HZLAB20241203返回 Back
中国广州
| ISO/IEC 17025 | ||||||||||||||||
| No | Test Object | Item/Parameter | Standard or Method | Note | ||||||||||||
| -2 | Item/Parameter | |||||||||||||||
|
electromagneticinterference
suppression and connection to the supply mains IEC 60384-14:20235.19 |
||||||||||||||||
|
Fixed capacitors
for use in
electronic equipment -Part Sectional specification - Fixed capacitors electromagneticinterference suppression and connection to the supply mains EN IEC 60384-14:20235.19 |
||||||||||||||||
| 15.Glasses | ||||||||||||||||
| 1 |
Sunglasses and sunglass filters |
Part parameters |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:2022 EN ISO 12312-1:2022 |
Except
for Strength 3 |
||||||||||||
| 1 | Construction |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20224.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20224.1 |
||||||||||||||||
| 2 |
Filter
material and surface quality |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20224.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20224.2 |
||||||||||||||||
| 3 |
Transmittance
and filter categories |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses forgeneral use ISO 12312-1:20225.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20225.2 |
||||||||||||||||
| 4 |
Uniformity of luminous transmittance |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.1 |
||||||||||||||||
| 5 |
Requirements for road use and driving |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.2 |
||||||||||||||
|
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.2 |
||||||||||||||||
| c6IN | Wide-angle scatterc |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.3 |
||||||||||||||
|
Eye and face protection—Sunglasses and related
eyewear Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.3 |
||||||||||||||||
| 7 | Polarizing filters |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.4.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.4.2 |
||||||||||||||||
| 8 |
Gradient-tinted filters |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.4.3 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.4.3 |
||||||||||||||||
| 9 |
SolarBlue-light absorption/transmitt ance |
Eye
and face proection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.5.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.5.1 |
||||||||||||||||
| 10 |
UV absorption/transmitt ance |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20225.3.5.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20225.3.5.2 |
||||||||||||||||
| 11 |
Spherical
and astigmatic power |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses forgeneral use ISO 12312-1:20226.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20226.1 |
||||||||||||||||
| 12 | Spatial deviation |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20226.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20226.2 |
||||||||||||||||
| 13 | Prism imbalance |
Eye
and face protection—Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20226.3 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20226.3 |
||||||||||||||||
| 14 |
Minimum robustness of filters |
Eye
and face protection—Sunglasses and related eyewear— Part 1:Sunglasses for general use ISO 12312-1:20227.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20227.1 |
||||||||||||||||
| 15 |
Framedeformation and retention of filters |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20227.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20227.2 |
||||||||||||||||
| 16 |
Impact
resistance of sunglasses,strength level 1 |
Eye
and face protection —Sunglasses and related eyewear - Part 1:Sunglasses for general use ISO 12312-1:20227.3 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20227.3 |
||||||||||||||||
| 17 |
Increased
endurance of sunglasses |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20227.4 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20227.4 |
||||||||||||||||
| 18 |
Resistance
to perspiration |
Eye
and face protection —Sunglasses and related eyewear - Part 1:Sunglasses for general use ISO 12312-1:20227.5 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses forgeneral use EN ISO 12312-1:20227.5 |
||||||||||||||||
| 19 |
Impact
resistance of sunglasses,strength level 2 or 3 |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20227.6 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20227.6 |
||||||||||||||||
| 20 |
Resistance
to solar radiation |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20228 |
||||||||||||||
|
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use EN ISO 12312-1:20228 |
||||||||||||||||
| c21N |
Resistance
to ignition |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:20229 |
||||||||||||||
|
Eye and face protection—Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:20229 |
||||||||||||||||
| 22 | Coverage area |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:202211.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:202211.1 |
||||||||||||||||
| 23 |
Temporal
protective requirements |
Eye
and face protection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:202211.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
- Part 1:Sunglasses for general use EN ISO 12312-1:202211.2 |
||||||||||||||||
| 24 |
Information
and labelling |
Eye
and face proection —Sunglasses and related eyewear — Part 1:Sunglasses for general use ISO 12312-1:202212 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 1:Sunglasses for general use EN ISO 12312-1:202212 |
||||||||||||||||
| 2 |
sunglasses (include filters) |
Part parameters |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013;EN ISO 12311:2013 |
Except
for photochro mic lens, impact resistance level 3 |
||||||||||||
| 1 |
Test
method for assessment of filter material and surface quality |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN ISO12311:20136 |
||||||||||||||
| 2 |
Test
methods for measuring |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; |
Except
for photochro |
|||||||||||||
|
spectrophotometric propertiess |
EN ISO12311:20137 | mic lens | ||||||||||||||
|
3 CH Il |
Test
method for Measuring optical properties |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN IsO 12311:20138 |
||||||||||||||
| 4 |
minimum robustness of filters |
Personal
protective equipment -Test methods for sunglasses and related eyewearISO 12311:2013; EN ISO 12311:20139.1 |
||||||||||||||
| 5 |
impact
resistance level 1 |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN ISO12311:20139.2,9.3 |
||||||||||||||
| Title 21,Code of Federal Regulations,801.41021CFR801.410 C | ||||||||||||||||
| 6 |
Impact
resistance level 2 |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN ISO12311:20139.4 |
||||||||||||||
| 7 |
Frame
deformation andretention of filters |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN ISO 12311:20139.6 |
||||||||||||||
| 8 |
Increasedendurance of sunglasses |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO12311:2013; EN ISO 12311:20139.7 |
||||||||||||||
| 9 |
Resistance to radiation |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN ISO 12311:20139.8 |
||||||||||||||
| 10 |
Resistance
to ignition |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; EN ISO 12311:20139.9 |
||||||||||||||
| 11 |
Resistance to perspiration |
Personal
protective equipment -Test methods for sunglasses and related eyewear ISO 12311:2013; |
||||||||||||||
| EN ISO 12311:20139.10 | ||||||||||||||||
| 3 |
sunglasses (include filters) |
Part parameters |
FOR cONF for Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-2018 |
Except
for photochro mic lens (4.11.2), Except for 4.10.4 clause near infrared transmittan ce |
||||||||||||
| 1 | impact resistance |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.2,5.1 |
||||||||||||||
| 2 | Flammability |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.3,5.3 |
||||||||||||||
| 3 | Frame finish |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.4 |
||||||||||||||
| 4 | Frame corrosion |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.5,5.4 |
||||||||||||||
| 5 |
Frame
deformation and retention of enses |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.7 |
||||||||||||||
|
Personal protective equipment -Test methods for sunglasses
and related eyewear ISO 12311:20139.6 |
||||||||||||||||
| 6 |
Cosmetic
quality of lenses |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSIZ80.3-20184.8 |
||||||||||||||
| 7 |
Refractive properties |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.9 |
||||||||||||||
|
Personal protective equipment -Test methods for sunglasses
and related eyewear ISO 12311:2013;8 |
||||||||||||||||
| 8 |
Transmittance properties |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.10,5.7 |
||||||||||||||
| C9IN |
Qualification
of lens types |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.11 |
Except
for photochro mic lens (4.11.2) |
|||||||||||||
| 10 |
Tint
imbalance between lenses |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.12,5.7 |
||||||||||||||
| 11 | Axis of polarization |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.13,5.7 |
||||||||||||||
| 12 |
Resistance
to radiation |
for
Ophthalmics-Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20184.14,5.9 |
||||||||||||||
| 13 | Country of origin |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20186 |
||||||||||||||
| 14 |
Identification
of the standard |
for
Ophthalmics -Nonprescription Sunglass and Fashion Eyewear Requirements ANSI Z80.3-20187 |
||||||||||||||
| 4 |
sunglasses (include filters) |
All parameters | Sunglasses QB2457-99 | |||||||||||||
