ISO12952-1/2 烟头 |
ISO12952-3/4 明火 |
ISO 12952-1:2010 ( Decree n°2000-164 of February 23rd 2000+A1:2019, relative to the safety of bedding items, Flammabiltiy: test according to ISO 12952-1:2010) |
ignition resistance for smouldering cigarette 香烟测试 |
Bedding items, example: ⎯ mattress covers; ⎯ underlays; ⎯ incontinence sheets and pads; ⎯ sheets; ⎯ blankets; ⎯ electric blankets; ⎯ quilts (duvets) and covers; ⎯ pillows (whatever the filling) and bolsters; ⎯ pillowcases. |
2 pieces of specimen as below size每种样品两件,尺寸如下: 1. Flat materials that will not normally be folded in use (e.g. mattress covers) shall either be tested using the full sample size and a larger test rig, or may be cut to (450 ± 10) mm × (450 ± 10) mm..平面材料,通常不折叠(如床罩) 2. Flat materials that will normally be folded in use (e.g. sheets, blankets) shall be cut to (450 ± 10) mm × (1 350 ± 10) mm.平面材料,通常会折叠(如被褥、毯子) 3. Bolsters and pillows may be cut to a maximum length of 450mm.长枕和枕头 4. Quilts and duvets may be cut to cut to (450 ± 10) mm × (450 ± 10) mm (edges should be sealed). The test specimens shall include two original edges.被子和羽绒被,保留两个原始边,裁剪边需封闭 |
1) The bedding items shall be washed five times depending on their care instructions, other then, depending on ISO 6330:2000 . The price would add RMB300.样品应根据洗唛或ISO 6330:2000水洗5次,洗涤费用RMB300 2) Materials which are labelled “dry-clean only” , then “dry-clean only” would be cleaned in TX lab and the clean price refer to TX pricelist.对标有“仅干洗”的,需要根据TX部门确认干洗费用(TX干洗后报价1550) 3) Products not intended to be cleaned (single-use) shall be tested as received. 对于不可洗涤(一次性使用)产品,直接做原样测试 4) If required the clean procedure and/or cycles different from EN ISO 12952, please contact FTS TS. |
ISO 12952-2:2010 |
ignition resistance for match-flame equivalent 模拟火柴测试 |
Bedding items, example: ⎯ mattress covers; ⎯ underlays; ⎯ incontinence sheets and pads; ⎯ sheets; ⎯ blankets; ⎯ electric blankets; ⎯ quilts (duvets) and covers; ⎯ pillows (whatever the filling) and bolsters; ⎯ pillowcases. |
2 pieces of specimena as below size每种样品两件,尺寸如下: 1. Flat materials that will not normally be folded in use (e.g. mattress covers) shall be cut to (450 ± 10) mm × (450 ± 10) mm.平面材料 2. Bolsters and pillows may be cut to a maximum length of 450 mm. 枕头 3. Quilts and duvets may be cut to (450 ± 10) mm × (450 ± 10) mm (edges should be sealed). The test specimens shall include two original edges.被子和羽绒被,保留两个原始边,裁剪边需封闭 |
Not folded in use (eg. Mattress. Cover): 450 x 450 mm
|
Folded in use (eg. Blanket, sheet): 450 x 1350 ± 5 mm
|
Quilts: 450 x 450 mm
|