1 EN 14306+A1 EN 14307+A1 EN 14308+A1 EN 14308+A1 EN 14309+A1 EN 14313+A1 EN 14314+A1 EN 14933 EN 14934 EN 15732 EN 16069+A1 |
||||
12 | 99/470/EC | Construction adhesives(1/2),Adhesives for tiles(for internal and external uses in buildings) | system 3/ testing laboratory | EN 12004+A1 |
99/470/EC | Construction adhesives(1/2),Adhesives for uses subject to reaction to fire regulations) | system 3/ testing laboratory | EN 12004+A1 | |
13 | 98/601/EC |
Road construction products (2/2), Bituminous mixtures (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 13108-1:2006 EN 13108-2:2006 EN 13108-3:2006 EN 13108-4:2006 EN 13108-5:2006 EN 13108-6:2006 EN 13108-7:2006 |
14 | 99/47 1/EC |
Space heating appliances (2/2), Space heating appliances without internal energy source (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 442-1:2014 EN 14037-1:2016 |
99/471/EC | Space heating appliances (2/2), Space heating appliances burning solid and liquid fuels (for uses subject to reaction to fire regulations) | system 3 / testing laboratory | EN 14037-1:2016 | |
15 | 2011/19/EC |
Sealants for non-structural use in joints in buildings and pedestrian walkways (2/2), Sealants for non-structural use in joints in buildings and pedestrian walkways (for uses subject to reaction to fire regulations) |
system 3 / testing laboratory |
EN 15651-1:2012 EN 15651-2:2012 EN 15651-3:2012 EN 15651-4:2012 |