| 1 |
Surface
quality and internal defects |
Sunglasses QB2457-995.1 | ||||||||||||||
| 2 | Refractive power | Sunglasses QB 2457-995.2 | ||||||||||||||
| 3 |
Spectacle
frame requirements |
Sunglasses QB 2457-995.3 | ||||||||||||||
| 4 |
Assembly
accuracy and shaping requirements. |
Sunglasses QB 2457-995.4 | ||||||||||||||
| 5 |
Transmittance properties |
Sunglasses QB 2457-995.5 | ||||||||||||||
| 6 | Impact resistance | Sunglasses QB 2457-99 Appendix A | ||||||||||||||
| 7 |
Marking
and packaging |
Sunglasses QB2457-998 | ||||||||||||||
| 5 |
Spectacles for driving |
All parameters | Spectacles for driving QB/T 2659-2004 | |||||||||||||
| 1 | Lens requirements | Spectacles for driving QB/T 2659-20045.1,6.1 | ||||||||||||||
| 2 |
Frame Requirements |
Spectacles for driving QB/T 2659-20045.2,6.2 | ||||||||||||||
| 3 | Assembled quality | Spectacles for driving QB/T 2659-20045.3,6.3 | ||||||||||||||
| 4 |
Transmittance properties |
Spectacles fordriving QB/T 2659-20045.4,6.4 | ||||||||||||||
| 5 | Impact resistance | Spectacles for driving QB/T 2659-20045.5,6.5 | ||||||||||||||
| 6 | Ignition | Spectacles for drivingQB/T 2659-20045.6,6.6 | ||||||||||||||
| 7 | Axis of polarization | Spectacles for driving QB/T 2659-20045.7,6.7 | ||||||||||||||
| 8 |
Marking
and packaging |
Spectacles for driving QB/T 2659-20048 | ||||||||||||||
| 6 |
Spectacle Frames |
All parameters |
Spectacle
frames-General requirements and test methods GB/T 14214-2019 |
|||||||||||||
| 1 | Appearance quality |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.3 |
||||||||||||||
| 2 |
Dimensional tolerance |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.4,8.2 |
||||||||||||||
| 3 |
Dimensional stability at elevated temperature |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.6,8.3 |
||||||||||||||
| 4 |
Resistance to perspiration |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.7.1,8.4 |
||||||||||||||
| 5 |
Coating performance |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.7.2,8.5 |
||||||||||||||
| 6 | Frame deformation |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.8.1,8.6 |
||||||||||||||
| 7 | Retentionof Lens |
Spectacle
frames-Generat requirements and test methods GB/T 14214-20194.8.2,8.6 |
||||||||||||||
| 8 | Endurance |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.8.3,8.7 |
||||||||||||||
| 9 |
Resistance
to ignition |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.9.8.8 |
||||||||||||||
| 10 |
Resistance
to Radiation |
Spectacle
frames-General requirements and test methods GB/T 14214-20194.9.8.9 |
||||||||||||||
| 11 |
Marking
and information |
Spectacle
frames-General requirements and test methods GB/T 14214-20199,10 |
||||||||||||||
| 7 |
Spectacle Frames |
All parameters |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:2016 EN ISO 12870:2018 |
|||||||||||||
| 1 | Construction |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.1,7.2 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.1,7.2 |
||||||||||||||||
| 2 |
Dimensional tolerance on nominal size |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.3,4.4 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.3,4.4 |
||||||||||||||||
| 3 |
Dimensional stability at evelated temperature |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.6,8.2 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.6,8.2 |
||||||||||||||||
| 4 |
Resistance
to perspiration |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.7,8.3 |
||||||||||||||
|
Ophthalmic
optics-Spectacle frames-Requirements and test methods EN ISO 12870:20184.7,8.3 |
||||||||||||||||
| C5IN | Frame deformationc |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.8.1,8.4 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO12870:20184.8.1,8.4 CA |
||||||||||||||||
| 6 |
Lens
retention characteristics |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.8.2,8.4 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.8.2,8.4 |
||||||||||||||||
| 7 | Endurance |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.8.3,8.5 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.8.3,8.5 |
||||||||||||||||
| 8 |
Resistance
to ignition |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.9,8.6 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.9,8.6 |
||||||||||||||||
| 9 |
Resistance
to radiation |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20164.10,8.7 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20184.10,8.7 |
||||||||||||||||
| 10 |
Labeling
and information |
Ophthalmic
optics-Spectacle frames-Requirements and test methods ISO12870:20169,10,11 |
||||||||||||||
|
Ophthalmic optics-Spectacle frames-Requirements and
test methods EN ISO 12870:20189,10,11 |
||||||||||||||||
| 8 |
Reading Glasses |
All parameters |
Ophthalmic
optics-Specification for ready-to-wear spectacles EN 14139:2010 |
|||||||||||||
| 1 |
General requirements |
Ophthalmic
optics-Specification for ready-to-wear spectacles EN 14139:20104.2 |
||||||||||||||
| 2 |
Optical
power range and tolerances |
Ophthalmic
optics-Specification for ready-to-wear spectacles EN 14139:20104.3&4.4 |
||||||||||||||
|
3 CH |
Reference
points and prismatic power tolerances |
Ophthalmic optics-Specification for ready-to-wear spectacles EN 14139:20104.5ERVICE FOR CONFOF A |
NT | |||||||||||||
| 4 |
Marking
on the spectacles, indicationson packaging, instruction for use |
Ophthalmic
optics-Specification for ready-to-wear spectacles EN 14139:20105 |
||||||||||||||
| 9 |
Reading Glasses |
All parameters |
Ophthalmic
optics-Specification for single-vision ready-to-wear near-vision spectacles ISO 16034:2002 |
|||||||||||||
| 1 |
General requirements |
Ophthalmic
optics-Specification for single-vision ready-to-wear near-vision spectacles ISO 16034:20024.2 |
||||||||||||||
| 2 |
Optical
power range and tolerances |
Ophthalmic
optics-Specification for single-vision ready-to-wear near-vision spectacles ISO 16034:20024.3&4.4 |
||||||||||||||
| 3 |
Reference
points and prismatic power tolerances |
Ophthalmic
optics-Specification for single-vision ready-to-wear near-vision spectacles ISO 16034:20024.5 |
||||||||||||||
| 4 |
Markingon
the spectacles, indications on packaging, instruction for use |
Ophthalmic
optics-Specification for single-vision ready-to-wear near-vision spectacles ISO 16034:20025 |
||||||||||||||
| 10 |
Reading Glasses |
All parameters |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSI Z80.31-2017 |
|||||||||||||
| 1 | impact resistance |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSI Z80.31-20174.2,5.1 |
||||||||||||||
| 2 | Flammability |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSI Z80.31-20174.3,5.3 |
||||||||||||||
| 3 | Frame finish |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSIZ80.31-20174.4 |
||||||||||||||
| 4 | Frame corrosion |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSI Z80.31-20174.5,5.4 |
||||||||||||||
| 5 |
Frame
deformation and retention of enses |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSIZ80.31-20174.7 |
||||||||||||||
|
Personal protective equipment -Test methods for sunglasses
and related eyewear ISO 12311:20139.6 |
||||||||||||||||
| 6 |
Cosmetic
quality of enses |
Ophthalmic optics-Specification forready-to-wear near-vision spectacles ANSI Z80.31-20174.8 |
||||||||||||||
| 7 |
Refractive properties |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSIZ80.31-20174.9 |
||||||||||||||
| 8 | Physical properties |
Ophthalmic
optics-Specification forready-to-wear near-vision spectacles ANSI Z80.31-20174.10 |
||||||||||||||
| 9 |
Transmittance properties |
Ophthalmic optics-Specification forready-to-wear near-vision spectacles ANSI Z80.31-20174.11 |
||||||||||||||
| 10 |
Resistance
to radiation |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSI Z80.31-20174.12,5.9 |
||||||||||||||
| 11 |
Labelling
and information |
Ophthalmic
optics-Specification for ready-to-wear near-vision spectacles ANSI Z80.31-20174.13,4.14,4.15 |
||||||||||||||
| 11 |
Assembled spectacles |
Part parameters |
Assembled
Spectacles-Part1:Single-vision and multifocal GB 13511.1-2011 |
Except
for Multifocal lens position(5.7 ) |
||||||||||||
| 1 |
optical
power, thickness,color, quality |
Assembled
Spectacles-Part1:Single-vision and multifocal GB 13511.1-20115.2,6.1 |
||||||||||||||
| 2 | Transmittance |
Assembled
Spectacles-Part1:Single-vision and multifocal GB 13511.1-20115.3,6.2 |
||||||||||||||
| 3 |
spectacle
frame requirements |
Assembled
Spectacles-Partl:Single-vision and multifocal GB 13511.1-20115.4 |
||||||||||||||
|
OpticabNAL requirements |
Assembled
Spectacles-Part1:Single-vision and multifocals GB 13511.1-20115.6.6.3.6.4.6.5 |
Except
for Multifocal lens position(5.7 ) |
||||||||||||||
| 5 | Assembled quality |
Assembled
Spectacles-Part1:Single-vision and multifocal GB 13511.1-20115.8 |
||||||||||||||
| 6 |
Labeling and packaging |
Assembled
Spectacles-Part1:Single-vision and multifocal GB 13511.1-20117 |
||||||||||||||
| 12 |
Assembled spectacles |
All parameters |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 2011 |
|||||||||||||
| 1 |
spectacle frame requirements |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.2 |
||||||||||||||
| 2 |
Optical requirements |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.4,5 |
||||||||||||||
| 3 |
Thickness requirements |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.5,5 |
||||||||||||||
| 4 |
Vertical position(or height)ofthe fitting point |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.6,5 |
||||||||||||||
| 5 |
Horizontal position of the fitting point |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.7,5 |
