EN ISO 6185-1
Inflatable boats-Part 1: Boats with a maximum motor power rating of 4,5 kW
最大电机额定功率为4.5千瓦的船只
EN ISO 6185-2
Inflatable boats-Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive
最大电机额定功率为4,5 kW至15 kW的船只
EN ISO 6185-3
Inflatable boats-Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
船体长度小于8米且电机额定功率为15千瓦及以上的船只
EN ISO 6185-4
Inflatable boats-Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
电机额定功率为15 kW及以上的船体长度在8 m和24 m之间的船只
如果客户追加申请RCD/CE证书,要澄清产品的类别。下面是模块和类别的定义。
请注意,A、B、C和D同时出现在模块和类别中,但它们指的是不同的澄清。
CATEGORY (focuses on wind force and wave height):
Category A (Ocean) |
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights above 4 meters |
Category B (Offshore) |
Designed for offshore voyages where conditions up to and including wind force 8 and significant wave heights up to 4 meters may be experienced |
Category C (Inshore) |
Designed for voyages in coastal waters, large bays, estuaries, lakes, and rivers where conditions up to and including wind force 6 and significant wave heights up to 2 meters may be experienced |
Category D (Sheltered Waters) |
Designed for voyages in sheltered coastal waters, small bays, small lakes, rivers, and canals where conditions up to and including wind force 4 and significant wave heights up to 0.5 meters may be experienced |
MODULE (focuses on different levels of scrutiny and involvement by notified body):
Module A (Internal Production Control) |
Manufacturer self-certifies that the product complies with the essential requirements without the intervention of a notified body |
Module A1 (Internal Production Control plus Supervised Product Testing) |
In addition to internal production control, the manufacturer must submit samples to a notified body for testing |
Module B (EU Type-Examination) |
A notified body examines a representative sample of the production to ensure it meets the essential requirements. This module must be combined with another module such as C, D, E, or F |
Module C (Conformity to Type Based on Internal Production Control) |
Following type-examination, the manufacturer ensures that the production conforms to the approved type |
Module D (Conformity to Type Based on Quality Assurance of the Production Process) |
Focuses on the quality assurance of the production process. The manufacturer implements a quality system, which is assessed and approved by a notified body |
Module E (Conformity to Type Based on Product Quality Assurance) |
Similar to Module D but focuses on ensuring the quality of the products rather than the production process |
Module F (Conformity to Type Based on Product Verification) |
Involves product verification by a notified body, ensuring each product is examined and tested to confirm it conforms to the approved type |
Module G (Conformity Based on Unit Verification) |
Each product is individually assessed and certified by a notified body |
Module H (Conformity Based on Full Quality Assurance) |
The manufacturer implements a full quality assurance system, which is assessed and approved by a notified body, covering all stages of production |