||||||||||||||
| 6 |
Alignment marking tilt |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.8,5 |
||||||||||||||
| 7 | lens quality |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20114.9 |
||||||||||||||
| 8 |
Labeling and packaging |
Assembled
Spectacles-Part 2:Progressive power GB 13511.2- 20116,7,8 |
||||||||||||||
| 13 |
Assembled spectacles |
All parameters |
Assembled
Spectacles-Part 2:Progressive power GB 13511.3- 2019 |
|||||||||||||
| 1 |
General requirements |
Assembled
Spectacles-Part 2:Progressive power GB 13511.3- 20194.1 |
||||||||||||||
| 2 |
Optical
power range and tolerancesc |
Assembled
Spectacles-Part 2:Progressive power GB 13511.3- 20194.2.5 R |
||||||||||||||
| 3 |
Imblance
of optical power |
Assembled
Spectacles-Part 2:Progressive power GB 13511.3- 20194.3,5 |
||||||||||||||
| 4 | Optical Center |
Assembled
Spectacles-Part 2:Progressive power GB 13511.3- 20194.4,5 |
||||||||||||||
| 5 | Marking |
Assembled
Spectacles-Part 2:Progressive power GB 13511.3- 20196 |
||||||||||||||
| 14 |
Swimming goggles |
All parameters | Specification for surface swimming goggles BS 5883:1996 | |||||||||||||
| 1 | General | Specification for surface swimming goggles BS 5883:19964.1 | ||||||||||||||
| 2 | Projections | Specification for surface swimming goggles BS 5883:19964.2 | ||||||||||||||
| 3 |
Material components |
Specification for surface swimming goggles BS 5883:19964.3 | ||||||||||||||
| 4 | General | Specification for surface swimming goggles BS 5883:19964.4.1 | ||||||||||||||
| 5 | Impact strength |
Specification
for surface swimming goggles BS 5883:19964.4.2, A.1 |
||||||||||||||
| 6 | Defects | Specification for surface swimming goggles BS 5883:19964.4.3 | ||||||||||||||
| 7 | Leakage |
Specification
for surface swimming goggles BS 5883:19964.4.4, A.2 |
||||||||||||||
| 8 |
Compressive strength of eye cup |
Specification
for surface swimming goggles BS 5883:19964.5, A.3 |
||||||||||||||
| 9 | water seal |
Specification
for surface swimming goggles BS 5883:19964.6, A.4 |
||||||||||||||
| 10 | Head strap |
Specification
for surface swimming goggles BS 5883:19964.7, A.5 |
||||||||||||||
| 11 | Bridge strap |
Specification
for surface swimming goggles BS 5883:19964.8, A.6 |
||||||||||||||
| 12 | Marking | Specification for surfaceswimming goggles BS 5883:19965 | ||||||||||||||
| 13 | Instructions | Specification for surface swimming goggles BS 5883:19966 | ||||||||||||||
| 15 |
Swimming goggles |
All parameters | Specification for surface swimming goggles QB/T 4734-2014 | |||||||||||||
| 1 | General | Specification fo surface swimming goggles QB/T 4734-20144.1 | ||||||||||||||
| 2 | Lens |
Specification
for surface swimming goggles QB/T 4734-2014 4.2.5.1 |
||||||||||||||
| 3 | Impact strength |
Specification
for surface swimming goggles QB/T 4734-2014 4.3,5.2 |
||||||||||||||
| 4 |
Compressive strength of eye cup |
Specification
for surface swimming goggles QB/T 4734-2014 4.4,5.3 |
||||||||||||||
| 5 | Leakage |
Specification
for surface swimming goggles QB/T 4734-2014 4.5,5.4 |
||||||||||||||
| 6 | Anti-fog |
Specification
for surface swimming goggles QB/T 4734-2014 4.6,5.5 |
||||||||||||||
| 7 | water seal |
Specification
for surface swimming goggles QB/T 4734-2014 4.7,5.6 |
||||||||||||||
| 8 | Head strap |
Specification
for surface swimming goggles QB/T 4734-2014 4.8,5.7 |
||||||||||||||
| 9 | Bridge strap |
Specification
for surface swimming goggles QB/T 4734-2014 4.9,5.8 |
||||||||||||||
| 10 | Appearance |
Specification
for surface swimming goggles QB/T 4734-2014 4.10,5.9 |
||||||||||||||
| 11 |
Marking
and packaging |
Specification
for surface swimming goggles QB/T 4734-2014 7.1,7.2 |
||||||||||||||
| 16 | Ski goggles |
S Part parameters |
E OF ACCREDITATION CERTIFICATE Personal eye-protection -Ski goggles for downhill skiing EN 174:2001 |
except
for 5.3 Protection against water and snow 5.6.1 clause Resistance to surface damage by fine particles:5 6.2 clause Resistance to fogging of oculars 5.6.3 clause Enhanced infrared absorption of oculars |
||||||||||||
| 1 |
General requirements |
Personal
eye-protection -Ski goggles for downhll skiing EN 174 ·20014.1 |
||||||||||||||
| 2 | Materials |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20014.2 |
||||||||||||||
| 3 | Sit and fit |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20014.3 |
||||||||||||||
| 4 | Ventilation |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20014.4 |
||||||||||||||
| 5 | Field of vision |
Personal
eye-protection =Ski goggles for downhill skiing EN 174:20015.1.1,6.2 |
||||||||||||||
| 6 | Lens requirements |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20015.1.2 |
||||||||||||||
|
Personal eye protection sunglassesand sunglare filters for
general use EN 1836:19974.2 |
||||||||||||||||
| 7 |
Mechanical strength |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20015.2,6.5 |
||||||||||||||
| 8 |
Resistance
to ignition |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20015.4 |
||||||||||||||
|
Personal eye protection sunglassesand sunglare filters for
general use EN 1836:19977 |
||||||||||||||||
| 9 |
Suitability
for cleaning and care |
Personal
eye-protection -Ski goggles for downhill skiing EN 174:20015.5 |
||||||||||||||
| 17 | eye -protector | Part parameters |
American National Standard Occupational and
Educational Personal Eye and Face Protection Devices ANSI/ISEA Z87.1- 2020 |
Except
for clause 6.2 anti-fog, 7.1.4.3 High velocity impact, 7.2.3 Automatic Darkening Welding Filter |
||||||||||||
| NATiO |
ITATON
SERVICE FOR CONFO OF A( REDITATION C |
Lenses,7.3 droplet liquids and splashes,7. 4 Dust Hazard,7.5 Fine Dust |
||||||||||||||
| 1 |
Optical requirements |
American
National Standard Occupational Personal Eye and Face Protection Devices 20205.1,9.1,9.2,9.3,9.4 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 2 |
Physical requirements |
American
National Standard Occupational Personal Eye and Face Protection Devices 20205.2.9.6,9.7.9.8 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 3 | Marking |
American
National Standard Occupational Personal Eye and Face Protection Devices 20205.3 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 4 | Other requirements |
American
National Standard Occupational Personal Eye and Face Protection Devices 20205.4 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 5 | Replaceable lenses |
American
National Standard Occupational Personal Eye and Face Protection Devices 20205.5 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 6 |
Relaxed Optics Level |
American
National Standard Occupational Personal Eye and Face Protection Devices 20206.1,9.2 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 7 |
Lateral(Side) Coverage |
American
National Standard Occupational Personal Eye and Face Protection Devices 20207.1.3,9.10 |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 8 | High mass impact |
American
National Standard Occupational Personal Eye and Face Protection Devices |
and Educational ANSI/ISEA Z87.1- |
|||||||||||||
| 20207.1.4.2.9.11 | ||||||||||||||||
|
9 CHIN |
Protectors with clear lens 1O |
American
National Standard Occupational and Educational Personal Eye and Face Protection Devices ANSI/ISEA Z87.1- 20207.2.1.9.2 CE FOR cONF A |
NT | |||||||||||||
| 10 |
Protectors
providing Filtration of Optical Radiation |
American
National Standard Occupational and Educational Personal Eye and Face Protection Devices ANSI/ISEA Z87.1- 20207.2.2,9.2 |
||||||||||||||
| 18 | eye -protector | Part parameters | The specifications for personal eye-protectors GB 14866-2006 |
Except
for 5.10clause lens abrasion;5. 11 high velocity, 5.12 molten metal,5,13 dust,5.14 Fine dust, 6.8 droplet liquids and splashes |
||||||||||||
| 1 | Materials |
The
specifications for personal eye-protectors GB 14866-2006 5.1 |
||||||||||||||
| 2 | Construction |
The
specifications for personal eye-protectors GB 14866-2006 5.2 |
||||||||||||||
| 3 | Headbands |
The
specifications for personal eye-protectors GB 14866-2006 5.3 |
||||||||||||||
| 4 | Lens size |
The
specifications for personal eye-protectors GB 14866-2006 5.4 |
||||||||||||||
| 5 | surface quality of | The specifications for personal eye-protectors GB 14866-2006 | ||||||||||||||
| lens | 5.5 | |||||||||||||||
| 6 | Optical property |
The
specifications for personal eye-protectors GB 14866-2006 5.6.6.1 |
||||||||||||||
| 7 | Impact resistance |
The
specifications for personal eye-protectors GB/14866-2006 5.7,6.2 |
||||||||||||||
| 8 | Resistance to heat |
The
specifications for personal eye-protectors GB 14866-2006 5.8,6.3 |
||||||||||||||
| 9 |
Resistance
to corrosion |
The
specifications for personal eye-protectors GB 14866-2006 5.9,6.4 |
||||||||||||||
| 19 |
Spectacle lenses |
All parameters |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-2005 |
|||||||||||||
| 1 | Focal power |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-20055.1.2.1,6.1 |
||||||||||||||
| 2 |
Tolerances
on the focal power of enses |
Uncut
finished Spectacle lenses-Part 1:Single-vision and multifocal lenses GB 10810.1-20055.1.2.2,6.2 |
||||||||||||||
| 3 |
Tolerances
on the addition power of multifocal lenses |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-20055.1.3,6.4 |
||||||||||||||
| 4 |
Tolerances
on optical centration and prismatic power |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-20055.1.4,6.3 |
||||||||||||||
| 5 |
Tolerances
on the base setting of prism |
Uncut
finished Spectacle lenses-Part 1:Single-vision and multifocal lenses GB 10810.1-20055.1.5,6.3 |
||||||||||||||
| 6 |
Material
and surface quality |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-20055.1.6,6.6 |
||||||||||||||
| 7 |
Geometrical dimension |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-20055.2,6.5 |
||||||||||||||
| 8 |
Marking
and reference |
Uncut
finished Spectacle lenses--Part 1:Single-vision and multifocal lenses GB 10810.1-20057,8 |
||||||||||||||
| 20 |
Spectacle lenses |
S Part parameters |
[ATON SERVICE FOR CONF OF ACCREDITATION CERTIF CATE Ophthalmic optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:2017 EN ISO 8980.1:2017 |
except
for 5.3.2 clause Requireme nts on segment dimensions for multifocal lenses;5.4 Orientation requiremen t for polarizing enses |
||||||||||||
| 1 | Back Vertex power |
Ophthalmic
optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20175.2.2,6.2 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses
Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20175.2.2,6.2 |
||||||||||||||||
| 2 |
Direction of
the cylinderaxis |
Ophthalmic
optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20175.2.3,6.3 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses
Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20175.2.3,6.3 |
||||||||||||||||
| 3 |
Addition
power of multifocal lenses |
Ophthalmic
optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO |
||||||||||||||
|
dimensions for multifocal lenses |
||||||||||||||||
| 7 |
Inspection
method for material and surface quality |
Ophthalmic
optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20176.7 |
||||||||||||||
|
Ophthalmic optics
Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20176.7 |
||||||||||||||||
| 8 |
Marking
and information |
Ophthalmic
optics Uncut finished spectacle
lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20177,8,9 |
||||||||||||||
|
Ophthalmic optics
Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20177,8,9 |
||||||||||||||||
| 21 |
Spectacle lenses |
All parameters |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-2006 |
|||||||||||||
| 1 | Focal power |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.2.2.1,5.1 |
||||||||||||||
| 2 |
Tolerances
on the focal power of lenses |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.2.2.2,5.2 |
||||||||||||||
| 3 |
Tolerances
on the addition power of multifocal lenses |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.2.3,5.4 |
||||||||||||||
| 4 |
Tolerances
on optical centration and prismatic power |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.2.4,5.3 |
||||||||||||||
| 5 |
Tolerances
on the base setting of prism |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.2.5,5.3 |
||||||||||||||
| 6 |
Geometrical dimension |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.3 |
||||||||||||||
| 7 |
Material
andsurface quality |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20064.4,5.5C |
||||||||||||||
| 8 |
Label and information |
Uncut
finished Spectacle lenses--Part 2:Progressive power spectacle lenses GB 10810.2-20066,7 |
||||||||||||||
| 22 |
Spectacle lenses |
Part parameters |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:2017 EN ISO8980-2:2017 |
except
for 5.4 clause Orientation requiremen t for polarizing lenses |
||||||||||||
| 1 | Back Vertex power |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20175.2.2, 6.2 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 5.2.2,6.2 |
||||||||||||||||
| 2 |
Direction of
the cylinder axis |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20175.2.3, 6.3 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 5.2.3,6.3 |
||||||||||||||||
| 3 |
Variation
power (including addition power) |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20175.2.4, 6.5 |
||||||||||||||
|
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses EN ISO 8980-2:2017 5.2.4,6.5 |
||||||||||||||||
| 4 | Prismatic powers |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20175.2.5, 6.4 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 5.2.5,6.4 |
||||||||||||||||
| 5 | Prism base setting |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20175.2.6, 6.4 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 5.2.6,6.4 |
||||||||||||||||
| 6 |
Geometrical requirements |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20175.3 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 5.3 |
||||||||||||||||
| 7 |
Inspection
method formaterial and surface quality |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20176.7, Annex A |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 6.7,Annex A |
||||||||||||||||
| 8 |
Marking
and information |
Ophthalmic
optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses ISO 8980-2:20177,8,9 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part
2: Specifications for power-variation lenses EN ISO 8980-2:2017 |
||||||||||||||||
| 7,8,9 | ||||||||||||||||
| 23 |
Spectacle enses |
Part parameters |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-2006 |
Except
for photochro mic lens (5.5.1) |
||||||||||||
| 1 |
General requirements |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-20065.1 |
||||||||||||||
| 2 |
transmittance requirements of spectacles |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-20065.2,6 |
||||||||||||||
| 3 |
transmittance requirements of sunglasses |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-20065.3,6 |
||||||||||||||
| 4 |
transmittance requirements of driving spectacles and trafficsignal |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-20065.4,6 |
||||||||||||||
| 5 |
Additional transmittance requirements of Special filters |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-20065.5,6 |
Except
for photochro mic lens (5.5.1) |
|||||||||||||
| 6 |
Label
and information |
Spectacle
lenses and related eye wear-Part 3:Transmittance specifications and test methods GB 10810.3-20068 |
||||||||||||||
| 24 |
Spectacle lenses |
Part parameters |
Ophthalmic
optics Uncut finished spectacle lenses
Part 3:Transmittance specifications and test methods ISO8980-3:2013 EN ISO8980-3:2013 |
Except
for photochro mic lens (6.4) |
||||||||||||
| 8 | General |
Ophthalmic
optics Uncut finished spectacle lenses
Part 3:Transmittance specifications and testmethods ISO 8980-3:2013 |
||||||||||||||
| 6.1,7 | ||||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods EN ISO 8980- 3:20136.1,7 |
NT | |||||||||||||||
| 2 |
General transmittance requirements |
Ophthalmic
optics Uncut finished spectacle lenses
Part 3:Transmittance specifications and test methods ISO 8980-3:2013 6.2,7 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods EN ISO 8980- 3:20136.2,7 |
||||||||||||||||
| 3 |
Spectral transmittance requirements of spectacle lenses intended for road use and driving |
Ophthalmic
optics Uncut finished spectacle lenses
Part 3:Transmittance specifications and test methods ISO 8980-3:2013 6.3,7 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods EN ISO 8980- 3:20136.3,7 |
||||||||||||||||
| 4 |
Additional transmittance requirements for special types of spectacle lenses |
Ophthalmic
optics Uncut finished spectacle lenses
Part 3:Transmittance specifications and test methods ISO 8980-3:2013 6.4,7 |
Except
for photochro mic lens (6.4) |
|||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods EN ISO 8980- 3:20136.4,7 |
Except
for photochro mic lens (6.4) |
|||||||||||||||
| 5 |
Resistance
to radiation |
Ophthalmic
optics Uncut finished spectacle lenses
Part 3:Transmittance specifications and testmethods ISO 8980-3:2013 6.5,7 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle
lenses 3:Transmittance specifications and test methods EN ISO 8980- |
Part | |||||||||||||||
| 3:20136.5,7 | ||||||||||||||||
| 6 | Identification |
Ophthalmic
optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods ISO 8980-3:2013 8 SM |
NT | |||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part 3:Transmittance specifications and test methods EN ISO 8980- 3:20138 |
||||||||||||||||
| 25 |
Spectacle lenses |
All parameters |
Ophthalmic
optics -Spectacle lenses -Fundamental requirements for uncut finished lenses ISO 14889:2013+A1:2017;EN ISO 14889:2013+A1:2017 |
|||||||||||||
| 1 | Inflammability |
Ophthalmic
optics -Spectacle lenses -Fundamental requirements for uncut finished lenses ISO14889:2013+A1:20174.3.2,5.2 |
||||||||||||||
|
Ophthalmic optics-Spectacle lenses -Fundamental
requirements for uncut finished lenses EN ISO 14889:2013+A1:20174.3.2,5.2 |
||||||||||||||||
| 2 | Mechanical Strength |
Ophthalmic
optics -Spectacle lenses -Fundamental requirements for uncut finished lenses ISO 14889:2013+A1:20174.4,5.3 |
||||||||||||||
|
Ophthalmic optics -Spectacle lenses -Fundamental
requirements for uncut finished lenses EN ISO 14889:2013+A1:20174.4,5.3 |
||||||||||||||||
| 3 | Transmittance |
Ophthalmic
optics-Spectacle lenses -Fundamental requirements for uncut finished lenses ISO 14889:2013+A1:20174.5 |
||||||||||||||
|
Ophthalmic optics-Spectacle lenses -Fundamental
requirements for uncut finished lenses EN ISO 14889:2013+A1:20174.5 |
||||||||||||||||
| 4 | Identification |
Ophthalmic
optics -Spectacle lenses-Fundamental requirements for uncut finished lenses ISO 14889:2013+A1:20176,7 |
||||||||||||||
|
Ophthalmic optics-Spectacle lenses -Fundamental
requirements for uncut finished lenses EN ISO 14889:2013+A1:20176,7 |
||||||||||||||||
| 26 |
Spectacle lenses |
Part parameters |
Ophthalmic
optics -Mounted spectacle lenses ISO 21987:2017 EN ISO21987:2017 |
except
for 5.5.1 clause Multifocal |
||||||||||||
| C | NATONAL 中 |
EDITATON SERVICE
FOR CONFORMITY E OF ACCREDITATION CERTIFICATE |
A |
lenses
and 5.6 clause Orientation requiremen t for polarizing lenses |
||||||||||||
| 1 |
Lenses
used in manufacturing complete spectacles |
Ophthalmic
optics -Mounted spectacle lenses EN ISO21987:20175.2 |
ISO 21987:2017 | |||||||||||||
| 2 | Back Vertex power |
Ophthalmic
optics -Mounted spectacle lenses EN ISO21987:20175.3.2,6.2 |
ISO 21987:2017 | |||||||||||||
| 3 |
Direction
of the cylinder axis |
Ophthalmic
optics -Mounted spectacle lenses EN ISO21987:20175.3.3,6.3 |
ISO 21987:2017 | |||||||||||||
| 4 |
Addition
power or variation power |
Ophthalmic
optics -Mounted spectacle lenses EN ISO21987:20175.3.4,6.4 |
ISO 21987:2017 | |||||||||||||
| 5 |
Prism
imbalance (relative prism error)for mounted single-vision lenses (excluding position- specific single- vision lenses)and multifocal lenses |
Ophthalmic
optics -Mounted spectacle lenses EN ISO21987:20175.3.5,6.5 |
ISO 21987:2017 | |||||||||||||
| 6 |
Prism
imbalance (relative prism error)for position- specific single- vision lenses and power-variation |
Ophthalmic
optics -Mounted spectacle lenses EN ISO21987:20175.3.6,6.6 |
ISO 21987:2017 | |||||||||||||
| lenses | ||||||||||||||||
| 7 |
Requirements
for thickness |
Ophthalmic
optics -Mounted spectacle lenses ISO 21987:2017 EN ISO 21987:20175.4 |
||||||||||||||
| 8 |
Requirements
for positioning S( |
Ophthalmic
optics -Mounted spectacle lenses ISO 21987:2017 EN ISO21987:2017.5.5ATION CERTIFICA |
Except
fof multifocal lenses |
|||||||||||||
| 27 |
Spectacle lenses |
Part parameters |
Uncut
finished spectacle lenses Optical hard resin lenses QB/T 2506-2017 |
Except for 5.2 clause Anti- reflective coating and clause 5.3 abrasion and clause 5.4.2.2 Photochro mic spectacle lenses and 5.5 refractive index and 5.6 abbe number |
||||||||||||
| 1 | Basic properties |
Uncut
finished spectacle lenses Optical hard resin lenses QB/T 2506-20175.1,6.2 |
||||||||||||||
| 2 |
Transmittance properties |
Uncut
finished spectacle lenses Optical hard resin lenses QB/T 2506-20175.4,6.5 |
except clause 5.4.2.2 Photochro |
|||||||||||||
|
mic spectacle |
||||||||||||||||
| 3 |
Resistance
to radiation |
Uncut
finished spectacle lenses Optical hard resin lenses QB/T 2506-20175.7,6.7 |
||||||||||||||
| 4 |
Resistance
to ignition |
Uncut
finished spectaclelenses Optical hard resin lenses QB/T 2506-20175.8,6.8 |
||||||||||||||
| 5 | Impact resistance |
Uncut
finished spectacle lenses Optical hard resin lenses QB/T 2506-20175.9.6.9 |
||||||||||||||
| 6 |
Identification
and package |
Uncut
finished spectacle lenses Optical hard resin lenses QB/T 2506-20178 |
||||||||||||||
| 28 |
Eye and face protection |
1 |
Test method
for refractive power and prismatic power for plano lenses |
Eye
and face protection -Test methods-Part 1:Geometrical optical properties ISO 18526-1:20206.1 |
||||||||||||
|
Eye and face protection -Test methods-Part
1:Geometrical optical properties EN ISO 18526-1:20206.1 |
||||||||||||||||
|
Eye and face protection -Test methods-Part
1:Geometrical optical properties BS EN ISO 18526-1:20206.1 |
||||||||||||||||
| 2 |
Test method
for the prism imbalance of complete eye protectors orlenses covering both eyes |
Eye
and face protection -Test methods-Part 1:Geometrical optical properties ISO 18526-1:20206.2 |
||||||||||||||
|
Eye and face protection -Test methods-Part
1:Geometrical optical properties EN ISO 18526-1:20206.2 |
||||||||||||||||
|
Eye and face protection -Test methods-Part
1:Geometrical optical properties BS EN ISO 18526-1:20206.2 |
||||||||||||||||
| 3 | Spatial deviations |
Eye
and face protection -Test methods-Part 1:Geometrical optical properties ISO 18526-1:20206.3 |
||||||||||||||
|
Eye and face protection -Test methods-Part
1:Geometrical optical properties EN ISO 18526-1:20206.3 |
||||||||||||||||
|
Eye and face protection -Test methods-Part
1:Geometrical optical properties BS EN ISO 18526-1:20206.3 |
||||||||||||||||
| 29 |
Eyeand
face protection |
1 |
Luminous transmittance |
Eye
and face protection -Test methods-Part 2:Physical optical properties ISO 18526-2:20207 |
||||||||||||
|
Eye
and face protection-Test methods-Part 2:Physical optical properties EN ISO 18526-2:20207 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties BS EN ISO 18526-2:20207 |
||||||||||||||||
| 2 |
Ultraviolet transmittance |
Eye
and face protection -Test methods-Part 2:Physical optical properties ISO 18526-2:20208 |
||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical propertiesEN ISO18526-2:20208 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties BS EN ISO 18526-2:20208 |
||||||||||||||||
| 3 |
Blue-light transmittance |
Eye
and face protection-Test methods-Part 2:Physical optical properties ISO 18526-2:20209 |
||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical propertiesEN ISO 18526-2:20209 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties BS EN ISO 18526-2:20209 |
||||||||||||||||
| 4 |
Relative
visual attenuation coefficient for traffic signal light detection,Qsignal |
Eye
and face protection-Test methods-Part 2:Physical optical properties ISO 18526-2:202011 |
||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties EN ISO 18526-2:202011 |
||||||||||||||||
|
Eye and face protection-Test methods-Part 2:Physical
optical propertiesBS EN ISO 18526-2:202011 |
||||||||||||||||
| 5 | Wide angle scatter |
Eye
and face protection -Test methods-Part 2:Physical optical properties ISO 18526-2:202014.1 |
||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties EN ISO 18526-2:202014.1 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties BS EN ISO 18526-2:202014.1 |
||||||||||||||||
| 6 | Polarization |
Eye
and face protection -Test methods-Part 2:Physical optical properties ISO 18526-2:202015 |
||||||||||||||
|
Eye
and face protection-Test methods-Part 2:Physical optical properties EN ISO 18526-2:202015 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 2:Physical
optical properties BS EN ISO 18526-2:202015 |
||||||||||||||||
| 30 |
Eye and face protection |
1 | Physical inspection |
Eye
and face protection -Test methods-Part 3:Physicaf and mechanicalproperties ISO18526-3:20206.1 |
||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20206.1 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.1 |
||||||||||||||||
| 2 | Area to be protected |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20206.3&6.4 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO18526-3:20206.3&6.4 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.3&6.4 |
||||||||||||||||
| 3 |
Retention
by headbands and harnesses (sit and fit) |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20206.5 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20206.5 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.5 |
||||||||||||||||
| 4 |
Visual
assessment of material and surface quality of enses |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20206.6 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20206.6 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.6 |
||||||||||||||||
| 5 |
Resistance to thermal exposure |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20206.7 |
||||||||||||||
|
Eye
and face protection-Test methods-Part 3:Physical and mechanicalproperties EN ISO 18526-3:20206.7 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.7 |
||||||||||||||||
| 6 |
Resistance
to ultraviolet radiation |
Eye
and face protection -Test methods-Part 3:Physicaf and mechanicalproperties ISO18526-3:20206.8 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20206.8 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.8 |
||||||||||||||||
| 7 |
Resistance
to corrosion |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20206.9 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20206.9 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.9 |
||||||||||||||||
| 8 |
Resistance
to ignition |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20206.10 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20206.10 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20206.10 |
||||||||||||||||
| 9 |
Minimum robustness of unmounted lenses |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20207.2.1 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20207.2.1 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20207.2.1 |
||||||||||||||||
| 10 |
Drop
ball test for unmounted lenses |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20207.2.2 |
||||||||||||||
|
Eye
and face protection-Test methods-Part 3:Physical and mechanicalproperties EN ISO 18526-3:20207.2.2 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20207.2.2 |
||||||||||||||||
| 11 |
Drop ball
test for complete protectors |
Eye
and face protection -Test methods-Part 3:Physicaf and mechanicalproperties ISO 18526-3:20207.3.1 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20207.3.1 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20207.3.1 |
||||||||||||||||
| 12 |
High mass
test for complete protectors |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20207.3.3 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO18526-3:20207.3.3 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20207.3.3 |
||||||||||||||||
| 13 |
Penetration
ofvents and gaps |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20207.5 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20207.5 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20207.5 |
||||||||||||||||
| 14 |
Marking
and packaging |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20208 |
||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties EN ISO 18526-3:20208 |
||||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20208 |
||||||||||||||||
| 15 |
Information
to be supplied by the |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties ISO 18526-3:20209 |
||||||||||||||
| manufacturer |
Eye
and face protection -Test methods-Part 3:Physical and mechanicalproperties EN ISO 18526-3:20209 |
|||||||||||||||
|
Eye and face protection -Test methods-Part 3:Physical
and mechanicalproperties BS EN ISO 18526-3:20209 |
||||||||||||||||
| 31 |
Sports Sunglasses |
S Part parameters |
E OF ACCREDITATION CERTIFICATE Eye and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:2022;BS ISO 12312-3:2022 |
Except for 5.3.4.1 Photochro mic filters,5.3.4 .4Electro- optical sunglare filter, electro- optical sunglass filter,5.3.5 3Antireflec tive coated sunglasses, 5.3.5.4 Reduced reflection coated sunglasses, 5.3.5.5 Enhanced infrared absorption |
||||||||||||
| 1 |
Construction and materials |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active |
||||||||||||||
| CHIN | NATIONAL AC( | lifestyles ISO 12312-3:20224 | ||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20224CONFO RM{TYASSESSM |
NT | |||||||||||||||
| 2 |
SCF Transmitance |
OF DITATION CERTIFICATE Eye and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20225 |
Except for 5.3.4.1 Photochro mic filters,5.3.4 .4Electro- optical sunglare filter, electro- optical sunglass filter,5.3.5 3Antireflec tive coated sunglasses, 5.3.5.4 Reduced reflection coated sunglasses 5.3.5.5 Enhanced infrared absorption |
|||||||||||||
|
CHIN |
A NATIONAL ACC SCHED |
REDITATON SERVICE FOR CONFORMITY ASSES ULE OF ACCREDITATION CERTIFICATE Eye and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20225 |
Except for 5.3.4.1 Photochro mic filters,5.3.4 4Electro- optical sunglare filter, electro- optical sunglass filter,5.3.5 3Antireflec tive coated sunglasses, 5.3.5.4 Reduced reflection coated sunglasses, 5.3.5.5 Enhanced infrared absorption |
|||||||||||||
| 3 | Refractive power |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20226 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20226 |
||||||||||||||||
|
4 C |
Frame
deformation and retention of filtersjON |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20227.1 |
||||||||||||||
|
Eye and face protection—Sunglasses and related
eyewear— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20227.1 |
||||||||||||||||
| 5 |
Increased
endurance of sunglasses |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20227.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO12312-3:20227.2 |
||||||||||||||||
| 6 |
Resistance
to perspiration |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20227.3 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20227.3 |
||||||||||||||||
| 7 |
Increased
robustness of the sunglass, strength level 2 |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20227.4 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20227.4 |
||||||||||||||||
| 8 |
Resistance
to solar radiation |
Eye
and face proection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20228 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20228 |
||||||||||||||||
| 9 |
Resistance
to gnition |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:20229 |
||||||||||||||
|
Eye and face protection—Sunglasses and related
eyewear— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:20229 |
||||||||||||||||
| 10 |
Field of
view and coverage area |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:202212.1 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BSISO12312-3:202212.1 |
||||||||||||||||
| 11 |
Temporalprotective requirements |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:202212.2 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BSISO12312-3:202212.2 |
||||||||||||||||
| 12 |
Information
and labelling |
Eye
and face protection —Sunglasses and related eyewear — Part 3:Sunglasses for running,cycling and similar active lifestyles ISO 12312-3:202213 |
||||||||||||||
|
Eye and face protection —Sunglasses and related eyewear
— Part 3:Sunglasses for running,cycling and similar active lifestyles BS ISO 12312-3:202213 |
||||||||||||||||
| 32 |
Sunglasses
and sunglare filters |
1 |
Construction
and materials |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20205 |
||||||||||||
| 2 |
Sunglasses
and sunglare filters |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.1 |
||||||||||||||
| 3 |
Test
method of luminous |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.3 |
||||||||||||||
| radiation | 39552.2-20208.3 | |||||||||||||||
| 15 |
Resistance
to ignition |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.4 |
||||||||||||||
| 16 |
Resistance
to perspiration |
Sunglasses
and sunglare flters—Part 2:Test Method GB/T 39552.2-20208.5.1 |
||||||||||||||
| 17 |
Coating performance |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.5.2 |
||||||||||||||
| 18 | Coverage area |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.6.1 |
||||||||||||||
| 19 |
Impact
resistance of sunglare filters,(strength evel 1) |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.6.2 |
||||||||||||||
| 20 |
Impact
resistance of sunglasses,(strength level 1) |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.6.3 |
||||||||||||||
| 21 |
Impact
resistance of sunglasses, (strength level 2) |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.6.4 |
||||||||||||||
| 33 |
Sunglasses
and sunglare filters |
1 | Construction |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-20204.1 |
||||||||||||
| 2 |
Filter
material and surface quality |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20204.2 |
||||||||||||||
| 3 |
Transmittance
and filter categories |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-20205.1 |
||||||||||||||
| 4 |
Uniformity
of luminous transmittance |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-20205.2 |
||||||||||||||
| 5 |
Requirements
for road use and driving |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20205.3 |
||||||||||||||
| 6 | Scattered light |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20205.4 |
||||||||||||||
| 7 |
Polarizing
filters and polarizing sunglasses |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20205.5.2 ON C |
||||||||||||||
| 8 |
Solar
Blue-light absorption/transmitt ance |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20205.6.1 |
||||||||||||||
| 9 |
UV absorption/transmitt ance |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-20205.6.2 |
||||||||||||||
| 10 |
Spherical
and astigmatic and prism power |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20206.1 |
||||||||||||||
| 11 | Prism imbalance |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20206.2 |
||||||||||||||
| 12 |
Increased
endurance of sunglasses |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20207 |
||||||||||||||
| 13 |
Frame
deformation and retention of filters |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-20208 |
||||||||||||||
| 14 |
Resistance
to solar radiation |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-20209 |
||||||||||||||
| 15 |
Resistance
to ignition |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-202010 |
||||||||||||||
| 16 |
Resistance to perspiration |
Sunglasses
and sunglare filters—Part 1:General requirements GB39552.1-202011.1 |
||||||||||||||
| 17 |
Coating performance |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-202011.2 |
||||||||||||||
| 18 | Coverage area |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-202012 |
||||||||||||||
| 19 |
Strength
level 1 of Impact resistance |
Sunglasses
andsunglare filters—Part 1:General requirements GB39552.1-2020-13.1ATON |
||||||||||||||
| 20 |
Strength
level2 of Impact resistance |
Sunglasses
and sunglare filters—Part 1:General requirements GB 39552.1-202013.2 |
||||||||||||||
| 34 | Ski Goggles | 1 |
Construction
and adjustment |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20214.2 |
||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,4.2 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20224.2 |
||||||||||||||||
| 2 |
Cleaning
and/or disinfection |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20214.3 |
||||||||||||||
|
Eye and face protectionfor sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,4.3 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20224.3 |
||||||||||||||||
| 3 |
Lens
material and surface quality |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20214.4 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,4.4 |
||||||||||||||||
|
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20224.4 |
||||||||||||||||
| 4 |
Retention
by headband and harnesses |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20214.6 |
NT | |||||||||||||
|
Eye and face protection for sports use—Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,4.6 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20224.6 |
||||||||||||||||
| 5 |
Transmittance categories |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO18527-1:20215.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,5.2 |
||||||||||||||||
|
Eyeand face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20225.2 |
||||||||||||||||
| 6 |
Solar
ultraviolet transmittance |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20215.3 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- :2022.5.3 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20225.3 |
||||||||||||||||
| 7 |
Uniformity
of luminous transmittance and |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:2021 5.4.1 |
||||||||||||||
|
transmittance matching |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,5.4.1 |
|||||||||||||||
|
Eye and faceprotection for sports use —Part 1:Requirements
for downhill skiingand snowboarding goggles BS EN ISO 18527- 1;20225.4.1cRI |
||||||||||||||||
| 8 |
Ultraviolet transmittance of the frame or housing |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:2021 5.4.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,5.4.2 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20225.4.2 |
||||||||||||||||
| 9 | Polarizing lenses |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:2021 5.5.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,5.5.2 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20225.5.2 |
||||||||||||||||
| 10 |
Gradient-tinted enses |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:2021 5.5.3 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,5.5.3 |
||||||||||||||||
|
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20225.5.3 |
||||||||||||||||
| 11 |
Solar
blue-light absorption/transmitt ance |
Eye
and face protection for sports use —Part 1:Requirementsfor downhill skiing and snowboarding goggles ISO 18527-1:2021 5.6.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022.5.6.2 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhillskiing and snowboarding goggles BS EN ISO 18527- 1:20225.6.2 |
||||||||||||||||
| 12 |
Solar
UV absorption/transmitt ance |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:2021 5.6.3 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,5.6.3 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20225.6.3 |
||||||||||||||||
| 13 | Scattered light |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20216 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,6 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20226 |
||||||||||||||||
| c14N | Refractive powercC |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20217 |
||||||||||||||
|
Eyeand face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,7 S S |
NT | |||||||||||||||
|
Eye and face protection for sportsuse—Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20227 |
||||||||||||||||
| 15 | Mechanical testing |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20218 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,8 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20228 |
||||||||||||||||
| 16 |
Resistance
to solar ultraviolet radiation |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:20219 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,9 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:20229 |
||||||||||||||||
| 17 |
Resistance
to ignition |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:202110 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,10 |
||||||||||||||||
|
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:202210 |
||||||||||||||||
| 18 |
Minimum area to be protected |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:202113 |
NT | |||||||||||||
|
Eye and face protection for sports use—Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,13 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:202213 |
||||||||||||||||
| 19 |
Extended
low temperature range |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:2021 14.1 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,14.1 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:202214.1 |
||||||||||||||||
| 20 |
Marking
and information to be supplied by the manufacturer |
Eye
and face protection for sports use —Part 1:Requirements for downhill skiing and snowboarding goggles ISO 18527-1:202115 |
||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles EN ISO 18527- 1:2022,15 |
||||||||||||||||
|
Eye and face protection for sports use —Part 1:Requirements
for downhill skiing and snowboarding goggles BS EN ISO 18527- 1:202215 |
||||||||||||||||
| 35 |
Swimming Goggles |
1 |
Construction and adjustment |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface |
||||||||||||
| swimming ISO 18527-3:20204.2 | ||||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20214.2 |
NT | |||||||||||||||
| 2 |
Cleaning
and/or disinfection |
Eye
and face protection for sports use ——Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20204.3 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20214.3 |
||||||||||||||||
| 3 |
Lens
material and surface quality |
Eye
and face protection for sports use—Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20204.4 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20214.4 |
||||||||||||||||
| 4 |
Resistance
to corrosion |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20204.6 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20214.6 |
||||||||||||||||
| 5 |
Retention
by headband |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20204.7 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20214.7 |
||||||||||||||||
| 6 | Transmittance and | Eye and face protection for sports use —Part 3:Requirements and | ||||||||||||||
| C | filter categories |
test
methods for eyewear intended to be used for surface swimming ISO 18527-3:20205.2 |
||||||||||||||
|
Eyeand face protection for sports use—Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20215.2 |
NT | |||||||||||||||
| 7 |
Uniformity
of uminous transmittance and transmittance matching |
Eye
and face protection for sports use Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20205.3.1 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20215.3.1 |
||||||||||||||||
| 8 |
Variations
due to thickness variations |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20205.3.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO18527-3:20215.3.2 |
||||||||||||||||
| 9 | Polarizing lenses |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20205.4.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO18527-3:20215.4.2 |
||||||||||||||||
| 10 |
Solarblue-light absorption/transmitt ance |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO18527-3:20205.5.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO18527-3:20215.5.2 |
||||||||||||||||
| 11 |
Solar
UV absorption/transmitt anceTIO |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20205.4.3 |
||||||||||||||
|
Eye and face protection for sports use ——Part
3:Requirements and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:2021-5.4.3 |
||||||||||||||||
| 12 | Scattered light |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20206 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO18527-3:20216 |
||||||||||||||||
| 13 |
Refractive
power and prismatic power |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO18527-3:20207 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20217 |
||||||||||||||||
| 14 | Mechanical strength |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20208 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO18527-3:20218 |
||||||||||||||||
| 15 |
Minimum
optical aperture |
Eye
and face protection for sports use—Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20209.1 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20219.1 |
||||||||||||||||
| 16 |
Temporal
flange enses |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:20209.3 |
||||||||||||||
|
Eye and face protection for sports use ——Part
3:Requirements and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:20219.3 |
||||||||||||||||
| 17 |
Compressive strength of eyewear |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:202010.2,11.2 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO18527-3:202110.2,11.2 |
||||||||||||||||
| 18 |
Adhesion of
water sealto eyecup |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO18527-3:202010.3,11.3 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:202110.3,11.3 |
||||||||||||||||
| 19 | Headband |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:202010.4,11.4,11.5 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:202110.4,11.4,11.5 |
||||||||||||||||
| 20 | Nosebridge strap |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:202010.5,11.6 |
||||||||||||||
|
Eye and face protection for sports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:202110.5,11.6 |
||||||||||||||||
| 21 |
Marking
and information to be supplied by the manufacturer |
Eye
and face protection for sports use —Part 3:Requirements and test methods for eyewear intended to be used for surface swimming ISO 18527-3:202012 |
||||||||||||||
|
Eye and face protection forsports use —Part 3:Requirements
and test methods for eyewear intended to be used for surface swimming BS ISO 18527-3:2021-12 |
||||||||||||||||
| 36 |
Occupational eye and face protector |
1 |
Construction
and adjustment |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20214.3 |
||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20224.3 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20224.3 |
||||||||||||||||
| 2 |
Cleaning
and/or disinfection |
Eye
and face protection for occupational use —Part 1:General requirementsISO 16321-1:20214.4 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20224.4 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20224.4 |
||||||||||||||||
| 3 |
Refractive
power and prismatic power forplano lenses |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20215.2 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20225.2 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20225.2 |
||||||||||||||||
| 4 |
Mounted prescription lenses |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20215.3 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20225.3 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20225.3 |
||||||||||||||||
| 5 |
Sunglare
filters for occupational use |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20216.3.3 |
Except
for 6.3.3.4.1 Photochro mic filters |
|||||||||||||
|
Eye and face protection for occupational use—Part
1:General requirements EN ISO 16321-1:20226.3.3 |
Except
for 6.3.3.4.1 Photochro mic filters |
|||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20226.3.3 |
Except
for 6.3.3.4.1 Photochro mic filters |
|||||||||||||||
| 6 |
Uniformity
of luminous transmittance and transmittance matching |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20216.4 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20226.4 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20226.4 |
||||||||||||||||
| 7 | Scattered light |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20216.5 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20226.5 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20226.5 |
||||||||||||||||
| 8 | Frame transmittance |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20216.6 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20226.6 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20226.6 |
||||||||||||||||
|
unmounted
lenses, visors and filters |
requirements EN ISO16321-1:20227.3 | |||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.3 |
||||||||||||||||
| 12 |
Basic impact
level of complete protectors |
Eye
and face protection for occupational use —Part-1:General requirements ISO16321-1:20217.4 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20227.4 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.4 |
||||||||||||||||
| 13 |
Resistance
to thermal exposure |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.5 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO16321-1:20227.5 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.5 |
||||||||||||||||
| 14 |
Resistance
to UV radiation |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.6 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirementsEN ISO 16321-1:20227.6 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.6 |
||||||||||||||||
| 15 |
Resistance
to corrosion |
Eye
and face protection for occupational use —Part 1:General requirementsISO 16321-1:20217.7 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20227.7 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.7 |
||||||||||||||||
| 16 |
Resistance
to ignition |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.8 |
||||||||||||||
|
Eye
and face protection for occupational use —Part 1:General requirements EN ISO16321-1:20227.8 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.8 |
||||||||||||||||
| 17 |
Penetration
of vents and gap |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.9 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirementsEN ISO16321-1:20227.9 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.9 |
||||||||||||||||
| 18 |
High mass
impact, impact level HM |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.11 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirementsEN ISO 16321-1:20227.11 |
||||||||||||||||
|
Eye and face proection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.11 |
||||||||||||||||
| 19 |
Marking
of protectors |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20218 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20228 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirementsBS EN ISO 16321-1:20228 |
||||||||||||||||
| 20 |
Information
to be supplied by the manufacturer |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20219 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20229 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20229 |
||||||||||||||||
| 37 |
Blue-light Protection |
1 |
Transmittace
of blue-light |
Technical
requirements on application of light health and light safety of coating for protection against blue light GB/T 38120- |
||||||||||||
| coating | 20195.2.1.1 | |||||||||||||||
| No | Test Object | Item/Parameter | Standard or Method | Note | ||||||||||||
| No | Item/Parameter | |||||||||||||||
| 1 |
medical electrical equipment and medical electrical systems used in the home healthcare environment |
1 |
Additional requirements for mechanical strength |
Medical
electrical equipmentPart 1-11:General requirements for basic safety and essential performance —Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment IEC 60601-1-11:2010;EN 60601-1-11:2010;IEC 60601-1-11:2015; EN 60601-1-11:201510.1 |
||||||||||||
| 2 |
automated non- invasive sphygmomano meters |
1 | Rough handling test |
medical
electrical equipment-part 2-30:particular requirements for th basic safety and essential performance of automated non- invasive sphygmomanometers IEC 80601-2-30:2009;IEC80601- 2-30:2009 +A1:2013;EN80601-2-30:2010;EN 80601-2- 30:2010/A1:2015,IEC 80601-2-30:2018;EN IEC 80601-2- |
||||||||||||
| No | Test Object | Item/Parameter | Standard orMethod | Note | ||||||||||||
| No | Item/Parameter | |||||||||||||||
| 63056:20207.8 | ||||||||||||||||
| 6 | Drop test |
Secondary
cells and batteries containing alkaline or other non- acidelectrolytes -Safety requirements for secondary lithium cells and batteriesfor use in electrical energy storage systems IEC 63056:20207.9 |
||||||||||||||
| Light industrial products | ||||||||||||||||
| Glasses | ||||||||||||||||
| 1 | Glasses | 1 | Nickel release |
Ophthalmic optics —Referencemethod for
the testing of spectacle frames and sunglasses for nickel release EN 16128:2015; BS EN 16128:2015; DIN EN 16128:2016 |
||||||||||||
| Food contact material and products | ||||||||||||||||
| 1 |
Food
contact material |
1 |
Migration of
Lead and Cadmium |
Materials
and articles in contact with foodstuffs-silicate surfaces- Part 1:Determination of the release of lead and cadmium form ceramic ware EN 1388-1:1995 |
||||||||||||
|
Materials and articles in contact with foodstuffs-silicate
surfaces- Part 2:Determination of the release of lead and cadmium form silicate surfaces other than ceramic ware EN 1388-2:1995 |
||||||||||||||||
| 2 |
Migration
test pretreatment |
Food
safety national standard food contact material and article General principle of migration test pretreatment GB/T 5009.156-2016 |
||||||||||||||
| 3 | Identification label |
Food
Safety Nation Standard General safety require of food contact material and article GB 4806.1-2016 |
Except
for the authenticity of the product's |
|||||||||||||
| 8980-1:20175.2.4,6.5 | ||||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses
Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20175.2.4,6.5CE FO R |
||||||||||||||||
| 4 | Prismatic powers |
Ophthalmic
optics Uncut finished spectacle lenses
Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20175.2.5,6.4 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses
Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20175.2.5,6.4 |
||||||||||||||||
| 5 | Prism base setting |
Ophthalmic
optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20175.2.6,6.4 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses
Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20175.2.6,6.4 |
||||||||||||||||
| 6 |
Geometrical requirements |
Ophthalmic
optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses ISO 8980-1:20175.3 |
||||||||||||||
|
Ophthalmic optics Uncut finished spectacle lenses Part 1:Specifications for single-vision and multifocal lenses EN ISO 8980.1:20175.3 |
||||||||||||||||
| transmittance | ||||||||||||||||
|
4 CHI |
Uniformity
of uminous transmittance |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.4 |
||||||||||||||
| 5 |
Test
method of solar UV transmittance |
Sunglasses and sunglare filters Part 2:Test
Method GB/T 39552.2-20206.5 |
||||||||||||||
| 6 |
Test
method of solar blue light transmittance |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.6 |
||||||||||||||
| 7 |
Test
method of relative visual attenuation quotient |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.9 |
||||||||||||||
| 8 | Wide-angle scatter |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.10 |
||||||||||||||
| 9 |
Transmission
plane ofpolarizing filters and polarizing sunglasses |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20206.11 |
||||||||||||||
| 10 |
Spherical
power, Astigmatic power,Prism power |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20207.1 |
||||||||||||||
| 11 | Prism imbalance |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20207.2 |
||||||||||||||
| 12 |
Increased
endurance of sunglasses |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.1 |
||||||||||||||
| 13 |
Frame
deformation andretention of filters |
Sunglasses
and sunglare filters—Part 2:Test Method GB/T 39552.2-20208.2 |
||||||||||||||
| 14 | Resistance to solar | Sunglasses and sunglare filters—Part 2:Test Method GB/T | ||||||||||||||
| 9 |
1ATiONA Area to be protected by eye protectors |
Eye and face protection for occupational use —Part 1:General reguirements ISO 16321-1:20217.1.2NFORMITY A TIFICATE |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements EN ISO 16321-1:20227.1.2 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.1.2 |
||||||||||||||||
| 10 |
Headbands
and harnesses |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.2 |
||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirementsEN ISO 16321-1:20227.2 |
||||||||||||||||
|
Eye and face protection for occupational use —Part
1:General requirements BS EN ISO 16321-1:20227.2 |
||||||||||||||||
| 11 |
Quality of
material and surface of mounted and |
Eye
and face protection for occupational use —Part 1:General requirements ISO 16321-1:20217.3 |
||||||||||||||
| Eye and face protection for occupational use —Part 1:General | ||||||||||||||||